National special operations license application brief
Special operations refers to the accident-prone, the operator himself, the safety and health of others and the safety of equipment and facilities may cause significant harm to the operation.
Special operators must be appropriate to the type of work, specialized safety training, by the safety and technical theory assessment and practical skills assessment, and obtain a special operations license, before they can work.
Special operation license, by the State Administration of Work Safety unified production, the provincial work safety supervision and management departments, coal mine safety supervision agencies are responsible for the issuance. Special operation license in the national common. Special operation license shall not be forged, altered, loaned or transferred.
Special Operators Safety Technical Training and Assessment Management Regulations" has been April 26, 2010, the State Administration of Work Safety Directorate General Office meeting, since July 1, 2010 shall come into force. Article 40 of the document provides: "production and management units using special operators who have not obtained a special operating permit for special operations, ordered to make corrections; overdue correction ordered to suspend production and rectification, and impose a fine of 20,000 yuan".
A special operation categories and permitted to operate the project:
(A) electrician operations: refers to the operation of electrical equipment, maintenance, installation, overhaul, transformation, construction, commissioning and other operations (excluding power system into the network operation).
1, high-voltage electrical work: refers to 1 kilovolt (kV) and above, high-voltage electrical equipment for operation, maintenance, installation, overhaul, renovation, construction, commissioning, testing and insulating work, equipment for testing operations.
2, low-voltage electrical work: refers to 1 kilovolt (kV) below the low-voltage electrical equipment for installation, commissioning, operation, maintenance, overhaul, renovation, construction and testing operations.
3, explosion-proof electrical work: refers to a variety of explosion-proof electrical equipment installation, overhaul, maintenance operations. Applicable to explosion-proof electrical work in addition to underground coal mines.
(B) welding and thermal cutting operations: refers to the use of welding or thermal cutting methods of material processing operations (excluding the "Special Equipment Safety Supervision Regulations," the relevant operations).
1, fusion welding and thermal cutting operations: refers to the use of local heating methods will be connected to the metal or other materials heated to a molten state and complete the welding and cutting operations. Applicable to gas welding and gas cutting, welding rod arc welding and carbon arc gas planing, submerged arc welding, gas shielded welding, plasma arc welding, electroslag welding, electron beam welding, laser welding, oxyfuel cutting, laser cutting, plasma cutting and other operations.
2, pressure welding operations: refers to the use of welding to apply a certain pressure to complete the welding operation. Apply to resistance welding, pneumatic welding, explosive welding, friction welding, cold pressure welding, ultrasonic welding, forging and other operations.
3, brazing operations: refers to the use of materials than the melting point of the base material for the brazing material, the weldment and brazing material heated to a temperature higher than the melting point of the brazing material, but lower than the melting point of the base material, the use of liquid brazing material to wet the base material, fill the joints gap and diffusion with the base material to achieve the connection of the weldment operations. It is applicable to flame brazing, resistance brazing, induction brazing, dip brazing and furnace brazing, excluding soldering iron brazing.
(C) work at height: refers to specialized or often in the fall height of 2 meters and above the base surface of the height of the potential fall of the high place of work.
1, elevated erection work: refers to engage in scaffolding at high places, across the frame erection or dismantling operations.
2, installation, maintenance and demolition work at height: refers to the installation, maintenance and demolition work at height. Applicable to the use of special equipment for building decoration, cleaning, renovation, electricity, telecommunications and other line erection, high pipeline erection, small air conditioning installation, maintenance, various equipment and facilities and outdoor advertising facilities installation, overhaul, maintenance, as well as engaged in the demolition of buildings, equipment and facilities at a high level of operation.
(d) refrigeration and air-conditioning operations: refers to the operation of large and medium-sized refrigeration and air-conditioning equipment operation, installation and repair operations.
1, refrigeration and air-conditioning equipment operation: refers to all types of production and business enterprises and institutions such as large and medium-sized refrigeration and air-conditioning equipment operation. Applicable to chemical production enterprises, machinery production enterprises, food production enterprises, agricultural and sideline product processing enterprises, warehousing production and operation of enterprises, transportation (refrigerated transport) business enterprises, service business enterprises and institutions such as large and medium-sized refrigeration and air conditioning equipment running operations.
2, refrigeration and air-conditioning equipment installation and repair operations: refers to 4.1 refers to the refrigeration and air-conditioning equipment, components and related systems for installation, commissioning and maintenance operations.
Two, registration requirements:
(a) 18 years of age, and not more than the state's legal retirement age;
(b) by the community or county-level or above, the health of medical examination, and does not interfere with the corresponding special operations of organic heart disease, epilepsy, Meniere's disease, vertigo, dysthymia, hysteria, tremor paralysis, mental illness, dementia, and other diseases And physiological defects;
(C) with junior high school and above;
(D) have the necessary technical knowledge and skills of safety;
(E) the corresponding special operations of other conditions.
Three, the issuing unit and query site:
After the training and assessment, the State Administration of Work Safety issued by the corresponding operating license, in the official website of the Safety Supervision Bureau query, the certificate is reviewed every three years, six years, a replacement, can be reviewed throughout the country, the replacement of certificates, the national universal.