Synchronous belt sliding table module is mainly composed of: belt, linear guide, aluminum alloy profile, coupling, motor, photoelectric switch and so on.
The working principle of synchronous belt sliding table module is: the belt is installed in the linear module on both sides of the drive shaft, which serves as the power input shaft, in the belt is fixed a piece of slider used to increase the workpiece of the equipment. When there is input, by driving the belt and make the slider movement.
Often synchronous belt slide module after a specific design, on its side can control the tightness of the belt movement, to facilitate the debugging of equipment in the production process.
Synchronous belt slide modules can be selected according to different loads need to increase the rigidity of the guide to improve the rigidity of the linear module. Different specifications of the linear module, the upper limit of the load is different.
The accuracy of the synchronous belt slide module depends on the quality of the belt and the machining process in the combination, and the control of the power input will have an impact on its accuracy at the same time.
Dongguan Aoming 10 years of professional synchronous belt slide module development and production.
Screw module is composed of: ball screws, linear guides, aluminum alloy profiles, ball screw support, couplings, motors, photoelectric switches and so on.
Screw module use noise, high cost. Now the use of fewer people.