Manual for Standardization of Work Safety Management
Contents
I.Enterprise Safety Management
II.Enterprise Safety Management Institution
III.Safety Management System
IV.Work Safety Goal Management
V.Work Safety Inputs
VI.Safe Construction Programs and safety technical measures
VII. Production safety education and training
VIII. Production safety inspection
IX. Dangerous source identification and production safety early warning
X. Emergency response plan and rescue for production safety accidents
XI. Prevention and control of occupational diseases and management of labor protection supplies
XII. Management of subcontracting enterprises
XIII. Safety Management Records
Basis of Work
This manual is formulated based on relevant laws, regulations, standards, and provisions such as Construction Law, Work Safety Law, Regulations on Safety Production License, Regulations on Safety Production Management of Construction Projects, Safety Inspection Standards for Building Construction, and Safety Procedures for Construction Projects, and combining with the actual situation of our company. For the contents not covered in this manual, please implement them in accordance with relevant laws, regulations and related standards and procedures.
Work Content
I. Enterprise Safety Management
(1) Enterprise Safety Production License
Enterprises shall apply for a safety production license from the safety production license-issuing authority in accordance with the law before they carry out their production and business activities; after obtaining a safety production license, they shall not reduce the conditions of safety production or transfer the license, and shall strengthen the daily management of safety production. And shall strengthen the daily management of production safety and accept the supervision and inspection of the administrative authority for the issuance of production safety licenses.
If the validity of the safety production license expires and needs to be extended, the enterprise shall apply for the extension procedures to the original safety production license issuing authority three months before the expiration date.
(B), the enterprise "three types of personnel" safety assessment
The main person in charge of the enterprise (including the legal representative, manager, deputy manager of the enterprise in charge of safety work, etc.), the project manager, full-time safety management personnel, etc., should have the appropriate level of education, professional and technical titles and Certain production safety work experience, must be qualified by the competent administrative department of construction, and obtain a certificate of safety production assessment before taking up the corresponding duties.
After obtaining the certificate of safety production assessment, the enterprise management personnel shall strictly abide by the laws and regulations on production safety, conscientiously fulfill the responsibilities of production safety management, and accept the enterprise's annual education and training on production safety and the supervision and inspection by the competent administrative department of construction and the safety supervision agency.
(C) safety record before the start of construction works
Construction should be in the construction unit to obtain a construction permit before the construction safety supervision and management agencies for construction safety production record procedures to the project location. In the safety production record procedures, carefully fill out the "construction project construction safety production record form", truthfully provide relevant information and documents, the development of safety and technical measures special safety construction organization design should be in line with the actual situation on the site, to be targeted, the compiler, reviewer, supervision engineers to sign and seal; when it comes to deep foundation pits, underground excavation works, high template works of special construction programs, should be Organize experts for demonstration and review.
When applying for the construction project safety production record procedures, the construction site of the living facilities, enclosures and other safety production, civilized construction facilities to meet the requirements of the relevant regulations, to achieve the prescribed safety production conditions, and through the local safety supervision agency's survey before starting.
(D) construction crane registration
Construction crane before the first put into use, it should be in the municipal construction administrative department or construction administrative department commissioned by the safety supervision agency for registration, registration mark should be placed on or attached to the equipment in a prominent position.
has been registered lifting equipment in the new construction projects before use, according to the relevant provisions of the inspection and testing, and to the municipal construction administrative department or construction administrative department commissioned by the safety supervision agency for the use of the record procedures before use.
(E) endangering the construction safety of the process, equipment, materials elimination
endangering the construction safety of the process, equipment, materials to implement the elimination of the system, the enterprise should be timely collection of all relevant departments of the state about the process of endangering the construction safety of the name of the directory of equipment, materials, issued to the construction site, and strictly in accordance with the requirements of the elimination, and the establishment of a monitoring and inspection mechanism, to put an end to the elimination of the process, equipment, The company has also established a monitoring and inspection mechanism to eliminate the use of eliminated processes, equipment and materials on site.
(F) Worker's compensation insurance and accident insurance
Enterprises shall pay worker's compensation insurance premiums on time according to relevant regulations.
Enterprises in accordance with the provisions of the construction site engaged in dangerous operations for accidental injury insurance, pay accidental injury insurance premiums.
Second, the enterprise safety management organization
(a) the enterprise set up a production safety leadership organization
The main person in charge of the enterprise is the head of the group, and the person in charge of each relevant department is the member, responsible for the enterprise production safety planning, management, and study and solve the major decisions and problems of production safety.
(B) production safety management organization set up and staffing
Enterprises set up production safety management organization, responsible for the enterprise's production safety management. Construction projects must set up production safety management organization, assigned full-time production safety management personnel. Construction projects should be set up by the project manager responsible for production safety management team. Construction work teams should set up part-time safety inspectors.
Production safety management organization set up and staffing in accordance with relevant provincial laws and regulations.
In addition to the establishment of a full-time production safety management organization, should also be clear production, technology, materials, finance, labor, security and other functional departments in the production safety responsibilities, the establishment of a "vertical to the end, horizontally to the edge of the" production safety management network.
Enterprises should be subordinate to the production safety management organization to provide the necessary funds for activities, equipped with the necessary tools to ensure that their normal work.
Three, safety management system
(a) all levels of production safety job responsibility system
General manager, deputy manager in charge of production, the person in charge of technology, the person in charge of the functional departments, project managers, project technical personnel, foreman, safety officer, team leader, various types of workers, etc., according to the different job responsibilities, respectively, to establish and improve the system of responsibility for production safety.
1, general manager
Law on the unit's production safety is fully responsible for, should establish and improve the production safety responsibility system and production safety education and training system, the development of production safety rules and regulations and operating procedures, to ensure that the unit's production safety conditions required for the investment of funds, the construction works undertaken by the regular and special safety inspections, and make a good record of the safety inspections.
2, the deputy manager in charge of production
The main responsibility for the production safety of the enterprise, from the organization, management, command, and coordination of the production of leadership responsibility.
3, the person in charge of technology (chief engineer)
The overall leading responsibility for the technical work of the enterprise safety production, responsible for approving the construction organization design of the first level of engineering projects, construction programs, responsible for safety and technical inspection, guidance, and timely coordination of safety and technical problems encountered in production.
4. The persons in charge of each functional department of the enterprise (safety, production, technology, equipment, education, materials, labor, finance, security, etc.)
are responsible for the work of production safety within their respective scope of business.
(2) Responsibility system for production safety management of each management department
Safety, production, technology, equipment, education, materials, labor, finance, defense, and other functional departments should establish and improve the responsibility system for production safety within their functions respectively.
1, production safety management department
Implementation of production safety guidelines, policies, laws and regulations, the development of the company's production safety, civilized construction and environmental protection management system, the development of the annual production safety work plan and measures to organize safety inspections, to participate in the investigation of accidents, the implementation of the safety responsibility system to monitor and inspect the situation of the production safety guidance on the site.
2, engineering production management department
Preparation of the production plan at the same time, to include indicators and measures of production safety, layout of the production work, the content of the corresponding safety measures, reasonable arrangements for construction and production tasks, coordination and guidance of construction, in order to prevent the cause of unsafe factors.
3, technical management
Development of safety and technical procedures, the preparation of the construction design should be developed at the same time to develop safety and technical measures, the preparation of safety special construction programs, the use of new materials, new equipment, new technologies, new technologies to develop safety and technical measures.
4, equipment management department
Organize the safety inspection of various machinery and equipment, regularly organize the maintenance and repair of machinery and equipment, equipment repair to formulate safety and technical measures, responsible for the organization of technical training and technical assessment of the mechanic.
5, education and training department
Preparation of staff safety education and training plan, organization of safety education and training, to assist the relevant departments to do a good job of the new workers of the three safety education.
6, labor management department
Organize the three-level safety education for new workers, organize the technical training of workers and the training of special types of workers, rationalize the labor organization, arrange the work and rest time according to the climate change, control overtime work, and do a good job of workers' labor protection.
7, financial management
Ensure that the safety protection, civilized construction measures earmarked for the purpose of spending, to ensure that the cost of safety education and labor protection equipment, safety facilities, summer cooling costs.
8, the defense department
Developing fire fighting system and measures, fire prevention education and inspection, check the fire fighting equipment and the use of regular maintenance of fire fighting facilities.
(C) production safety management system
1, production safety education and training system
The main content should include: the purpose, content, form, methods and requirements of safety education. The object of training and education, including employee safety education, the three-level education of new workers, change of work type education, training and safety education of special work type personnel, the use of new processes, new technologies, new equipment, safety education, weekly education at the construction site, before and after the holidays, legal and disciplinary education, and so on.
2, safety inspection system
The main content should include: the purpose of the safety inspection, the content of the safety inspection, the form of the safety inspection, the methods and requirements of the safety inspection, the inspection of the hidden dangers of accidents found in the rectification requirements.
3, safety and technical measures management system
The main content should include: the purpose of safety and technical measures management, safety and technical measures of the type, content, safety and technical measures of the preparation, approval procedures, safety and technical measures of the preparation of the requirements of safety and technical measures of the implementation of supervision and inspection of safety and technical measures.
4, the use of protective equipment management system
The main content should include: the purpose of the management of the use of protective equipment, the types and scope of protective equipment, protective equipment purchasing, purchase and acceptance of the protective equipment, the issuance and use of protective equipment, the replacement of the protective equipment requirements, as well as the supervision and inspection of the use of protective equipment.
5, safety production responsibility assessment reward and punishment system
The main content should include: the purpose of the safety production responsibility assessment, assessment content, assessment methods, for different assessment results, rewards, penalties and other provisions.
6, flammable and explosive, toxic and hazardous substances custody system
The main content should include: flammable and explosive, toxic and hazardous substances set up a special account, special management, strict check and registration procedures in and out of the warehouse; storage of flammable and explosive, toxic and hazardous substances of the warehouse focuses on fire prevention, fire is strictly prohibited; fire prevention signs and fire-fighting equipment inside and outside of the storehouse, there should be a fire escape.
7, employee casualty reporting system
The main content should include: classification and confirmation of work-related injuries, accident reporting procedures and time requirements, accident scene protection, cleanup, accident investigation procedures, accident handling, accident statistics.
8, shift safety activity system
The main content should include: the duties of the shift leader, shift part-time safety officer, the content of the shift activities, the frequency and time requirements of the shift activities, and the inspection of the effectiveness of the shift activities.
9, on-site fire management system
The main content should include: fire fighting equipment, equipment management, fire fighting equipment on the construction site and fire prevention requirements, management of fire on the construction site, rectification of fire hazards, fire prevention publicity and education.
10, civilized construction, environmental protection management system
The main content should include: civilized construction, environmental protection purposes, civilized construction, environmental protection objectives and decomposition, civilized construction, environmental protection measures, civilized construction, environmental protection management.
11, construction safety protection, civilized construction measures fee use management system
Construction enterprises should establish construction safety protection, civilized construction measures fee use management system, construction safety protection, civilized construction measures fee use for effective control and management, construction safety protection, civilized construction measures fee actually used for construction site safety production, Civilized construction, the establishment of construction safety protection, civilized construction measures to use the account, to ensure that the special funds for special purposes.
12, subcontracting enterprises, supply units of the management system
Develop the selection of subcontracting enterprises, management regulations, and with subcontracting enterprises to sign an effective contract and safe production management agreement. It establishes requirements and regulations for the control of supply units of materials, equipment and protective gear required for safety facilities, examines the production licenses or certificates stipulated by the relevant departments of the industry of the supply units, establishes a directory of sub-suppliers, conducts regular inspections and evaluations, and establishes credibility files.
13, identification of sources of danger, evaluation and management system of major sources of danger
The activities and parts of the production process to identify and evaluate sources of danger, identify major sources of danger, and formulate management measures to effectively control and reduce the risk of accidents. The major sources of danger in accordance with national and provincial requirements, reported to the competent authorities for the record.
14, pollutant control management system
Construction dust, sewage, noise, solid waste, toxic and hazardous waste, transportation spills, light pollutants generated in the production process of the enterprise to effectively control and reduce the impact on the external environment.
15, machinery and equipment management system
Effective control and management of machinery and equipment procurement, site acceptance, installation and acceptance, use, maintenance, renovation and scrapping, the development of specific requirements and measures;
The lifting equipment, boilers, pressure vessels, and other special equipment should be key to the procurement, use of key controls, according to the provisions of the relevant departments for registration and record. Regular inspection and testing should be organized, and the installation and dismantling of such equipment should be strictly controlled at the ring, and the drivers and relevant operators of special equipment should be specially trained by the relevant departments and be licensed; and corresponding safety management measures should be formulated in the use of such equipment.
16, other related systems
Four, production safety target management
(A) target setting
At the beginning of each year, the annual production safety management targets are set, including employee casualty control targets and construction site safety, civilized construction targets; the targets should be set with full consideration of the competent department's goals and targets, and should be combined with the actual situation of the enterprise, in a scientific and pragmatic manner, and with the aim of improving production safety. The actual situation of the enterprise, in the spirit of science, pragmatic, the principle of development, the development of annual goals and targets suitable for the enterprise.
(2) target decomposition
After the introduction of the enterprise's annual production safety management objectives, departments at all levels and project departments should decompose the objectives according to the requirements of the enterprise's production safety responsibility system, decompose the objectives into various departments and positions, and implement them to the people.
Departments at all levels and project departments should, within the scope of the goals and targets set by the enterprise, formulate the production safety management goals and practical measures for their departments and project departments to ensure the realization of the goals.
(C) target assessment
Enterprises should establish a safe production assessment system, regular assessment of departments at all levels, project departments, the completion of the production safety management objectives, to formulate the assessment provisions and assessment methods, the formation of assessment records and assessment conclusions.
Enterprises should be objective and notarized in the assessment of production safety management objectives, and the results of the assessment should be linked to the salary and bonus of the position of the person being assessed, to fully mobilize the staff's enthusiasm for production safety management.
Fifth, production safety input
Based on the "Construction Safety Management Regulations", must ensure that the funds required to ensure safe production conditions, the construction project budget estimates included in the safe working environment and safety measures required for the construction costs should be used for the construction of safety equipment and facilities for the procurement and updating of construction safety measures for the implementation of the improvement of safety conditions, shall not be diverted to other uses. Diversion for other purposes.
Develop relevant measures to ensure the extraction and use of funds for production safety, so that the funds are earmarked for specific purposes.
Development of enterprise safety production funds use plan, the establishment of safety protection, civilized construction measures to use the cost of accounts, for the purchase of safety protection, civilized construction facilities related bills to be retained for inspection.
Sixth, safety construction program and safety technology measures
In the construction organization design of the preparation of safety technology measures and construction site-specific construction program, with the results of the calculation, signed by the technical person in charge, the superintendent and engineer after the implementation of the full-time production safety management personnel to carry out on-site supervision.
(A) engineering safety technical measures and construction programs
All projects must be prepared in the construction organization design (construction program), in the construction organization design should be based on the construction characteristics of the project to develop appropriate safety technical measures; in accordance with the provisions of the relevant standards for the more specialized projects, the preparation of special construction programs or technical measures, mainly including:
1) pit support and precipitation works;
2) earth and rock excavation works;
3) formwork works;
4) scaffolding works;
5) construction electricity;
6) material hoist;
7) external elevator;
8) tower crane;
9) lifting and hoisting works;
10) three treasure, four mouth safety protection;
11) demolition, blasting works.
The above-listed projects involving deep foundation pits, underground excavation works, high template works of special construction programs, should also be in accordance with the Ministry of Construction and the relevant provisions of the province to organize experts for demonstration and review.
(B) seasonal construction safety technical measures
Seasonal construction safety technical measures should be prepared according to the construction characteristics of different seasons. In the high temperature, severe winter and rainy weather construction projects, should be prepared separately seasonal construction safety technical measures.
(C) the requirements for the preparation of safety construction programs and safety technical measures
1, the preparation of safety technical measures and construction programs before the construction of the project.
2, for the different structural characteristics of the project and different construction methods, for the labor organization, construction site, the surrounding environment and construction seasonal characteristics, etc., from the technical and management to put forward appropriate safety measures.
3. The contents of all safety construction programs (safety technical measures) should take full account of human, machine, material and environmental factors, and should be comprehensive and specific.
4, safety construction program (safety technology measures), should be prepared by technical staff, meet the requirements of expert verification in accordance with the provisions of the expert verification, audited by the relevant departments, by the technical person in charge, the superintendent engineer approval and signature before implementation.
5, after the approval of the safety construction program (safety and technical measures), shall not be arbitrarily modified.
6, when the construction conditions have changed significantly, the need to modify the safety construction program (safety measures), should be revised application, and re-examined and approved by the relevant personnel before implementation.
(4) The technical department and the safety production management department shall carry out regular and irregular supervision and inspection on the preparation of safety technical measures and construction programs and their implementation.
Seven, production safety education and training
In accordance with the national and provincial and municipal provisions of the content and time, production safety education and training for employees. Without production safety education and training or training assessment failed employees, shall not be allowed to work.
(a) training management
The training department of the enterprise combined with the functional departments responsible for the organization and management of training, training can take the form of internal training or outsourcing training.
(B) the training object and time requirements
1, the legal representative, deputy manager in charge of safety and the project manager shall not be less than 30 hours a year to receive safety training;
2, full-time safety management personnel shall not be less than 40 hours a year to receive professional and technical business training in safety;
3, other management personnel and technical staff Annual safety training shall not be less than 20 hours;
4, special types of operators in the professional and technical training to obtain a post operating license, still must receive targeted safety training each year, the time shall not be less than 20 hours;
5, the new workers must be subjected to the company, the project, the three levels of safety training and education of the team, and after passing the examination, can be After passing the examination, they can be put on the job. The company-level training and education shall not be less than 15 hours;
6. Workers who are waiting for their jobs, transferring or changing jobs, must receive a safety training before re-entering the workplace, which shall not be less than 20 hours;
7. Other workers shall receive safety training for not less than 15 hours per year.
(3) training content
1, national and local guidelines, policies, regulations, standards, norms, procedures, safety regulations of the enterprise;
2, professional and technical, business knowledge education and training;
3, education and training of cultural qualities;
4, safety operating procedures and job training and education;
5, safety training and education;
6, safety training and education;
7, other workers shall receive 15 hours of safety training per year;
7, other workers shall receive no less than 15 hours of safety training.
5, accident cases and warning education.
(4) training records
To make training and education records, the establishment of employee safety education and training files and related accounts.
VIII. Production safety inspection
Strictly implement the production safety inspection system, timely detection and elimination of unsafe factors, and make inspection records. After each production safety inspection, quantitative analysis and safety evaluation should be carried out to inform the inspection results.
Problems and hidden dangers of accidents found during the inspection should be rectified immediately by fixed personnel, time and measures; if rectification cannot be carried out immediately, a system of registration, rectification, inspection and elimination should be established. Before the elimination of hidden dangers, must take reliable protective measures, if there is an emergency danger that jeopardizes the personal safety of the operating personnel, should immediately stop the operation.
Construction works after stopping and resumption of work, before resumption of work should take measures to the construction site of the safety facilities and machinery and equipment, such as re-inspection and maintenance, to eliminate potential accidents.
In the rainy season, hot season, winter and other seasons to do a good job of seasonal safety inspection.
Nine, the identification of sources of danger and production safety warning
Based on the characteristics of the unit under construction, before the construction of the foundation, structure, decoration and other phases of the sub-parts of the project and parts prone to accidents, such as high and hole and edge of the work, overhead suspended operations, earthmoving and pit support, template support system, high-rise scaffolding, temporary power systems and other vulnerable to high fall, collapse and touching the ground. Identify the key links and parts where accidents such as fall, collapse and electric shock are likely to occur, conduct safety analysis of the construction process and the surrounding environmental factors, identify the weak links in the management of production safety, and formulate safety protection measures. As required, identify the possible major sources of danger, establish a major sources of danger account, formulate strict safety monitoring measures, focus on supervision and inspection, and report to the construction administrative department and safety supervision agency for the record.
According to the characteristics of the projects under construction, we regularly issue production safety warnings, such as before major festivals, rainy season and flood season construction, winter construction, the arrival of inclement weather and the peak of construction, we carefully analyze the risk factors of the Company's construction projects for work at a height, suspended operations, earthmoving and pit support, formwork support systems, high-rise scaffolding, temporary power systems, and learn y from the past of the construction enterprises in this region. Lessons learned from the accidents occurred in the same period, for the past accident-prone types, causes and weaknesses of production safety in the construction works under construction, timely production safety warning tips to the project department, in advance of the development of production safety protection measures, strengthen supervision and inspection, and strictly prevent the occurrence of major accidents.
Ten, production safety accident emergency plan and rescue
In order to improve the enterprise on the construction of major quality and safety accidents in the emergency rescue capacity, to ensure scientific, timely and orderly organization of emergency rescue work, minimize casualties and property damage, combined with its own actual situation, the development of production safety accident emergency plan.
(a) Establishment of emergency rescue system
Establishment of the general manager as the leader, the manager in charge of safety as the deputy leader, the person in charge of the relevant functional departments to participate in the emergency leading group;
Leading group can be set up under the Emergency Response Office, the expert group, emergency rescue team, equipment and materials to protect the group, the guards and security team, medical emergency team emergency response team.
(2) the main content of the emergency rescue
1, emergency preparedness
Regularly all personnel involved in emergency rescue special emergency knowledge training, so that they master the necessary rescue knowledge and rescue capabilities, improve emergency response capabilities; regular inspection and maintenance of emergency equipment, equipment, tools; regular organization of special emergency drills, and evaluation of the effectiveness of the drills. The Emergency rescue work requires multi-departmental cooperation, with public security, health, fire, civil affairs and other relevant government departments to communicate in a timely manner, close cooperation, *** with the emergency rescue work.
2, emergency response
Accident or danger occurs, should follow the "rapid, accurate" principle, in the first time to report to the Emergency Office, the Emergency Office promptly reported to the Emergency Command. Emergency command received the accident report, according to the requirements of the plan, timely start the emergency rescue system, and report to the relevant departments at higher levels. According to the level of the accident (danger), start the corresponding emergency plan and carry out the necessary rescue and relief. When exceeding the enterprise's emergency rescue capacity, request support from the higher authorities, and fully assist the public security, fire, health and other professional rescue forces to carry out the emergency treatment of accidents.
3, the end of the emergency
In accordance with the principle of "who starts, who ends", when the major accidents or dangerous situations have been effectively dealt with, the Emergency Response Command decided to end the emergency and notify the relevant units and departments. After the end of the emergency state, the relevant units should make a timely written report.
(C) other matters
1, the project manager should be based on the actual situation of the project, the timely establishment of production safety accidents emergency rescue system, the establishment of emergency rescue organizations, the development of construction site-specific emergency response plan, and regular training exercises, to be able to master the rescue methodology and skills, at any time to deal with the dangerous situation; and to ensure that the personnel, equipment and funding to implement the in place.
2, the emergency rescue equipment and equipment, to keep in good condition at all times, the departments, project managers to carry out regular maintenance, maintenance and inspection, to ensure that at any time into use.
3, after the accident, members of the Emergency Rescue Command, must be rushed to the scene as soon as possible, set up offices on the spot, in accordance with the division of responsibilities to immediately carry out rescue and relief work.
4, in the rescue period, emergency rescue headquarters members and all personnel to participate in rescue work, shall not be absent without leave, so as not to miss the accident rescue time.
(4) Management and Revision of Emergency Rescue Plan
When the emergency drill or emergency implementation is over, the enterprise emergency leading group will convene all departments and project managers to review the emergency plan, and organize the revision according to the review conclusion.
Xi, occupational disease prevention and control and labor protection supplies management
(A) Occupational disease prevention and control
1, the implementation of the construction industry labor protection work system. Establish a roster of workers in the enterprise, and carry out key inspection and protection for workers engaged in physical labor, dangerous operations and toxic and hazardous operations;
2. Identify occupational hazards according to the characteristics of the construction industry, and establish a list of occupational hazards based on the results of the identification; and formulate occupational hazards prevention and control measures based on the list of occupational hazards and strictly implement them;
3. Establish a roster of workers engaged in occupational hazards, and establish a list of workers engaged in occupational hazards, and strictly implement them;
4. Establish a roster of workers engaged in occupational hazards, conduct regular medical checkups for workers engaged in occupational hazards, and issue the required labor protection supplies;
4. Regularly carry out publicity and education on knowledge of labor protection and prevention and treatment of occupational diseases, and raise the awareness of self-protection of the general workers;
5. Try to adopt new technology, new techniques, new materials, new equipment, and other means to achieve the goal of reducing occupational hazards, and safeguarding the personal health of workers;
6. Employees' personal health;
6. Regular supervision and inspection of the implementation of measures to prevent and control occupational diseases.
(B) the management of labor protection supplies
1, conscientiously carry out the implementation of the guidelines, policies and rules and regulations to strengthen labor protection, guidance and supervision of the management of the work of the supervisory staff.
2, to enter the construction site (workplace) of the labor protection supplies, there must be "safety production license", "factory certificate", "product testing report" and other certificates, unqualified labor protection supplies shall not enter the construction site.
Enterprises should carry out regular spot checks on the labor protection products used in the construction process and stop using them immediately if they are found to be hazardous or do not meet the requirements.
3, do a good job in the management of funds for labor insurance supplies, to ensure that the funds are earmarked for timely procurement to ensure that the needs of construction production.
4, the issuance and use of labor insurance products to strengthen the management, the establishment of labor insurance products issued and the use of accounts, supervision and inspection of the use of labor insurance products; at the same time, according to the factory time of various types of labor insurance products, timely scrapping and replacement.
Twelve, the management of subcontracting enterprises
Subcontracting enterprises should be selected in the evaluation of qualified subcontractors, enter the construction site to check the subcontracting enterprise's business license, qualification certificate, safety production license, the person in charge of safety production management personnel assessment certificate, the original of the operating certificate of the special operators and retain a copy of the subcontract signed and safety production management agreement
The company has signed a subcontract and a safety management agreement, which specifies the management responsibilities and rights and obligations of both parties in terms of safety production; and regularly visits and evaluates the company and establishes a reputation file.
Include the safety training and education of subcontracting units in the scope of management, check their annual training and education status and training files, and strengthen daily training and education.
Apply for accidental injury insurance for the personnel of subcontracting units engaged in dangerous operations and pay the insurance premium.
Subcontracting companies on construction sites should set up part-time safety officers to work with the heads of subcontracting teams to improve safety, and when the number of people exceeds 50, they must set up a full-time safety officer to assist the full-time safety officer of the project department in supervising and inspecting on-site safety work.
To ensure that the subcontracting unit safe production environment and living environment, labor protection and prevention of occupational disease regulations.
Thirteen, safety management records
Safety production management process should be in accordance with the provisions of the records, retain relevant information, and timely archiving.
Necessary safety management records:
1, safety production license (original, copy);
2, safety management responsibility system;
3, safety management rules and regulations;
4, safety procedures;
5, safety management leadership team, institutional settings and staffing;
6, "three types of personnel" safety assessment of relevant information;
7, the list of special operators and management;
8, workers' compensation insurance, accidental injury insurance payment of relevant information;
9, the list of safety production investment and related bills;
10, Special construction program approval and expert argumentation information;
11, safety production education, training files and related information;
12, safety production inspection information;
13, production safety accidents and emergency rescue plan and related records of drills;
14, production accident account and related information on accidents;
15,
19, other relevant information.