A, Yuyao plant decoration standards
Plant decoration involves a lot of things, especially the performance of the decoration materials, quality, price, etc., need to spend a lot of energy to complete. To ensure the quality of the decoration, reduce the cost of the decoration and improve the efficiency of the decoration, it is necessary to have a detailed factory building decoration standards. Here's a look at what Yuyao plant decoration standards:
1, ground materials
Ground decoration if you do not need to carry loads, you can consider inexpensive decoration materials, such as: anti-static flooring. Ground floor grass-roots level need to do concrete treatment, the former high cost, stable quality, the latter low price, general quality.
2, top design
Workshops are generally higher at the top, so most of the steel frame, the top should be designed for fire fighting, ventilation, and central air-conditioning. For the sake of aesthetics, available mineral wool acoustic panels and other materials to decorate the top.
3, space division
The internal division of the plant needs to be based on the actual use of the design, the plant equipment, should not use too many partitions, with colored signs to divide the area, pay attention to the data and the space of the close combination of the equipment area and the office area, taking into account the working distance, especially the interference of dust and noise.
4, clean room design
Windowless clean room closed door to set up observation windows, indoor light reflection coefficient of each surface material, ceiling and wall should be 0.6-0.8, the ground should be 0.15-0.35. The surface of the walls and ceiling of the clean room, should be flat, smooth, not gray, to avoid glare, easy to remove dust and other requirements should be reduced concave-convex surfaces, the corner of the shade into a rounded corner. Rounded corners. Interior decoration should be used in the operation, such as plastering, plastering standards should be used.
Second, Yuyao plant decoration materials have what
1, roof materials
Mainly mineral wool acoustic panels, as well as calcium silicate panels, construction is simple, low ignition point, the price is cheap. It is worth noting that the construction of the top material should be in line with the fire building. Generally speaking, plant decoration in the first to install the ceiling keel, followed by the top surface laying fire protection pipeline, such as smoke detection, sprinkler, etc., and then seal up the ceiling comprehensively, in the installation of fire fighting equipment, the corresponding smoke and fire sensors, as well as spraying neighboring head.
2, floor materials
The floor of the plant will be more wear and tear, so the choice of floor materials to be very careful, to have a wear-resistant, anti-manufacturing characteristics, and long service life. If there is a certain requirement for the load-bearing capacity of the ground, it should be added a layer of concrete on the basis of the original paving materials. If there is a demand for anti-static, should be in the plant decoration in the choice of anti-static ground material, pvc or floor material can be.
3, partition materials
In the plant decoration, you can use partition materials for the division of different functional areas. Common materials are gypsum board, glass partition, of which the glass partition is subdivided into stainless steel, aluminum composite panel, toughened three materials. These partition materials present different decoration styles and different prices. Among them, gypsum board is more often used in the plant, compared with several other low cost, more affordable.
4, fire materials
Plant electricity, machinery and equipment, in order to prevent fire and other hazards, we must focus on fire construction in the plant decoration, installation of a series of fire fighting equipment. First of all, before the installation needs to be reported to the fire department, after the completion of the same should be reported to the audit, the specific fire installation should be communicated with a professional fire company to ensure that workers have a safe working environment.
(
)