1, the printer cartridge out. Color printers have black cartridges and color cartridges, black and white printers only have black cartridges.
2, the cartridge label sticker removed, affixed to the side of the cartridge or he out, we can see the cartridge cover has five small holes, which is the color cartridges red, yellow and blue 3-color cartridges, a corresponding color as shown in the figure. Black cartridges on any hole to add ink can be.
3, the ink will be opened, the syringe will be inserted into the ink to extract ink, about 3ml ink.
4. This is in accordance with the corresponding color to extract the ink added to the cartridge. Note that the minute ink with separate syringes, not mixed. Syringe shallowly inserted into the sponge of the cartridge, slowly injected into the ink so that the sponge completely absorbed, not easy to add more, otherwise it will leak.
5. After the injection is complete, the syringe will be labeled with a different sticky note to mark the use of color, to prevent future mixing. I used different colors of tape.
6. Stick the cartridge label back on, being careful not to cover the air leakage holes, as shown in the black circle.
7. Finally, put the cartridge back into the printer can be used, if the cartridge has not been used for a long time, please add ink and leave it for 1 hour before use.
The above is the office equipment printer cartridges how to load the ink method, I hope to provide help.