Mold temperature machine water connection
Mold temperature machine water connection refers to mold temperature machine hot water, cooling water how to interconnect with the heat demand equipment, cooling water tower, water and oil mold temperature machine water connection is not the same, the following Separately water-type mold temperature machine and oil-type water circuit of the correct connection method.
A water type mold temperature machine water connection
The water temperature machine uses water as the heat medium, so the four pipeline import and export are water.
1 Cooling water inlet: through the water supply pipe and cooling water tower (or tap water) connection, the connection pipe is generally plastic pipe.
2 Cooling water outlet: through the drain pipe connected to the cooling water outlet, the cooling water from the water heater discharge, usually the drain pipe will be connected to the water tower to form a circulating water to continue to use.
3 Heat media outlet: hot water through the heating system is connected to the heat media inlet of the heat demand equipment through the Teflon tube, and the heat media is continuously fed into the heat demand equipment.
4 Thermal inlet: The hot water after passing through the heat demand equipment is connected to the thermal inlet of the molding machine through another Teflon pipe, so that the hot water returns to the circulating system of the molding machine to continue to circulate and heat.
Second, the oil mold temperature machine water connection
Oil temperature machine cooling water in and out of the pipeline for the water, the connection is consistent with the water temperature machine.
Mold temperature machine water connection, in addition to a clear understanding of the import and export of heat medium and heat equipment connected to the cooling water import and export to the cooling water tower connection, but also pay attention to the connection of the pipeline, mold temperature machine import and export whether to install filters and other issues, so as to make the mold temperature machine can be more long and stable operation