The Industrial Connector is a new type of connector that has been specifically designed to build a robust Ethernet connection in harsh environments that is tougher, stronger, and more resilient than previous connectors. This new interface is commonly referred to as an "industrial connector" and its applications are not limited to the manufacturing industry. The connector is designed to withstand the harshest industrial environments.
Expanding knowledge
What is a connector
A connector is two or more containers that are connected below the liquid level. Connectors that hold the same liquid and have equal pressures at the liquid level are equal in height.
(1) connectors contain the same liquid, but the pressure on the liquid level is not equal, then the pressure difference at the liquid level is equal to the pressure difference generated by the difference in the liquid level of the two containers in the connector.
(2) connector pressure on the liquid surface is equal, but the two sides of the different liquids are not mixed, since the interface from the height of the two liquid surfaces and the density of the liquid is inversely proportional. Connector principle has a wide range of applications in engineering. Such as a variety of liquid level meter (water level meter, oil level meter, etc.), mercury vacuum meter, liquid column air pressure meter, differential pressure meter, etc., are made by applying the principle of connector. By understanding the definition and working principle of the connector helps us to better understand and develop the connector market.
What are industrial connectors for
1, industrial connectors are essential miniature coupling plugs and sockets, through the pins of the industrial connector can be directly connected to the printed circuit board (PCB) between the power supply and signal. Industrial connectors usually use copper alloy, over the years to prevent oxidation to prevent the conductivity degradation.
2. In electronics manufacturing, the entire device may need to fit into the available space, and if the PCB tends to take up too much space at the circuit board design stage, the device may be split into two or more boards. Industrial connectors can connect power and signals between boards to complete all connections.