Everyone should take good care of the fire prevention measures and be prepared to ensure safety. Compliance with regulations is the forerunner of safety, and violations are the harbinger of fire. So how to write a fire safety emergency drill plan? Here is what I have compiled for you. Three sample essays on fire safety emergency drill plans for your reference.
? Fire safety emergency drill plan 1
? In order to ensure that our company can quickly and effectively carry out on-site emergency rescue work and effectively control and handle the accident when a production safety accident occurs, Improve the emergency response capabilities for production safety accidents, reduce casualties and property losses, and ensure the safety of enterprises, society and people's lives and properties. Based on the principle of "prevention first, self-rescue first, unified command, division of labor and responsibility", in accordance with the " The Company's emergency rescue plan shall be formulated in accordance with relevant laws, regulations and standards such as the Production Safety Law, the Fire Protection Law, the Measures for the Management of Contingency Plans for Production Safety Accidents, and the Guidelines for the Preparation of Contingency Plans for Production Safety Accidents in Production and Business Units.
? All company personnel must study this plan carefully, be familiar with its content and requirements, master emergency responsibilities and tasks, effectively conduct training and drills on emergency plans, continuously improve emergency response capabilities, and vigorously create a sense of responsibility among all employees. Focus on participation and prevention, create a good atmosphere for disaster prevention and reduction, and achieve safe and stable development.
? 1.1 Purpose of preparation
? In order to fully implement the safety policy of "safety first, prevention first, comprehensive management", strengthen emergency management work, establish and improve early warning and emergency response mechanisms and Improve the emergency rescue system, improve emergency rescue response speed and coordination and handling capabilities for production safety accidents, ensure that after various accidents, emergency rescue personnel can carry out rescue work quickly, accurately and efficiently, and minimize the impact of accidents Based on the personal casualties, property losses and social impact, this plan is formulated based on the risk identification of our unit.
? 1.2 Basis for preparation
? This plan is based on the following major laws and regulations:
? "Work Safety Law of the People's Republic of China" (Work Safety Law of the People's Republic of China) Presidential Order No. 13 of 2014) "Fire Protection Law of the People's Republic of China" (Presidential Order No. 6 of 2008) "Prevention and Control of Occupational Diseases of the People's Republic of China" Law" (Order of the President of the People's Republic of China, No. 52 of 2011)
? "Regulations on the Safety Management of Hazardous Chemicals" (Order of the State Council No. 591)
? " National Overall Contingency Plan for Public Emergency Events" (Order of the President of the People's Republic of China No. 69 of 2007)
? "Guidelines for the Preparation of Contingency Plans for Work Safety Accidents in Production and Business Units" GB /T29639-2013
? "Measures for the Management of Contingency Plans for Production Safety Accidents" (State Administration of Work Safety Order No. 17)
? "Guidelines for Review of Contingency Plans for Production Safety Accidents of Production and Operation Units" (Trial)》
? Fire safety emergency drill plan 2
? 1. Name of the plan: Fire emergency plan
? 2. Drill location: Jixiangtian Hotel Parking lot
? 3. Organizational unit: Lingguang Temple Tourism Management Office
? 4. General commander: Director Chen of the Management Office, Manager Li of the Engineering Department
? 5. Exercise time: June 5, XX
? 6. Participating departments and personnel: staff from various departments of the Tourism Management Office, totaling about 100 people
? 7. Drill category: ■Practical drill □ Desktop drill □ Question and discussion drill □ All plans ■ Partial plans
? 8. Actual drill content: Use of fire extinguishers, initial fire extinguishing
? 9. Material preparation and personnel training:
? 1. 8 8kg dry powder fire extinguishers, 2 25kg carbon dioxide fire extinguishers (borrowed); 20 fire buckets, 2 fire hooks; one alarm and loudspeaker Part 1.
? 2. Before entering the scene, the safety officer will explain the essentials of using fire extinguishers and personal safety protection requirements.
? 3. Description of the drill process: using 2 waste gasoline barrels, After being cut in the middle, it is divided into 4 sections. Add 10kg of diesel to each section. In addition, prepare 8 100kg woven bags. Fill them with soil and place them around the oil drums. At the same time, light the 4 oil drums, sound the alarm, and have people run 200m away from the surrounding area. Get the fire extinguisher and rescue equipment 100m away from the fire point. Two people can use the 25kg fire extinguisher, and one other person can use it. The personnel will automatically seize the upwind outlet to carry out fire extinguishing and rescue.
? 4. Division of personnel: Each department designates 1 Each work section designates 4 people for fire extinguishing, and other personnel rescue materials and on-site security.
? Suitability review of suitability and adequacy of the plan: ■ All can be implemented □ The implementation process is not smooth enough □ Obviously inappropriate
p>
? 5. Adequacy: ■ Fully meet the emergency requirements □ Basically met, need to be improved □ Insufficient, must be revised
? 6. Availability of drill effectiveness reviewers □ Quick and accurate ■ Basically on time In place □ Individual personnel are not in place □ Key personnel are not in place □ Responsibilities are clear and the operation is proficient ■ Responsibilities are clear and the operation is not proficient □ Responsibilities are unclear and the operation is not proficient
? 7. Materials in place On-site supplies: ■ On-site Materials are sufficient and all are effective □ On-site preparation is insufficient □ On-site materials are seriously lacking
? 8. Personal protection: □ All personnel are protected in place ■ Individual personnel are not protected in place □ Most personnel are not protected in place
? 9. Coordination and organization (1) Overall organization: □ Accurate, efficient ■ Coordination
Basically smooth and can meet the requirements □ low efficiency and needs improvement; (2) Division of labor of the rescue team: □ reasonable and efficient ■ basically reasonable and able to complete the task □ low efficiency and not completing the task
? 10. Actual combat effect Evaluation ■ Achieved the expected goals □ Basically achieved the goals, some links need to be improved □ Did not reach the goals, must be rehearsed □ External support
? 11. Report on the effectiveness of collaboration to superiors: ■ Timely reporting □ Cannot be contacted
p>? 12. Cooperation in evacuation of surrounding personnel: ■ Cooperate as required □ Not cooperate
? 13. Existing problems and improvement measures (1) Existing problems: 2 people did not wear work clothes, 4 People were not upwind when putting out the fire. (2) Improvement measures: The safety officer will provide on-site commentary, point out the wrong practices during the drill, and require the responsible person’s department and unit to supervise and learn emergency plans and fire-related knowledge.
? Commander-in-Chief: Director Chen of the Management Office Evaluator: Manager Li of the Engineering Department Recorder: Chen Hanfa of the Engineering Department
? Lingguang Temple Tourism Management Office
? June XX
? Fire safety emergency drill plan 3
? 1. Purpose of preparation
? In order to implement the "Fire Protection Law of the People's Republic of China" and effectively do a good job in putting out fires Various preparations. In the event of a fire, we will put out the fire according to the predetermined plan, evacuate the people, rescue national property, reduce losses, and prevent chaos. This plan is specially formulated. 2. Scope of application
? Applicable to the unit’s fire safety emergency management work and emergency response work such as fire fighting and evacuation when a fire occurs. 3. Working Principles
Fire emergency work adheres to the fire safety work policy of "prevention first, combining prevention and fire prevention", giving priority to protecting the safety of personnel and protecting the environment, and implements "unremitting preparation, unified command, and efficient coordination" , the principle of continuous improvement. 4. Main risks
? 1 Key fire-fighting locations
? Warehouses, passages, machinery storage areas, canteens, financial rooms, construction sites, etc. are key fire-fighting locations 5. Organizational setup and responsibilities
? 1. In order to do a good job in fire safety management and disposal, a fire safety working group is established, which is divided into command group, emergency response group, alert and evacuation group, logistics support group, rescue group, and communication liaison group according to the division of labor. .
? 2 Command Team:
? Team Leader:
? Deputy Team Leader:
? Members:
Responsibilities:
(1) Organize and formulate emergency rescue plans for fire accidents.
? (2) Responsible for the mobilization of personnel, resource allocation and emergency response teams.
? (3) Organizational leaders responsible for accident emergency response.
? (4) Coordinate related work at the accident site.
? (5) Approve the initiation and termination of this plan.
? (6) In the event of an accident, arrive at the scene in the shortest possible time, assess the possible development direction of the accident (incident), and direct each team on site to perform their responsibilities step by step, so that they can remain calm in the face of danger and command effectively. The rescue was effective and the police were called promptly.
? (7) Reporting of accident information.
? (8) Responsible for protecting the accident scene and related evidence and materials.
? (9) Organize emergency plan drills.
? (10) Accept government instructions and transfers.
? 3 Emergency response team: Team leader:
? Members:
? Responsibilities:
? (1) Under unified command Next, use various fire fighting equipment to carry out fire fighting work.
Do everything possible to save people's lives and property.
? (2) Ensure the safety of personnel, including your own safety, during on-site disposal.
? 4 Alert and evacuation team: Team leader: Members:
? Responsibilities:
? (1) Responsible for arranging safety alerts to ensure that the site is orderly and implemented Traffic control to ensure smooth traffic on site.
? (2) Strengthen security work, prohibit the passage of irrelevant personnel and vehicles, and guide fire-fighting vehicles into the fire scene.
? (3) Direct the evacuation of people in emergency situations, guide the masses to use their knowledge of escape to escape along fire escapes, and prevent the masses from entering the warning area and elevators.
? 5 Logistics support team: Team leader: Members:
? Responsibilities:
? (1) Responsible for the supply guarantee of emergency supplies under emergency conditions.
? (2) Responsible for the protection of traffic vehicles.
? 6 Rescue Team: Leader: Members:
? (1) Responsible for contacting medical institutions.
? (2) Organize ambulance vehicles, medical personnel, and equipment to enter the designated location.
? (3) Organize on-site rescue of the wounded.
? 7 Communication Liaison Group: Leader: Members:
? Responsibilities:
? (1) Responsible for communication during the emergency rescue process to ensure communication Frequently used telephone numbers should be kept open and available to ensure that emergency calls are provided to relevant parties in a timely manner.
? (2) Responsible for coordination within each group and contact and coordination with external agencies. 6. Preventive and early warning
? 1 Preventive measures
? 1.1 Conscientiously implement the principle of "who is in charge and who is responsible, and who is on duty and who is responsible?", implement the work in place, and do a good job in system implementation .
? 1.2 Strengthen safety education, carry out extensive fire safety publicity and education, and further popularize fire laws, regulations and fire safety knowledge, so that managers and front-line construction workers fully understand the importance of fire safety. Through various means such as meetings, talks, and fire prevention demonstrations, we will improve employees' awareness of fire protection, awareness of danger, and awareness of prevention and control, so that everyone knows about fire protection and everyone pays attention to fire protection. Regularly conduct fire safety training and education for all employees. The main training contents are:
? (1) Relevant fire regulations, fire safety systems and operating procedures to ensure fire safety.
? (2) Fire danger and fire prevention measures.
? (3) The performance of fire-fighting facilities and the use of fire-extinguishing equipment.
? (4) Knowledge and skills on how to call the police when a fire breaks out, put out the first fire, and self-rescue and escape.
? All workers must understand basic fire safety knowledge and master basic fire prevention and fire-extinguishing skills.
? 1.3 Regular maintenance of fire protection facilities
? In accordance with the group's fire safety management regulations, establish a fire protection facility ledger, conduct regular maintenance of fire protection facilities, and replace equipment that does not meet the requirements in a timely manner. Fire extinguishing equipment should be in good condition and ready for use.
? 1.4 Strengthen the self-inspection system, conduct fire prevention self-inspections more than twice every quarter, and supervisors and safety officers conduct fire safety inspections in the responsible area. The main inspection and supervision contents are:
? (1) The implementation of the main responsibilities for fire safety of the construction unit;
? (2) The management of fire and electricity and the key points of fire safety Location management, hidden danger investigation and rectification;
? (3) The status of special operations personnel holding certificates and the mastery of fire safety-related knowledge and skills of key project personnel and other employees.
? (4) The setting of fire protection facilities and the smooth flow of fire truck passages;
? (5) The storage and custody of construction materials and the fire and explosion prevention measures for flammable and explosive dangerous goods and places. The implementation of fire safety and the fire safety situation of other material warehouses;
? (6) Fire emergency rescue plan formulation and organization of drills;
? (7) Fire safety education situation.
? (8) Fire protection duty, inspection and facility operation and recording.
? 1.5 Establish fire prevention inspectors to be responsible for fire prevention inspections in the responsible area and keep inspection records. If there is any violation of regulations, the inspector should immediately correct the violation and properly deal with the fire hazard. If it cannot be dealt with on the spot, the inspector should immediately report to the manager in charge. The main contents of the inspection are:
? (1) Whether there are any violations in the use of fire and electricity.
? (2) Whether the safety exits and evacuation passages are smooth, and whether the emergency lighting is intact.
? (3) Whether fire-fighting facilities, equipment and fire safety instructions are in place and complete.
? (4) Other fire safety conditions.
? 1.6 Implement fire permit management. ?No open flames may be used without permission? Open fire operations must be equipped with fire extinguishing equipment and fire watchers as required, and corresponding protective measures must be implemented.
? 5.2 Alarm and alarm receiving procedures
? 1. Each employee is required to report the fire alarm and put out the fire. obligations. After discovering a fire, stay calm, immediately call for people around to put out the fire, and press the alarm button before finding the nearest fire alarm linkage. At the same time, clearly identify the direction, fire size, and fire type. When a fire breaks out, you can take advantage of the small fire intensity to put out the fire as soon as possible.
? 2 When the duty room receives the alarm, it immediately activates the fire emergency plan.
? 3. After the fire emergency plan is activated, each action group must complete their respective tasks. It is necessary to achieve calmness, orderly handling, and effective firefighting.
? 4 When a major fire occurs, based on the location, spread and severity of the threat, the person who discovered the fire should report the fire alarm to 119 and report to the supervisor at the same time, and then according to the expansion of the fire situation, notify nearby areas. The content includes the time, place, fire situation, etc. of the fire. 7. Emergency measures
? 7.1 Organizational procedures and measures for emergency evacuation
? 1. Personnel should escape along the fire escape and are not allowed to enter the warning area or the elevator.
? 2 Set up a cordon to prohibit the entry of idlers.
? 3. Organize employees to rescue valuable items while ensuring safety.
? 7.2 Procedures and measures for fighting initial fires
? 1. The initial fire is the best time to fight the fire. The first person who discovers the fire should use the fire fighting equipment around him to put out the fire. If the fire is put out in time, the fire can be avoided.
? 2. If electrical appliances or wires catch fire, you must first turn off the power to prevent electric shock and injury. Dry powder fire extinguishers can be used to put out the fire.
? 3. In order to ensure the implementation of fire safety work, personnel in each department must implement fire safety responsibility systems at all levels. After a fire occurs, fire extinguishing and evacuation must be carried out according to the work arranged in the plan. After the fire is extinguished, reports must be made quickly level by level or across levels, and the fire scene must not be cleaned up without authorization. Restoration can only be made after the public security firefighting agency has identified the cause of the fire, assessed the losses, and identified the responsibility for the accident.
? 7.3 Principles and measures for emergency rescue control at fire and fire accident sites
? 1. Principles of fire fighting and rescue:
? 1. Deploy immediately, the principle of speed and speed. Fight the first fire as early as possible. Generally, the initial fire fighting time is limited to about 3 to 10 minutes after the fire started. You cannot passively wait for the fire brigade.
? 2. The principle of saving people first and concentrating troops.
The first task of fire fighters is to rescue people trapped by fire. Concentrating forces means gathering as much fire-fighting force and fire-fighting equipment as possible in the shortest possible time, and using the fire-fighting force on aspects that have a greater impact on the overall situation of the fire scene.
? 3. The principle of control first and then eliminate. It should be controlled from top to bottom, with the top as the main priority; when the fire spreads from one end to the other end, it should be controlled from the middle; if there is a fire in the middle, it should be controlled from both sides.
? 4. Focus first and then general principles. On the fire scene, compared with people and things, rescuing people is the focus; compared with valuable materials and general materials, valuable materials are the focus; compared with other areas, areas with violent fire spreads, areas with violent fires are the focus; aspects with explosion risks Compared with the aspect without explosion, the aspect with explosion is the focus.
? 2 Fire fighting methods:
? 1. Use fire extinguishers to put out fires: suitable for putting out any fire hazard. Unplug the safety pin, aim the nozzle at the root of the flame, and press the control handle to spray concentratedly.
? 2 Use pressed sand to extinguish fire: It is suitable for extinguishing smoldering or igniting of concentrated materials, and can also be used to extinguish surface fires of flammable or combustible liquids. The thickness of pressed sand is generally 0.5 to 3.0 cm.
? 3 Use simple methods to extinguish the fire: use water, beat, and cover to extinguish the fire.
? 3 Precautions for fire fighting:
? 1. Personnel participating in fire fighting should prevent being burned by the fire, or being poisoned, suffocated and prevented from being poisoned or suffocated by the gas generated by the burning objects when putting out the fire. Cause an explosion.
? 2. When fighting fires on electrical equipment, to prevent water jets and electric shock accidents, you should cut off the power first and then put out the fire.
? 3. Fight natural gas pipeline fires: The valve should be closed quickly to cut off the gas source.
? 4. Fighting gas cylinder fires: First, close the combustible gas valve to prevent the combustible gas from exploding.
5. Fight oil fires: First, cut off the source of flammable liquid, and use water to cool the container wall of flammable liquid in the combustion zone to slow down the evaporation rate. At the same time, evacuate them to a safe area.
? 6 If the burning area expands and the burning intensity increases, the heat-carrying smoke flow and the radiant heat of the flame heat the surrounding combustibles and structures and begin to decompose, indicating that the fire has entered the development stage. To extinguish the fire at this stage, we must strengthen protection and use water cannons and fire extinguishers to control the fire. Depending on the specific situation, we can implement internal attack and close fire extinguishing. If the fire has spread, the temperature of the space will rise sharply, causing almost all the surrounding combustibles to be engulfed. When the fire begins to burn and the fire reaches a violent stage, the personnel directing the firefighting should immediately issue clear instructions to evacuate all fire-fighting personnel from the scene, and then use available equipment to control the spread of the fire and reduce the temperature while maintaining a safe distance.
? 7.4 Rescue measures for some key fire protection parts
? 1 Power distribution room
? Cause of fire: illegal use of electrical appliances; long-term overload operation; excessive voltage High; excessive current; wire short circuit, etc. causing wire fire; lightning protection device failure or defective; fire caused by lightning strike.
? Fighting method: The electrician immediately cuts off the power supply and uses a nearby fire extinguisher to fire or spray.
? Note: Do not use water hydrants.
? 2 Canteen
? Cause of fire: oil pan on fire, gas leakage, illegal use of electrical appliances, etc.
? Fighting method: Use fire blanket and fire extinguisher to shoot or spray.
? Precautions: Strictly prevent the spread of fire.
? 7.5 Dealing with the aftermath
? 1. After the fire is extinguished, the on-site fire safety personnel will be responsible for supervising the scene to prevent the fire from recurring.
? 2. Do not clean up the fire scene without authorization. Restoration can only be made after the public security firefighting agency has identified the cause of the fire, assessed the losses, and identified the responsibility for the accident.
? 3 Within 4 hours after the fire, the command team truthfully writes a fire analysis and inspection report and reports it to the Group Administration and Security Department.
? 4 Carry out fire protection rectification to prevent recurrence and impose penalties according to regulations. 8. Emergency supplies and equipment support
? 1. The preparation of emergency resources is an important guarantee for emergency rescue work. The rescue machinery, equipment, and transportation required for emergency rescue should be equipped based on the analysis of the nature and consequences of potential accidents. Tools, medical equipment and medicines, and living support supplies.
? 2 Commonly used supplies and equipment for safety accidents include:
? (1) Standby drugs: disinfection drugs, first-aid items (band-aids, bandages, sterile dressings, benzene, etc.) to stop bleeding Bags etc.
? (2) Rescue equipment: crowbars, firefighting equipment, common tools, etc.
? (3) Personal protective equipment: safety helmets, safety belts, safety ropes, goggles, gas masks, protective clothing, emergency lights, etc.
? (4) Mechanical equipment: generators, cars, water pumps, electric grinding wheel cutting machines, etc.
? (5) Other equipment: various general tools, emergency lights, etc.
? 3. Emergency supplies and equipment must be regularly inspected, regularly maintained and maintained, and must not be used for other purposes. They must be well marked to prevent failure.
? 4 After initiating the emergency rescue plan, the unit’s mechanical equipment and transportation vehicles will be integrated into the emergency rescue work. Nine contingency plan management
? 1 Release of emergency plan
? This contingency plan is formulated, revised, improved and interpreted by the unit's safety department, and reviewed by the principal person in charge of the unit. It will be released and implemented after approval by the main person in charge of the unit.
? 2 Emergency rescue training
? 8.2.1 After the plan is released, an emergency training plan should be formulated, and the personnel involved in the plan should be organized to learn, implement and practice.