Working Principle of Tape Coater

The working principle of the tape applicator is to place the object to be wrapped in the center of the turntable, start the turntable motor to rotate, which naturally drives the turntable to rotate, which realizes the object to be wrapped around the periphery of the film machine. At the same time the elevator motor is also started, driving the whole combination of the winding and strapping machine to do up and down movement, to achieve the winding of the object height direction, which realizes the winding and packaging of the whole appearance of the object.

The coating of raw paper by tape coater can be divided into single-side coating and double-side coating. Single-sided coating is only one side of the original paper coating, such as single-sided coated paper; double-sided coating is on both sides of the original paper are coated with paint, such as double-sided coated

paper. Whether single-sided coated paper or double-sided coated paper can be divided into single-layer coating (primary coating) and double-layer coating (secondary coating) for the double-layer coating is used to produce higher quality requirements, coated with a larger amount of coated printing

paper. Double-coated paper than single-layer coated paper with better printing suitability, is an effective way to improve the quality of coated paper.

Tape coating machine workflow: rolls of substrates, such as: paper, cloth, leather, aluminum foil, plastic film, etc., coated with a layer of a specific function of the adhesive, paint or ink, etc., and drying and winding.

Tape machine manufacturer, the main part of the tape machine consists of temperature control part, deskewing part, printing part, drying part, slitting function, speed control part, temperature control part.

a.The speed-regulating part adopts advanced stepless speed-change motor, which can continuously adjust the working speed high and low at will.

b.Temperature control part adopts advanced electronic temperature control, the temperature is automatically adjusted to achieve automation.

c. Correcting part of the foreign advanced technology, installed with high sensitivity automatic correcting instrument and with infrared high-sensitivity probe is enough to ensure that the machine produces products with neat corners without waste.

d. The printing part comes with two-color gravure cylinder printing, and the printing width is the same as the width of the coated substrate.

e.Drying part adopts the latest electric vapor heating. Segmented temperature control hot air circulation is heated evenly, temperature LCD digital display, the host electric power is only 1.1 kW heating power according to the size of the equipment.

f. Slitting function comes with a slitting function does not need to be equipped with another slitting machine, slitting width can be adjusted arbitrarily, tension control, slitting length, automatic counting of any set length, and automatic shutdown really achieve the flow of fully automatic production.