dmgmori is Germany Demagi and Japan Mori Seiki company integration, Germany manufacturing (DMG 143 years) + Japanese manufacturing (MORI SEIKI 65 years) strong combination of the formation of a new global leader in CNC machine tools - Demagi Mori Seiki (DMG MORI).
dmgmori's predecessors were three of Germany's largest machine tool producers: Dekker, Maho and Gitomer. Dekker is a well known brand of lathes, Maho is a very well known brand of milling machines, and Gitomer produces both lathes and milling machines as well as being a very good marketing company.
Gitelmay was founded in Germany in 1870 and has been listed on the Stock Exchange since 1949. In 1994, the company acquired DECKEL and MAHO AG. Since then, the "DMG" brand has become the most recognized name in the machine tool industry worldwide.
Expanded Information:
Conditions for the use of CNC machine tools:
1, environmental requirements, the location of the machine tool should be far from the vibration source, should be avoided to avoid direct sunlight and heat radiation, to avoid the impact of humidity and airflow. If there is a vibration source near the machine, the machine should be set up around the anti-vibration ditch. Otherwise, it will directly affect the machining accuracy and stability of the machine tool, will make the electronic components poor contact, failure, affecting the reliability of the machine tool.
2, power requirements, general CNC lathe installed in the machining shop, not only the ambient temperature varies greatly, the use of poor conditions, and a variety of electromechanical equipment, resulting in large fluctuations in the power grid. Therefore, the location of the installation of CNC lathes, the need for power supply voltage is strictly controlled.
3, temperature conditions, the ambient temperature of the CNC lathe is less than 30 degrees Celsius, the relative temperature is less than 80%. Generally speaking, CNC electronic control box is equipped with an exhaust fan or chiller inside to keep the electronic components, especially the central processing unit working temperature is constant or temperature difference is very small.
DeMajer official website-DeMajer corporate profile