The first step: this is a double-rocking bed of two rocking handle, rocking handle is in the hanging state of the retracted, at this time the bed of the bed back board and leg board are in a parallel state. If the patient wants to sit up, the nursing staff hold the black handle upward, the rocker is in working condition.
The second step: lift the rocker, with the spring sleeve into the working position to the inside of the indentation, only to hear the "click" sound, the rocker is in the working state, the two rocker parallel state is the working state, the left side is the control of the leg board lifting and lowering, the right is the control of the back board lifting and lowering.
The third step: in the working state of the rocker, clockwise shaking the right side of the rocker, is to raise the backboard, the patient can sit up against the backboard. Generally speaking, the medical double crank bed, are the right side to raise the backboard, the left side to raise the leg board.
The fourth step: rocking the backboard should be slowly rocking, to avoid violent rocking to bring discomfort to the patient. Because the clinical caregiver shaking the bed are load shaking, shaking may have heavy some. The limit angle of the backboard swinging up is 65 degrees, so generally speaking, it is enough to swing to about 60 degrees. This is the state of the backboard up
Step 5: the leg board rocker is on the left side, clockwise slowly rocking the leg board will be slowly raised. The patient can put the leg on the leg board. When shaking the leg board, it should be noted that the leg board shaking limit angle is 30 degrees, so in the care of the patient, shaking the leg board to achieve the clinical needs can be.
Sixth step: if the patient needs to leg cocking, or to check the diagnosis and treatment, you need to swing the leg board up, this is the leg board swing up state.
Seventh step: if the examination or treatment is completed, the patient needs to rest in bed, then first hold the left side of the rocker counterclockwise rocking, the leg board will be put down, when the leg board with the bed frame parallel to stop rocking, and then hold the right side of the rocker counterclockwise rocking, the back board will be put down, when the back board and the bed frame parallel to stop rocking.
Step 8: Since the handle occupies space when it is in working condition, when the patient is resting, the nursing staff can release the handle in working condition to reduce the occupied space, so as to facilitate the medical staff to enter and exit the ward.
Step 9: It is very simple to release the handle, first pinch the handle spring sleeve and pull it outward, when the spring sleeve is detached from the pivot pin, the handle will hang down automatically.