What does the filter do Why install the filter

Filter (filter) is an indispensable device on the pipeline for conveying media, usually installed in the pressure reducing valve, pressure relief valve, water level valve, Fanggong filter, the inlet end of other equipment. The filter consists of a cylinder, stainless steel screen, drainage part, transmission device and electrical control part. After the water to be treated passes through the cartridge of the filter screen, its impurities are blocked, and when it needs to be cleaned, it is enough to take out the removable cartridge and reload it after treatment, therefore, it is extremely convenient to use and maintain.

Categorized according to the filter medium: air filter, liquid filter, network filter, light filter.

Performance characteristics:

1. High-efficiency, precise filtration: the special structure of the filter disk filtration technology, precise and sensitive performance, to ensure that only particles with a particle size smaller than the required size can enter the system, is the most effective filtration system; specifications of 5μ, 10μ, 20μ, 55μ, 100μ, 130μ, 200μ and other kinds of specifications, the user can choose a different precision of filter disks according to the water requirements. Users can choose different precision filter disks according to water requirements. The flow rate of the system can be adjusted flexibly according to the needs.

2. Standard modularization, saving space: the system is based on the standard disk filter unit, according to the modular design, the user can according to the need to take, flexible and interchangeable. The system is compact, occupies a very small area, can flexibly utilize the corner space for installation, such as water treatment capacity of about 300m3/h equipment occupies an area of only about 6m2 (general water quality, filtration level of 100μ).

3. Full-automatic operation, continuous water discharge: between the units in the filter combination, the backwashing process alternates in turn, and the automatic switching between working and backwashing status ensures the continuous water discharge; the backwashing water consumption is very small, accounting for only 0.5% of the water discharge; if it is combined with the air-assisted backwashing, the self-consumption of water can be reduced to less than 0.2%. High-speed and thorough backwashing can be completed in just tens of seconds

4. Long life: the new plastic filter element is sturdy, non-abrasive, non-corrosive, minimal scaling, and after years of practical verification of industrial use, the use of 6 to 10 years there is no abrasion, will not age, filtration and backwashing effect will not deteriorate due to the use of time.

5. High quality, low maintenance: the product meets the appropriate quality standards, all the products in the factory are simulated working conditions before testing and test run, no special tools, few parts; easy to use, only regular inspection, almost no routine maintenance.