How to set kg316t time control switch: unlock the panel - calibration time, minutes, weeks - timing (switching time) - automatic - recovery, the specific operation steps are as follows:
1, first press the "Cancel/Restore" button to unlock the screen, as shown in the figure.
2. Press the "Time Calibration" button to calibrate the hours, the "Minute Calibration" button to calibrate the minutes, and the "Week Calibration" button to calibrate the weeks.
3. Press the "Timer" button again to set the switching time, as shown in the figure.
4. Press "Timing" again to set the second switching time, and so on. You can set it more than 10 times, but usually you only need to set it once.
5. Press the "Auto/Manual" button and turn it to "Auto", then the machine can be turned on and off at fixed times.
6. When the setup is complete, press the "Cancel/Resume" button to lock the screen and finish.
Precautions:
1, please do not use the timer switch for equipment (such as medical equipment and large-scale equipment) that may cause personal injury or death or have a significant impact on society due to incorrect timer switching.
2. For equipment (such as large heaters or cold rooms) that may cause major property damage due to a timing switch error, make sure that the characteristics and performance values of the timing switch are sufficiently margined and that safety measures such as double circuits are taken when using the timing switch.
3. Do not repair, disassemble or remodel workers by yourself. Please entrust repairs, inspections, etc. to a dealership or turning unit.
4. Do not touch the terminals after connecting the power supply.