kg316t time control switch setting method: unlock the panel - time, minutes, weeks - timing (switching time) - automatic - restoration, the specific operation steps are as follows:
1, first press the "cancel/restore" key to unlock the screen, as shown in the figure. The following are the steps you need to take to unlock the screen.
2. Press the "Time Calibration" button to calibrate the hours, the "Minute Calibration" button to calibrate the minutes, and the "Week Calibration" button to calibrate the weeks.
3. Press the "Timer" button again to set the switching time, as shown in the figure.
4. Press "Timing" again to set the second switching time, and so on. You can set it more than 10 times, but usually you only need to set it once.
5. Press the "Auto/Manual" button and turn it to "Auto", then the machine can be turned on and off at fixed times.
6. When the setup is complete, press the "Cancel/Resume" button to lock the screen and finish.
Precautions:
1. Do not use the timer switch on equipment that may cause personal injury or death or have a significant impact on society due to incorrect timer switching (such as medical equipment and large equipment).
2. For equipment (large heaters or cold storage, etc.). Major property damage due to timing switch errors, use timing switches to ensure that their characteristics and performance values have sufficient margins, and take safety measures such as double loops.
3. Do not repair, dismantle or remodel workers yourself. Please entrust the repair and inspection work to a dealer or turning unit.
4. Do not touch the terminals after connecting the power supply.