Ultrasonic cleaning equipment in use, it is important to pay attention to the frequency in the manufacturer said to provide the instruction manual recommended range, shall not be adjusted to a larger or smaller frequency for cleaning, so as to avoid the time on the ultrasonic cleaning equipment to cause damage. At the same time, ultrasonic equipment, ultrasonic frequency is higher will make the liquid generated within the bubble size is reduced, which will make the cleaning intensity is also correspondingly weakened. Therefore, ultrasonic cleaning equipment manufacturers recommend the use of medium frequency cleaning is good.
2. Note that the running time
Ultrasonic cleaning equipment running time must pay attention to the proper control, in general, ultrasonic cleaning equipment should not run for many hours. Because the longer running time of the equipment may cause damage to the anilox roller surface and mesh cavity wall inside the equipment. At the same time, note that after the end of the ultrasonic cleaning equipment, the adjustment button should be returned to zero. In addition, it is recommended that users use ultrasonic cleaning equipment before the more difficult to clean the parts after pretreatment system, and then put into the ultrasonic equipment is appropriate to clean, so that the equipment running time is greatly reduced.
3. Pay attention to check the cleaning of the product
Ultrasonic cleaning equipment is not the essence of cleaning by vibration to achieve the purpose of cleaning, vibration is only the work of the transducer in the inevitable by-products. Ultrasonic cleaning equipment on the quality of the higher density of the cleaned object will produce *** vibration effect, so long as there is no defective items, the general micro-vibration will not have consequences. But the ceramic anilox belongs to the high density and brittle items, such as damage to the cracks in the place, *** vibration will be easy to make it more expanded, so carefully check before cleaning.