Borrowing agreement model 3

Car Borrowing Agreement

Party A (lender): Dandong Jiangwan Metallurgical Materials Co.

Party B (borrower): Dandong Yeli Metal Manufacturing Co. Vehicle status

1, Party A will be a self-use minivan lent to the use of Party B, license plate number

2, the vehicle is in good condition, and attached to the vehicle license, the vehicle formalities, insurance (full coverage), tax, check the word, road maintenance fees are complete.

3, the two sides before handing over the vehicle, you need to carefully check the documents and procedures, and will be cleaned vehicle to the other party, so that the other party to check the appearance of the vehicle.

Second, the loan period

1, the loan period from _______2011____11____1_to November 1, 2015. 2, Party A shall deliver this vehicle to Party A within 10 to 15 days after receiving the returned vehicle and confirming that there is no damage to the vehicle and illegal blasting after the expiration of the loan contract letter or the termination of the contract by mutual agreement.

Third, the lender's rights and obligations

1, Party A to ensure that the source of the vehicle provided to Party B is legal, complete procedures, property rights belonging to Party A himself.

2. Party A has the right to take back the loaned vehicle at any time and any place when any of the following situations occur.

(1) Party B uses the borrowed vehicle to engage in illegal and criminal activities.

(2) Party B lends, sublets, sells, mortgages or pledges the loaned vehicle.

(3) Party B has the danger of damaging the vehicle intentionally.

(4) Other activities that jeopardize the legitimate rights and interests of Party A's vehicle.

Party B shall compensate Party A in full for any economic loss caused by the above circumstances.

3. Other lender's rights in accordance with laws and regulations.

Fourth, the borrower's rights and obligations

1, Party B need to submit to Party A agreed to the driver's identity card and driver's license and its copy, Party B to provide information to Party A should ensure that the true and effective, otherwise the responsibility arising from Party B.

2, Party B should provide information to Party A to ensure that the driver's identity card and driver's license and its copy.

2, Party B has the right to use the borrowed vehicle during the borrowing period stipulated in the borrowing contract, Party B shall not use the vehicle for commercial business or freight transportation, and shall not use the borrowed vehicle for the behaviors prohibited by the national laws and regulations, or else it will bear all the consequences arising therefrom.

3, Party B shall not sublet or sublet the borrowed vehicle to others, otherwise it will be regarded as a breach of contract, and in case of traffic accidents and illegal behaviors, Party B shall bear all the criminal responsibility, economic losses, all the maintenance costs and accelerated depreciation.

4. Party B guarantees the safe use of the vehicle, and Party B shall bear all the criminal responsibilities, economic losses, repair costs and accelerated depreciation costs in case of traffic accidents and illegal behavior.

5, Party B borrowed the vehicle before the loan of the existing damage to bear the compensation, repair obligations, only responsible for the loan period of the vehicle damage and improper use of the vehicle failure. Party B has to bear the wear and tear due to the normal use of the vehicle under the conditions of failure and maintenance costs.

6, Party B will bear the fuel cost and road and bridge tolls of the borrowed vehicles during the loan period, and issue fuel invoices, due to improper use of fuel caused by damage to be borne by Party B.

7, Party B in the loan period should strictly abide by national laws and regulations, and bear all the responsibilities and economic losses due to violations, illegal accidents and other acts, including but not limited to violation of fines, demerit points, such as driving license was deducted, was deducted during the period of costs by Party B.

8, Party B is responsible for the loan period of the vehicle accident for the vehicle insurance accident damage, insurance claims and maintenance and other matters, and bear the maintenance of the vehicle during the period of fees.

9, Party B in the use of vehicles, should be properly arranged for the vehicle parking space, to avoid parking dangerous places, resulting in vehicle damage and economic loss, Party B is responsible for.

10, Party B shall comply with the obligations of the "Notice to Borrowers of Automobiles".

Fifth, the insurance terms

1, Party A has borrowed the vehicle to provide appropriate insurance, the types of vehicle insurance provided include: theft, third-party liability, drivers and passengers, deductible, car damage, windshield, spontaneous combustion, scratches, compulsory insurance.

2, in the event of a traffic accident, Party B should be the first time, not later than one hour to notify Party A, Party A to assist in guiding Party B to deal with the accident, the accident vehicles sent to the designated repair shop, Party B shall not be the vehicle in the non-designated repair shop repairs, if due to the maintenance of the non-designated repair shop caused by the failure of the vehicle quality assurance agreement, by the Party B to bear all the economic losses.

3. If the vehicle is stolen, scrapped or lost during the period of borrowing the vehicle, Party B shall bear 50% of the cost of borrowing the vehicle from the date of loss to the time of compensation by the insurance company and the insurance deductible part.

4. The borrower shall bear all the losses and related expenses caused by the insurance company's refusal and deductible due to the borrower's reasons.

5, the borrowed vehicle in the borrowing period of the third-party liability borne by Party B, in the insurance company to pay all the costs before the claim by Party B, Party A only to purchase insurance

Page 2 / 4

of the third-party liability insurance payout limit to assist you to solve the third-party liability compensation, and the rest of the payout and responsibility for the Party B is responsible for.

6. Party B shall not be responsible for any damage to the vehicle caused by unforeseen and uncontrollable human factors such as earthquakes, floods and landslides.

VI. Change and termination of the contract

1, the change and termination of this contract, must be signed by both parties to the written agreement to be effective.

2, after the expiration of the loan period, Party B should return the vehicle and the relevant procedures, Party A has the right to inspect the vehicle, all normal, the agreement will be lifted.

3, Party B to return the borrowed vehicle procedures are not complete, should bear the cost of making up the procedures required.

Seven, the contract from the borrowing parties signed and sealed that will come into force

This contract in duplicate, by the A and B each party to take one.

Party A (lender):

Party B (borrower):

Year month

Borrowing Agreement Model Article II:

Instrument Borrowing Contract

Party A (lender):

Party B (borrower):

The Party A (lender):

According to the "Chinese People's *** and the State Contract Law" and the relevant provisions of the clear rights and obligations of the lender and the borrower of the relationship between the two sides by mutual consensus, the signing of this contract.

Article I. Basic situation of the borrowed property and accessories

The lender and the borrower *** with the inventory of the borrowed equipment and its accessories, and draw up a list of equipment (Annex I). The list shall be confirmed by the signatures of both parties and shall be attached to this contract and shall have the same legal effect as this contract.

Article 2 Borrowing use and location

1, the use of the equipment:

2, the use of the equipment location: .

3. Party B guarantees that, during the loan period without Party A's consent, it shall not be used for other purposes without authorization, and shall not move the equipment to other places for use.

Article 3 Borrowing period

The lender will hand over the equipment to the borrower for use from _________ ______ ______ onwards, and take it back from _________ _______ _________ onwards.

Article 4 Maintenance of Borrowed Property during the Borrowing Period

1. The Lender guarantees that the Borrowed Instrument is in a suitable and safe condition at the time of signing this Contract and delivering it to the Borrower for use.

2. During the period of borrowing, the Borrower shall take good care of the borrowed equipment and do the necessary maintenance. The natural wear and tear of the borrowed equipment and man-made failures affect the normal use of the borrower to carry out maintenance.

Article 5: Change of lender and borrower

During the lending period, the lender can not lend the borrowed equipment to a third party.

Article 6 Return of borrowed property and renewal of loan:

1. At the end of the loan period, the borrower shall return the borrowed instrument to the lender on time.

2, the loan period, the borrower if you need to renew the loan should be in the contract in the provisions of the expiration of the loan period in _____ days before the written notice to the lender, in the lender agreed to re-sign the contract.

Article VII Responsibility for breach of contract

1, the lender should ensure that the borrowed instrument in the borrowing period in line with the agreed purpose.

2, the borrower should comply with the obligation of proper use, violation of this obligation caused by abnormal wear and tear of the borrowed objects, should be self-maintenance, and to ensure that the return of the equipment is in a normal state of use. If the equipment can not be used normally or the quality of the return of a significant decline in accordance with the current price of equipment or accessories to be compensated.

3. The borrower should take good care of the borrowed equipment during the borrowing period. If the borrowed equipment is damaged or lost due to the violation of this obligation, the borrower should bear the compensation responsibility according to the current price of the equipment or accessories.

4, without the consent of the lender, the borrower shall not improve the borrowed object, add behavior; otherwise, the lender may require the borrower to restore the original state, compensation for loss or recovery of the borrowed object.

5, the borrower without the consent of the lender will loan the borrowed goods to a third party, the lender may require the recovery of the borrowed goods or require the borrower to pay compensation in accordance with the current value of the equipment or accessories.

6, the termination of the loan contract, the borrower without good reason to delay, do not return the borrowed goods and do not handle the renewal of the loan, more than the period of time stipulated in the loan contract in accordance with the use of equipment per day yuan to pay the rent. Article VIII dispute resolution

The parties in the fulfillment of this contract in the process of dispute, should be resolved through consultation; consultation can not be resolved to the court.

Article IX Other Agreements:_ Instruments borrowed during the period, where the damage caused by the instrument or parts, accessories, or lost, the borrower bears full responsibility, and is responsible for the maintenance of damaged instruments or parts, as well as the reimbursement of the lost instrument, maintenance generated by the direct and indirect costs borne by the borrower, and the loss of the instrument borrower needs to be in accordance with the instrument's original producer and the original number of the prototype to be compensated.

Article 10 This contract is not exhaustive, all in accordance with the "Chinese People's *** and the State Contract Law" of the relevant provisions of the contract by the contracting parties *** with the consultation, to make additional provisions, additional provisions and the contract has the same effect. Article 11 This contract shall be signed in _____ copies, each party to the contract shall execute one copy.

Lender: (seal) Borrower: (seal) Responsible person: (signature) ______________ Responsible person: (signature) __________________ Entrusted agent: (signature) ___________ Entrusted agent: (signature) __________________

Signing Time: ________ year ____ month ___ Signing time: ________ year ____ month ___

Borrowing agreement model article three:

Valuables borrowing agreement

Party A: (Possessing party, hereinafter referred to as

Party A: (Owner, hereinafter referred to as Party A)

Party B: (Borrower, hereinafter referred to as Party B)

Article 1: The model of the borrowed item (or software) and its accessories

Party A agrees to lend (model: ) and its accessories to Party B for use (the accessories include other related accessories).

Article 2: Borrowing period and use

1, the borrowing period from the signing of this agreement, for a period of three months. If Party B wants to renew the loan at the end of the period, it should submit a written application to Party A within three days before the expiration of the loan period, and can be renewed only after Party A agrees to renew the loan, and re-sign the loan agreement.

2, after the expiration of the loan period, if Party A does not agree to extend the loan, Party B shall unconditionally return the borrowed complete to Party A.

3, the loan period shall be renewed within three days before the expiration of the loan period.

3. If Party B leaves Party A due to work transfer or retirement, Party B shall return all borrowed materials to Party A before transferring or leaving Party A.

4.

4. Party B promises to Party A that the items will be used only for the needs of Party A's work and will not be used for other purposes.

Article 3: Responsibilities and Obligations

1. Party B has the responsibility and obligation to take care of, maintain, reasonably use, and properly keep the borrowed items.

2. If Party B loses the borrowed items during the borrowing period, Party B should compensate for the original price of the borrowed items at the time of purchase.

3, Party B borrowed can not be arbitrarily lent to others to use or other items not related to Party A's project.

4, before the return of the borrowed products or the signing of the corresponding sales / order contract, the ownership of the borrowed products still belongs to us. Without Party A's written approval, Party B shall not sell or lend the borrowed products to a third party.

5. During the loan period, Party B is responsible for the safety and integrity of the borrowed products and the serial number (S/N) labels shall not be worn, lost or modified. The return of the product must be tested by us:

If there is any damage to the loaned equipment, including machine damage, parts damage or loss, you must compensate us for the price of the loaned equipment. The compensation will be deducted from the salary as a priority;

Article 4: Extension and other

1, if the loan period, Party B needs to buy the borrowed products, Party A and Party B will sign a separate contract on the sale of the products; if the loan period, Party B needs to extend the loan period, you must go through the formalities with Party A for the extension of the period of the borrowed equipment.

2, if Party B does not return the borrowed products or not for the extension of the borrowing procedures, within one year is regarded as Party B paid to rent Party A products, the rent of 1000 yuan / month (after tax). Beyond one year, it is regarded as Party B agreed to buy the borrowed products, the purchase price according to the price of Party A to buy the product to pay, at the same time, Party B to pay the rent of the rental period.

Article 5: Troubleshooting

1, Party B borrowed If there is a failure or damage, it should be reported to the office in time for repair. Party B shall not dismantle the machine without authorization or go out to repair it by itself, otherwise it will be responsible for itself.

2, the maintenance costs incurred during the period of borrowing or renting by Party B, outside the warranty coverage of the maintenance costs borne by Party B.

Article 6 - Maintenance and repair of equipment and equipment

Article VI: the agreement in duplicate, by the A, B party each one. This agreement shall take effect from the date of signature and seal

Party A: Party B:

(seal) (signature)

Year Month Day Year Month Day