Common faults and repair methods of ozone machine include leakage, total flow abnormality, flavor abnormality, unstable concentration, high voltage abnormality, as follows:
1, leakage occurs: if ozone machine leakage occurs, you need to cut off the power supply firstly, and check whether the plug and wire are intact. If the plug or cord is damaged, it needs to be replaced with a new one. At the same time, check whether the wire connection inside the ozone machine is loose, if it is loose, it needs to be re-inserted tightly.
2, the total flow of abnormal: If the total flow of the ozone machine is abnormal, it may be because the air inlet is blocked or the filter is blocked. First clean or replace the air inlet filter, if the problem still exists, you need to check whether the pipe is clogged and unclogging or replacement.
3, the gas flavor abnormal: If the ozone machine produces odor, may be due to ozone generation board or water-cooled ozone generator pollution. At this time you need to clean and disinfect, you can use vinegar or special cleaners to clean.
4, the ozone concentration is not stable: If the ozone machine produces unstable ozone concentration, may be due to the ozone generator power adjustment is not correct. Need to use the instructions for the correct power adjustment, or adjust the ozone production settings.
5, high-voltage indication is abnormal: when the ozone machine's high-voltage indication is abnormal, it may be because the ozone generator internal discharge generated too large. In this case, you need to check whether the discharger is damaged, if damaged, you need to replace the new discharger.
Precautions for using the ozone machine
1, safety check: Before you start using the ozone machine, be sure to perform a safety check on the equipment. Check whether the plug and cord are intact and make sure they are firmly fixed to avoid the risk of leakage or short circuit.
2. Ventilation: Ozone is harmful to human body in high concentration, so you must ensure a well-ventilated environment when using the ozone machine. Open windows or use ventilation equipment to ensure that indoor air can be quickly diluted and circulated.
3. Protective measures: When operating the ozone machine, wear personal protective equipment such as protective gloves, glasses and masks to prevent possible spattering or breathing in high concentrations of ozone.
4, time control: according to the specific needs and equipment requirements, reasonable control of the operating time of the ozone machine. Prolonged and continuous use of the ozone machine may lead to high concentrations of ozone in the air.
5, good use of the environment: to ensure that the environment around the ozone machine is clean and tidy, and to avoid combustible or flammable gases near the equipment. At the same time, avoid splashing water or other liquids inside the ozone machine to prevent malfunction or damage.