Xiaomi air purifier Jinan washing machine installation notes

1, after the washing machine received, unpacking, take out the machine base inside the fixed foam, be sure to take all the way through; machine back of the three transport screws must be removed; because the drum washing machine is the upper drainage, so the drain must be kept 60 centimeters ~ 90 centimeters high placement; before use, please be sure to make sure that the power outlet is grounded, otherwise there is a risk of electrocution; drum laundry is best placed on the balcony or other Not a bathroom place, so that its life and health is therefore greatly improved.

2, pay attention to the protection of the electrical part of the insulation and strictly according to the requirements of the grounding wire.

Where a two-pronged power plug must be used to the washing machine special ground wire and grounding body (angle, iron pipe) well connected, and reliably buried in the ground.

Don't connect the ground wire to the pipeline of tap water, heating, etc., because

The pipeline is complicated, and the contact resistance at the interface is large and unreliable.

If there is a three-hole socket on the wall, the upper hole in the center is the ground, designed for the need to ground

Equipment, should be connected reliably with the washing machine special ground wire.

3, the washing machine should be placed smoothly and firmly, so as not to produce shaking or vibration when the machine is working, damage to the life of the machine parts and increase the noise.

The uneven ground can be

adjusted by adjusting the bottom corner of the housing screws or plugs with a sturdy gasket.

The washing machine should be placed in a well-ventilated place and try to avoid direct sunlight, which is conducive to

Water distribution, reduce moisture and mold, to protect the electrical part of the insulating properties and metal parts less moisture corrosion, as well as to prevent the plastic shell fading, mildew spots

, deterioration and deformation.

4, put the washing machine as far as possible from the water supply, power, sewage pipes closer, so as not to power leads, up and down the pipe is too long to hinder the work, and wire

long time by the water-soaked outer skin insulation is easy to damage.

Machine to bring, drainpipe hanging position should be easy to do, the middle part of the hose do not twist and bend, and

faucet interface and washing machine inlet connection part of the firm insurance, not reluctant to connect, otherwise the water flow is large when the joints will be broken, waste of water and

spattered dirty clothes.

Clothes basin should be put in order, avoid pressure on the upper part of the housing, to the control panel part of the machine parts to bring damage.

Jinan washing machine