One, what are the specifications for the installation of decorative sockets?
1, each of our premises, different places and locations, as well as the design pattern. Socket installation in these different types of places are different heights, and distance from the national norms standard design. If the socket is installed in the bedroom wall, then the height from the ground for 1.2 meters to 1.4 meters, the distance from the door is about 15 meters to 20 meters, the installation is too short is a security risk, the installation is too high on the daily use of very inconvenient.
2, to look at the socket switch, we used to commonly pull the cable switch, the height of the installation, that is, the height from the ground, should be 2 meters to 3 meters or so, the other end of the cable switch can not be too far away from the switch, at least should be in the 100mm or less, the cable switch should be vertical down.
3, bathroom outlet installation also need to standardize the general bathroom is a wet, water flow places, it is easy to appear dangerous. Then the switch and socket installation must ensure safety, so the socket on the installation of a protective cover to avoid water flow wet switch socket, the distance should be away from 1.4 to 1.8 meters, preferably in 1.5 meters or 1.6 meters or so.
Two, socket installation should pay attention to what
1, bedroom socket
Bedroom electrical appliances are relatively small, but the socket can not be left uninstalled, first of all, the head of the bed on each side of a socket, easy to use lamps and cell phone charging. If there is a TV in the bedroom, the TV wall also needs one or two sockets, especially the strong power and weak power sockets are not missing.
Bedroom also consider the installation of air conditioning, so to reserve a high plug seat, it is best to choose a switch socket, so that the air conditioning is not in use, do not need to unplug. Finally is the bedroom dresser, remember to reserve a few sockets for the use of mirror lamps and hair dryers, curling irons, etc. to provide convenience.
2, the living room outlet
Living room is the most large electrical appliances in the area, the number of outlets is relatively large, in the installation of outlets should be based on the placement of electrical equipment and the ease of use of the homeowner to install. Generally speaking, its outlets are centrally installed, which is why we often see a row of plug seats on the TV wall or sofa wall.
Living room to plan a good outlet, otherwise it will bring trouble to the back of the use of electrical appliances, but also make the whole installation process is inconvenient, especially some electrical appliances need to use three-hole sockets, are to be calculated in advance. It is best to install a socket on the ground under the coffee table to facilitate the cooking of tea and water.
3, the number and location of sockets
Socket installation before, it is important to plan the number and location of them, in the installation of easy to confusion, it is difficult to install accurate, not only messy, but also easy to electrocute. Maybe you will say that less installation is good, can home appliances are always increasing, it is easy to appear not enough.
So sockets in the installation, to calculate the approximate number of sockets in advance. The distribution of the location of the socket is also critical. To take into account whether it will be blocked by the furniture problem, be blocked can not be used, it is better not to carry out the installation.
What are the specifications for decorating outlet installation? In the renovation of the house to install the socket, the owners if free can be on the sidelines to supervise the decoration master whether in accordance with the relevant norms to install. What to pay attention to when installing the socket? Socket installation must be able to put safety in the first place, if not good safety aspects, out of the effect will be much worse.