The words for honing are: a thousand grinds and a hundred folds, washing and grinding and quenching, grinding the heel and extinguishing the top.2: The structure is, honing (left-right structure) grinding (semi-enclosed structure).3: The Zhuyin is, usingㄥ_ㄇ_.4: The pinyin is, héngmó.
What is the specific explanation of honing, we will introduce it to you through the following aspects:
I. Words Explained Point here to see the plan Details
Honing hángmó.(1) Removing a small amount of material from a cylindrical surface with a whetstone to achieve the required finish or very precise dimensional tolerances.
Two, network explanation
Honing Honing (hángmó) is the finishing process of finishing surfaces with an oil stone (also known as a honing bar) set in a honing head. Honing has a larger contact area with the hole surface, and the processing efficiency is higher. Under certain conditions, the plane can also be processed. The dimensional accuracy of the hole after honing is IT7～4 grade. The dimensional accuracy of the hole after honing is IT7～4 grade, and the surface roughness can reach Ra0.32～0.04 micron. The size of the honing allowance depends on the hole diameter and workpiece material, generally 0.02 to 0.15 mm for cast iron parts and 0.01 to 0.05 mm for steel parts. The speed of the honing head is generally 100 to 200 rpm, and the speed of the round-trip movement is generally 15 to 20 meters/minute. In order to flush away chips and abrasive particles, improve surface roughness and reduce the temperature of the cutting zone, the operation often requires a large amount of cutting fluid, such as kerosene or a small amount of ingot oil inside, and sometimes also use extreme pressure emulsion.
About Honing Idioms
Thousands of grinding and honing for a hundred folds grinding brick for the mirror grinding hulling grinding hulling dipping irrigation grinding mainstay carved Li Ze kissing grinding teeth rubbing palms grinding fists grinding moving grinding heel extinguishing top cutting and polishing
About Honing Phrases
1, used for honing the inner ring, the outer ring and the raceway to improve the surface finish of the equipment.
2, Introducing a new structure for honing the inner hole of hydraulic strut on ordinary lathe.
3, honing machine as a cylinder and other parts of the important equipment for finishing, in the machining industry occupies an important position.
4, in recent years, honing processing has developed into a large material removal, high cutting efficiency of the internal hole finishing process.
5, However, the structure of honing wheel is complicated and the calculation process is annoying and difficult, so it is necessary to seek an efficient design method.
Click here to see more detailed information about honing