The cnc programming essentials are both manual and automated programming, and there are fixed number of overtime hours per week, dress code, team activities, and experience requirements for years of experience.
Extended information
Job requirements:
1, the appearance of the surface of the main electrode on the less than 0.2 of the outer R angle, tabulation plus more than one local magnification schematic diagrams, and indicate that this R angle manually save out.?
2, for the more complex rear mold large cover public, dismantle the electrode will sometimes encounter a small rotten surface, interference check may not generate interference body, which should be taken to the bottom of the electrode transparent to check whether there is interference. 9?New mold change: In the case of programming has been out of the electrode list, CNC has been done electrode, if you need to cancel the electrode or change the electrode list, please follow up to complete.
3, after removing the electrode, please give a list of copper male dimensions to the production management, in time for the warehouse to open the material, to avoid waiting for the opening time when CNC processing.?
4. All steel materials use LYC(ELE)? Processing module, electrode using LYC (CU) processing module, electrode to be engraved on the electrode number, such as: N66-CAV-01F (R) Note: electrode number with the ?F? for the fine male with the ?R for the coarse male, the module shall not be arbitrarily altered.
5, processing steel, absolute coordinates must be at the top of the workpiece or above, four-sided centered or unilateral centered at the bottom of the number, irregular, oversized or smaller workpieces according to the actual situation to determine, must be clearly indicated to avoid processing errors.