Organization 1. workbench consumables, tools, fixtures, meters and other useless or temporarily useless items must be removed
2. production line should not be placed on the excess items and no falling parts
3. the ground can not be placed directly on the finished product, parts, and falling parts
4. defective products should be placed in the defective area
5. work area should be marked and distinguished
6. p>
5. Work area should be marked and differentiated
6. Items placed in the work area should have a sense of wholeness
7. Items of different types and purposes should be managed separately
8. Personal belongings should not be present in the work area
9. Power cords should be well managed and should not be messy or thrown to the ground
10. The color of the marking tape should be clear (green for fixed, yellow for mobile). Green for fixed, yellow for mobile, red for bad)
11. Cardboard, plastic box should be placed in parallel, vertical
12. No use of jigs, tools, cutting edge should be placed in the tool rack
13. Jig racks on the long-term non-use of molds, jigs, cutting edge and frequently used items should be distinguished
14. Measuring tools should be placed without other items placed
14. Placement of measuring tools should not be placed on other items
15. assembly machinery equipment can not be placed on the excess items
16. work tools placed in a way that is easy to place
17. jobs can not be placed on the unnecessary tools
18. jig racks can not be placed on the jig of miscellaneous items other than jig
19. parts racks, benches, cleaning cabinets, trash cans should be placed in a designated area. Parts racks, workbenches, cleaning cabinets, trash cans should be placed at right angles to the level of the designated signs
Tidy 20. Consumables, tools, jigs, meters should be placed at right angles to the level of the designated signs
21. Trolleys, trolleys, trolleys, forklifts should be placed at right angles to the level of the designated signs
22. Parts, parts boxes should be placed at right angles to the level of the designated signs neatly
23. Cross-approved and finished product boxes should be placed neatly at right angles to the designated marking place
24. Parts should correspond to the code, and the code should not be covered
25. Empty boxes should not be placed haphazardly, and should be neatly and beautifully organized and recycled in a timely manner
26. Substrate items should be placed horizontally and at right angles to the designated marking place
27. Wire drop machines, samples, and checking equipment should be placed at right angles to the designated marking place
28. Should be placed at right angles to the level of the designated sign place
28. The storage of documents should be separated according to the different contents of the storage and detailed famous
29. Signs with the tape should be free of damage, no wrinkles in a horizontal right-angled state
30. Signs, instructions, a bite of the standard, the project logo should be placed at right angles to the level of the designated sign place
31. Publicity whiteboards, The content of the bulletin board should be changed at the right time, and the responsible department and the name of the person in charge should be indicated
32. The chairs in the rest area should be rearranged after resting
33. Cleaning utensils should be put into the cleaning cupboard or the designated place after use
34. Items should not be placed on the passageway
35. The places where the items are not allowed to be placed (except for the passageway) should be labeled
36.
36. All kinds of cabinets, shelves, amount of placement should be clearly identified
37. Semi-finished products should be clearly identified
38. Finished products, parts and components can not be placed directly on the ground
39. Defective products should be placed in the area should be clearly defined
40. Defective products placed on the site should be differentiated by red color and other colors
Rectification 41. Defective product placement site should be set up in a conspicuous place
42. Repair products should be placed outside the production line
43. Parts placed in the place of the identification of the representation should be complete
44. Plastic boxes, bundles of materials should be labeled with the name of the product
45. The placement of the location of the work tool can not walk or bend down in order to be able to place the placement of the work tools
46. The work tools should be placed in a place where you can let go of your hand
47. There should be a margin for work tools
48. There should be a code on the jigs and tool racks and an indication of the items
49. The code on the racks should be clearly identifiable in front of the racks
50. The jigs and tool racks should be imported in different colors to differentiate them
51. Whether the jig is placed according to the frequency of use, the higher the frequency of use of the placement of the closer
52. jigs, tools should be placed in sets according to the category of finished products
53. placement of finished products should be differentiated according to the type of model
54. placement of finished products on the site of the access and placement of the venue should be drawn to indicate that the distinction between the line
55. finished products should be coded (number), the number of Packaging materials and finished products should be stacked at a specified height
57. Fixture racks should be placed in such a way that they can be easily removed
58. Undeclared defective measuring tools should not be used (the color of the precision check is indicated by a sticker)
59. Measuring instruments should be placed in such a way that they are protected from dust and rust
60. Private cups should be placed in the cup holder according to the regulations
61. Measuring instruments under the tray should be used rubber and other cushioning materials
Sweeping 62. The floor should be kept free of dust, crumbs, confetti and other debris
63. The corners of the walls, baseboards, under the equipment should be the focus of the sweeping area
64. The floor impregnated with oil should be washed
Cleaning 65. workbenches, filing cabinets, jigs, cabinets, shelves, doors and windows should be kept dust-free, oil-free
66. equipment, distribution boxes should be kept dust-free, oil-free
67. the ground should be cleaned regularly, to keep free of dust, oil-free
68. work shoes, work clothes should be neat and clean, not scribbling
69. assembly machinery The body should not have rust and paint peeling, and the cover should be free of peeling
70.Cleaning cabinet and cleaning utensils should be kept clean
71.Do not do things that are not related to the work
72.Strictly abide by and implement the company's rules and regulations
73.Commute to and from work on time, punch in and out of the office on time, do not leave early, do not arrive late, and do not absenteeism
74.Active Seriously do morning and evening orders on time
75. Tie your hair according to the regulations and requirements
Cultivation 76. Wear work shoes, work clothes, wear a tie, factory ID, no jeans according to the regulations
77. Smoking should be done at the prescribed place, not in the work area
78. Wash your hands before work and meals, clock in and out, queue up for meals, don't cut in line
79.
79. Gloves should be put on as required
80. Basic etiquette should be maintained towards supervisors
81. Do not spit, do not throw garbage casually, and pick up and put away the garbage immediately upon seeing it
82. No food is allowed to be eaten during working hours, such as breakfast, snacks, and other things
83. Good personal hygiene should be observed
Safety 84. Dangerous goods should be clearly labeled
85. There should be no accumulation of items in front of the safety exits
86. Fire extinguishers should be placed in the designated location and in a usable condition
87. There should be no items placed in front of or under the pin
88. The amount of flammable products should be within the allowable range of the amount of flammable products to be available
89. All All fire fighting facilities and equipment should be in normal operation
90. No objects are sticking into or occupying the passageway
91. The switching and use of air-conditioners, elevators and other large-scale facilities and equipments should be assigned to a full-time person or regulations should be formulated
92. Whether there is any abnormality of power supply, wiring, switches or sockets
93. Strictly prohibit unauthorized operation
94. 94. easy to dump the goods should be taken to prevent the fall of measures
95. whether there is fire left
office 96. desktop stationery and documents placed in a neat and orderly
97. whether the items are essential
98. whether the garbage is dumped in a timely manner
99. desks, computers, and other office facilities are clean and dust-free
100. personnel grooming and appearance
100. 100. Personnel are well-groomed, in good spirits, and are working hard