HTCVR has 2 types of VR glasses,PC-side VR is HTCVIVE and HTCVIVEPRO
VR all-in-one machine has htcvivefocus I think as far as the pc side is concerned, now or more commercial use are using htcvive, after all, immersive or good.
htc is currently the highest end vr requirements of the computer configuration is also very high, of course, is currently vr glasses experience the best, clear experience immersive. Ordinary vr is two ordinary lenses. Secondly, there is also an all-in-one machine is acceptable to most people with its own operating system experience can also be. vr products are categorized into three kinds of computer all-in-one machine as well as a cell phone box. Currently on the market VR glasses can be divided into two main categories: PCVR and mobile VR.
(1) PCVR is characterized by: the need to connect to a PC or host to use tends to be relatively strong computational performance, the display effect is good, and can be space walking. (One exception is PSVR, which is connected to a PS console and has more playable resources.)
The representative products of PCVR are HTCVive and OculusRift with three cameras, you can walk in the virtual world after you bring it on, but there is a certain range limitation (e.g.: HTCVive probably needs a 20_ field).
(2) mobile VR (also divided into cell phone box and all-in-one)
Mobile phone box representative products are Samsung GearVR and Google Cardboard, the principle is to get a lens on the phone so that you can see the VR. the benefit of the convenience of having a cell phone can be seen; but due to the small size of the cell phone, and the VR of the large amount of arithmetic, so the heat is serious, and use with the card.
And the all-in-one machine is frankly a cell phone, only the core components of this cell phone are integrated inside the VR glasses. Because of the large size, the heat dissipation is better, the performance is a little more stable, but the effect is similar to using a phone box on a flagship phone.
(3) NOLO
This one can be interpreted as a combination of PCVR and mobile VR. NOLO consists of a positioning receiver, a handle, and a detector, which, when mounted on top of the phone box, will also allow you to realize the ability to walk in virtual space.
PC VR is also: HTCvive, Oculus these two better
And the other belongs to the all-in-one machine or cell phone + VR equipment, if you can personally think or HTCvive equipment in all aspects of the more prominent
vr all-in-one machine which brand is good
Better vr All-in-one machine brands are as follows:
1, HTCVIVEProEye
HTCViveProEye is a focus on quality VR equipment, through eye tracking to obtain real-time user feedback in real time, capture data for analysis and insight into user behavior and players and non-player characters (npc) natural interaction.
In addition to eye-tracking tech technology, the glasses are equipped with dual oled displays with a resolution of 2880x1600 pixels and a 110-degree both field of view (FOV), as well as SteamVR 2.0 tracking compatibility through HTC's improved design, which allows for a sit-down experience to be applied to a wide range of environments with multiple users.
2. HTCVIVEFlow
HTCVIVEFlow is a product with a very distinctive design. As a new concept VR device, VIVEFlow has a very obvious difference from traditional VR headsets: there are two 6DoF-enabled positioning cameras on the left and right sides under the Flow front panel.
They not only support the user to walk freely in the virtual environment while wearing the glasses, but also can switch the display to see the environment around them directly, making it convenient for the user to display the content when using it outdoors as well as switching to the camera to observe the outdoor environment.
3, PicoNeo3
PicoNeo3 adopts the battery rear program, the advantage of doing so is to be able to save space for the headset part, and can also share the weight of the front headset, to enhance the overall wearing comfort. At the same time, the left and right sides of the headband part, will not cause pressure on the head, it is in contact with the skin part of the use of leather and skin-like materials, to ensure that wearing comfort.
The PicoNeo3 has several buttons and ports distributed on the top, sides, and bottom. On the top of the body is its power switch and charging and data ports. The PicoNeo3 is equipped with a USB Type-C port and comes with two connecting cables and a fast-charging-enabled charger that can be fully charged in a shorter period of time. The Snapdragon XR2 SOC is also the top processor in the VR all-in-one market, and the addition of ultra 4K resolution and 90Hz high refresh is now the standard for VR all-in-one, so the QIYU 3 is also quite capable of performance alone.
5, Huawei VRGlass
Huawei VR Glasses adopts a split design, the body unloaded the battery and processor, the weight is also greatly reduced, weighing only 166 g. In addition, Huawei VR Glass has 700 degrees of refractive error adjustment, and supports independent adjustment of eyes. At the same time, it can automatically adapt to different people's pupil distance in the range of 55-71mm.
htcfocusplus connect computer steamvr
1.htc vr device connect computer
This is very simple, as long as you go to the HTCvive content platform viveport and steam download down can be, connect the device to the computer, and then open the game, there will be instructions, according to the above process can experience the game. The above process will be able to experience the game, I hope you have a good time!
2. htcvr how to connect the phone
First, you need a VR device (choose your favorite) Second, if it is a VR + cell phone, then the phone configuration should be good; if it is the PC side of the device, then you need to be a little bit of the computer configuration Third, if it is a VR + cell phone, you need to install the game on the phone; if it is the PC side of the device, you need to connect to the computer to download the game Fourth, if it is a VR + cell phone, you need to install the game on the phone; if it is the PC side of the device, you need to connect the PC to download the game Fourth, if it is VR + cell phone, will open the game of the phone into the VR glasses case, and bring it on, to play the game; if it is the PC side of the device, then download it, you can directly play the game And now on the market is the PC side of the device is better, take the HTCVive device, in addition to the daily play games, watch videos, but also can be used in the Education, automotive, real estate and other industries, this is also the future development trend. So, in VR this industry VIVE is the leader of China's PCVR market, so HTCvive is considered a better device
3. htcvr connection
Depends on whether it's the cell phone VR glasses or the PC side of the VR glasses, the cell phone side of the VR glasses in the cell phone to download the Storm Magic Mirror, the PC side of the VR glasses in the computer to download a software called steam software, but the PC side of the VR games need to pay.
Mobile phone download method:
1, Android or IOS cell phone to download VR Storm Magic Mirror APP software;
2, open the Storm Magic Mirror need to first set up the equipment, including VR products, cell phone gyroscope (you need to put the phone on a flat surface, click calibration can be), open the bluetooth handle remote control;
3, long press the remote control Long press the power on the remote control for 3 seconds, when the indicator light flashes, it means that the power on is complete;
4, turn on the Bluetooth on your cell phone, search for the Bluetooth device named "Mojing", click on pairing to enter the password "0000", choose to use the standard keyboard, and then click OK;
5, click on "Bluetooth", and then click on the "Bluetooth" button. Click OK;
5, after the connection is complete, run the Storm Magic Mirror app can be used;
6, after entering the click on the "channel" - "games", select your favorite type of choice "download" button can be;
7, after entering the "channel" - "games", select "download" button. "
7, download and enter the game can be played, the specific mode of operation according to each game is not the same and different.
VR glasses that VR headset, virtual reality head-mounted display device, is the use of head-mounted display device will be human to the outside world of the visual, auditory closure, to guide the user to produce a feeling of being in a virtual environment. The display principle is that the left and right eye screens display images of the left and right eyes respectively, and the human eye acquires this information with differences to produce a three-dimensional sense in the mind.
4. htcvr how to connect to the computer
1, menu button; 2, touchpad; 3, system buttons; 4, status indicator; 5, Micro-USB port; 6, tracking sensor; 7, trigger; 8, handle button
Open or close the handle method:
1, open the handle: directly press the handle button can be If you hear a "beep", it means that you have successfully turned on the HTCVive controller;
2. Turn off the controller: Press and hold the system button directly, and if you hear a "beep", it means that you have successfully turned off the controller.
Note, if you directly close the SteamVR or a period of time has been using the handle, will lead to the handle automatically shut down.
htcvive handle matching
Grip indicator light meaning:
Green: indicates that the HTCVive handle is currently in a normal state, and can be used normally;
Blue: indicates that the control handle has been successfully paired with the headset;
Orange: indicates that the handle is charging, and when the handle turns green, it means that charging is
Blinking red: the handle is low on battery and will soon run out of power;
Blinking blue: the handle is being paired with the headset;
Handle tracking status query method:
1, open the SteamVR app on your computer;
2, then hover the cursor over the icon of the handle that is not tracked. After that, click on the handle can be recognized;
3, if the handle quickly flashing white, it means that the handle has been successfully recognized.
Handle sensitivity adjustment method:
Open the Steam app on your computer, then click on the "handle" icon, then click on the "Calibrate Control Handle", so that you can complete the calibration process.
With the headset connected to the HTCVive controller, go back to your computer and open the SteamVR app. When the SteamVR app detects the controller, follow the on-screen instructions to complete the firmware update.
5. htcvr can be connected to the phone
Not really, VR virtual reality devices are divided into three kinds: VR external helmet, VR all-in-one machine, VR box glasses, the first two do not need a cell phone.
The first type: external VR helmet, representative products are: OculusRiftCV1, HTCVive, and Sony PSVR.
This is the kind of high-level configuration that we are talking about, summed up is: high configuration, good experience, strong performance. Playing heavy games with this is certainly right, but the price is too high, in addition to the cost of the helmet itself, the requirements of the adapted computer is also very high, at least tens of thousands of dollars in class, the general partners I'm afraid they can not accept it. The current price: more than 5000, excluding computer configuration requirements.
The second type: VR headset all-in-one, representative products: PicoNeoVR all-in-one, Dapeng M2
VR all-in-one is actually a simplified version of the VR helmet, his advantage is better than the box experience, and cheaper than the helmet, between the helmet and the phone box. This is a pity that VR products, because it has enough space for development, but suffers from too little content area as well as no subversive products, the current price: 2000-4000
The third kind: VR box, the representative of the products are: samsung GearVR, blue VR master, storm magic mirror and so on.
Dang, this is currently the most discussed type of VR equipment, this type of VR products is the use of VR equipment and cell phones together, there is no doubt that its convenience, simple operation and cheap price, is the most acceptable form of us consumers.
Current price: tens of dollars to hundreds of dollars are available.
6. htcvr connect to computer
htcvive's handle to match the meaning of the handle indicator light: green: that the HTCVive handle is currently in normal condition, can be used normally; blue: that the control handle has been successfully paired with the headset; orange: that the handle is charging, when the handle becomes green, that the charging is complete; blinking red: handle Low battery, about to run out of power; flashing blue: indicates that the handle is being paired with the headset; handle tracking status query method:
1, the line to open the computer's SteamVR application;
2, and then hover the cursor over the untracked handle icon, and then click on the handle can be recognized;
3, if the handle If the handle flashes white quickly, it means the handle has been successfully recognized. The handle sensitivity adjustment method: open the Steam application on the computer, and then click on the "handle" icon, and then click on the "calibration control handle" can be, so you can complete the calibration process. Once the headset is connected to the HTCVive controller, go back to your computer and open the SteamVR app, when the SteamVR app detects the controller, follow the on-screen instructions to complete the firmware update. If you do the above and it still doesn't work, if your headset has malfunctioned and the red light on the side of the headset has been flashing while the PC can't detect it successfully. Then an emergency recovery reboot will be able to bring your machine back to life. First, quit and close SteamVR, and then unplug the power cord connected to the headset. Next, press the button on the left side of the headset while connecting the cord back to the power bank, and hold it down for another 15 seconds. Once you let go, the Vive will reboot without any problems. At that point, update the firmware again and you'll have your Vive good as new.
7. htc's vr glasses computer configurations
HTCVive recommended PC configurations announced, see if your computer fits. Earlier, VRSAT had reported HTC's interview stating that the Vive doesn't need a top-end high-end PC to run.
HTC has also announced the recommended PC configurations to support the headset, which are as follows:
●NvidiaGTX970/AMD290 class or higher●Intel i5-4590/AMDFX8350equivalent or higher●4GB or more of RAM●HDMI1.3/ DisplayPort1.2 or newer ● 1 USB2.0 port or higher ● Windows7SP1 or newer As you can see from the list, the recommended PC configuration for the HTCVive falls into the mid-range tier, which also answers HTC's statement about recommended PCs.
In the configurations, there are more AMDFX8350 options than the OculusRift in terms of CPU options, and only half the RAM needed for the OculusRift. In the recommended configuration of the most expensive and most important is the graphics card, the price of more than 2000 (you know, high-end graphics card NVIDIAGTX980 is twice the price of 970). Rough calculation, to assemble a suitable HTCVive use of the computer, the price of about 5K (not counting the case of the monitor)
8. HTCvr equipment
HTCViveProEye is a focus on quality VR equipment, eye tracking to obtain real-time feedback from real-time users, to capture the data to analyze and gain insight into user behavior and natural interactions with players and non-player characters (npc).
In addition to eye-tracking technology, the glasses are equipped with dual oled displays with a resolution of 2880x1600 pixels, a 110-degree field of view (FOV), and SteamVR 2.0 tracking compatibility through HTC's improved design, making them suitable for sit-down experiences in a variety of environments with multiple users.
ViveProEye automatically adjusts the pupil distance by recognizing it for a great immersive visual experience. Utilizing SteamVR 2.0 tracking technology, ViveProEye allows users to achieve a spatial positioning of up to 10m*10m in a large space.
David_Weinstein, NVIDIA's head of VR, has said, "Vive is one of the best VR headsets available for professional users." With NVIDIA's VRS technology, users can get a supercharged experience from rendering and supersampling, resulting in high-quality graphics displays while improving computational efficiency.
9. htcvive need to connect to the computer
Step one
First of all, the space problem, players need to be prepared to have at least 2m x 1.5m active space, this area can only satisfy the most basic standing game, if you have the conditions it is recommended to be able to set up a larger space in order to better experience the HTCVive.
Step 2
After preparing the gaming space, we can start installing the accessories, players unpack the device to organize all the devices that need to be installed, first of all, let's find out what devices and accessories are in the whole box of HTCVive.
A is the base station x2 (fires a laser to locate the headset and controllers)
B is the sync cable (the base station can sync wirelessly, but if you want to use a wired one, it's this one, and it's very long)
C is the base station power adapter x2 (any electronic device needs energy to support it)
D is the mounting toolkit (this is a bit more sweet)
E is the connector (it's all you need to connect the head unit to the computer)
F is the connector patch (you can stick the connector to the main case or something to hold it in place)
G is the connector power adapter (same as C)
H is the HDMI cable (connector to PC 1)
I is the USB cable (connector to PC 2)
< p>J is the headset (reportedly works pretty well)K is the cotton pads (already on the headset, you don't need to install them yourself, this one is a spare)
L is the wipe
M is the manual
N is the headset
O is the controller x2
P is the MicroUSB charger x2 (for charging the controller) which The most important components are A base station, N head unit, and O controller.
By the introduction above I believe you have an understanding of the accessories, the next thing we need to install and connect is the locator, the streaming box and the helmet.
Step 3
The first step is to install the locator, often called the base station, which has a visual range of 120°, so the player needs to set up the two base stations diagonally on opposite sides of the high ground so that the base stations can scan the game space and there is no blockage between them.
The rear ports of the base stations only need to be connected to a power source when in use, and the rest of the ports are only connected for updates or synchronization problems.
After the installation is completed, connect the power supply, see the indicator light green light means that the base station has been working normally, if the indicator light flashes, it means that there is a displacement phenomenon needs to be readjusted the position of the base station.
Step 4
The next step is the connection of the streaming box, which is actually very simple. You just need to plug the included USB cable, HDMI cable and power cable into the corresponding ports on the streaming box, and connect the other end to the corresponding ports on the computer host.
Finally, there are three orange ports on the other end of the streaming box that are used to connect the 3-in-1 cable to the headset, so you can connect the cable to the corresponding ports and the computer will start installing the driver automatically.
Step 5
HTC's grips are configured wirelessly, so after installing the system, press the button at the bottom of the grips to hear a beep and feel a vibration, then you'll be able to turn on the grips, and the light at the top will be on to indicate that the grips are running.
The entire installation is now complete, and this tutorial is much easier to understand than the more complicated instructions, and we've prepared a video of the installation tutorial for your reference.
After the installation is complete, we'll move on to the next step of installing and setting up the software on your computer.
First we need to go to the HTC website to download a Vive program to install, which includes the VivePort App Store PC client, Vive virtual reality home page and SteamVR.
After the download is complete, we will first introduce the Viveport registration process.
The first time we open the Vive will pop up the login page, we choose the bottom of the registration, of course, players can also choose QQ or Weibo login.
The second step is to fill in the relevant information, such as email and password, and then click on "Create Account"
The third step is to create an account, and then the interface will pop up to verify the email address, and then we need to go to the registered email address to verify the information.
The fourth step is to open the email you received in your registered email address and click "Verify My Email"
The last page that appears indicates that the account has been registered, and you can log in to the software to purchase the game.
Step 5: Once you've logged in, you'll be taken to the VIVE homepage, where you'll need to select your country of residence, so just check the OK box.
The sixth step is to enter the VIVE game interface, which has a variety of paid and free games for players to experience.
Select a game and click enter
Select the green logo with the amount of money in the upper right corner
The purchase screen will pop up and click continue
Select the payment method and then enter your account password to purchase the game, and then proceed to download the game, and then the player will be able to start experiencing the game.
This is HTC's own store registration and purchase strategy, in addition to its support for steam game content, the following we will continue to introduce steamVR setup strategy.
The first step is to open the installed steamVR, run it and the setup screen will appear, make sure you select the size of the space you are in.
The second step is to place the controller and headset in a location visible to the locator for recognition.
Step 3 Stand right in the middle of the space, point the controller at the computer monitor and hold the trigger to check the device.
Step 4Place both controllers on the floor in the space, making sure they are within the visible range of the localizer, and then perform a ground calibration.
Step 5Draw a range map of the space with the joysticks in your planned game space, making sure there are no obstructions above or below the drawn area.
Finally, click "Next" when you're done with the setup, and you're ready to get started with steamVR.
SteamVR games need to be purchased from the store, so you'll need to sign up for a steam account. We can register in the software or go to the official website, here we briefly talk about how to register on the official website.
Enter the official website and click on login in the upper right corner
Select "Join Steam" in the middle of the login page
Then, fill in the relevant information in the account creation, and then verify the email address to complete the operation, and then the player can go to the steam store to select the game and purchase. The game will then be available for purchase on the Steam Store.
We've also prepared a video tutorial on how to set up steamVR, so that you can quickly and intuitively understand the setup process.
After all the preparations are done, players can go to the steam store to buy and download the games they want to play, and enjoy a magical and exciting VR journey in HTCVive.
10.htcvr device installation tutorial
First, you need a VR device (choose your favorite)
Second, if it is VR + cell phone, then the phone configuration of the phone to be good; if it is the PC side of the device, then you need to be a little bit of the computer configuration Third, if it is a VR + cell phone, you need to install the game on the phone; if it is the PC side of the device, you need to connect the computer to download the game. If it is a PC device, you need to connect the computer to download the game Fourth, if it is a VR + cell phone, will open the game of the phone into the VR glasses case, and bring it on, to play the game; if it is a PC device, then download a good, you can directly play the game And now on the market is the better equipment is the PC side of the equipment, take the HTCVive device, in addition to the daily playing games, watching videos, but also can be used in the education, education and training, and also can be used in the education, education and training, and also can be used in the education, education and training. In addition, it can also be used in education, automotive, real estate and other industries, and this is also the future development trend. So, in the industry of VR VIVE is the leader of China's PCVR market, so HTCvive is considered to be a better device
Which is the best VR device for watching movies
From the perspective of movie watching, we have selected three highly distinctive VR devices from a variety of brands today. The pinnacle of Aqiyi - Aqiyi iQUT Future Cinema, the more comprehensive HTCVIVEFOCUSVR All-in-One, and the Xiaomi VR All-in-One that stands out for its cost-effectiveness.
Aqiyi iQUT Future Cinema adopts a calm frosted black composite material as its body shell, with "iQUT" and "iQIYI" logos printed on the front and left side respectively.
All buttons and interfaces are centered on the top of the headset, including the USB port. All the buttons and ports are centered on the top of the head unit, including USB Type-C, 3.5mm headphone jack, covered microSD card slot, power button, confirmation button, and back button, and there are three cooling ports on the top and bottom edges, with built-in ultra-thin and silent cooling fans. The mouse handle has a teardrop shape and features its own unique button design that adds an auxiliary button and a left volume button compared to traditional buttons.
HTCVIVEFOCUSVR All-in-One*** comes in two color schemes, and I chose the electric eye blue. The body is made of lightweight polymer, with two front-facing cameras in front of it, the "VIVE" logo printed in between, and a heat sink on top.
The headset has a USB Type-C port, a power button and a special port for PCs on the top, a button for adjusting the pupil distance and a microSD card slot on the bottom, and a 3.5mm headphone jack and volume button on the side. Empty mouse handle shape is relatively flat, by the touch disk, back button, Home button, trigger composed of traditional button design, and in the right side of the extra volume keys.
Millet VR all-in-one machine to white frosted plastic, front aluminum alloy front cover printed with "MI" LOGO. headset left on the left side of the old MicroUSB interface and 3.5mm headset interface, the upper edge of the power button and volume keys. The empty mouse handle is rounded and full of shape, and also adopts the traditional button design, but there is no volume button.