Special emergency rescue plan for electromechanical transportation accidents

According to the "People's Republic of China *** and the State Safety Production Law" and the requirements of the relevant safety production laws and regulations, combined with the company's actuality, by the managerial research, has formulated a "Spire Mining Limited Liability Company electromechanical transportation accidents special emergency rescue plan".

First, the purpose of the preparation of the plan and the scope of application

This "plan" applies to the Spire Mining Limited Liability Company in the event of electromechanical and transportation accidents, for the guidance of the accident rescue and disaster relief treatment and daily training and drills.

Second, the main basis for the preparation

The preparation of this "plan" is mainly based on the relevant laws, regulations and related technical standards are as follows:

(a) "The People's Republic of China *** and the State Production Safety Law"

(b) "The People's Republic of China *** and the State Mining Safety Law"

(d) Regulations on Safety Production License

(e) Measures for the Implementation of Safety Production License for Coal Mining Enterprises

(f) Provisions on the Safe Management of Major Dangerous Sources

(g) Measures for the Administration of Emergency Response Plans in Case of Production Safety Accidents

(h) Regulations on Reporting and Investigating and Handling of Production Safety Accidents

(i) Measures for the Administration of Emergency Response Plans in Case of Production Safety Accidents

(I) "Coal Mine Safety Regulations" (2005 version)

(J) "State Council on the comprehensive strengthening of emergency management work" (Guofa [2006] No. 24)

(XI) "Office of the State Council forwarded to the General Administration of Safety Supervision and other departments of the General Assembly on the strengthening of the views of emergency management work" ( State Council [2007] No. 13)

(xii) "General Office of the State Council on strengthening the opinions of grass-roots emergency response team construction" (State Council [2009] No. 59)

(xiii) "Opinions on Strengthening Emergency Response Management in Safety Production" (Safety Supervision and Administration of General Emergency Response [2006] No. 196)

(xiv) "production and management units of safety production (Chinese People's Republic of China*** and the national industry standard AQ/T9002-2006)

(xv) "Zaozhuang Mining (Group) Limited Liability Company Production Safety Accident Emergency Response Plan"

Third, the level of the plan

The plan for the enterprise level.

Fourth, the type of accident and the degree of harm analyzed

The main types of accidents are:

(a) mine mechanical and electrical accidents. That is, the mechanical and electrical equipment failure, easy to cause the whole mine power outage, wind, lifting transportation, drainage interruption or personal electric shock, mechanical injury, etc., endangering the production and personal safety, or cause significant economic losses.

(b) the mine main shaft lifting accident. That is, the main hoisting winch broken rope running car, easy to cause casualties, or cause significant economic losses.

(C) the mine main and auxiliary transportation accident. That is, the main transportation belt broken belt, battery car collision, rear-end, inclined shaft transportation running car and other major accidents, endangering the production and personal safety, or cause major economic losses.

V. Basic principles of emergency response

Based on the principle of "people-oriented, safety first", always put the protection of the lives and health of the masses of workers in the first place to the shortest possible time to restore the normal operation of the equipment, lifting the accident on the personal threat. The threat of the accident, effectively strengthen the safety of emergency rescue personnel to minimize the casualties and hazards caused by the accident.

Six, response classification

According to the severity of electromechanical transport accidents, controllability and difficulty of relief, the major electromechanical transport accident response level into Ⅰ, Ⅱ, Ⅲ.

Ⅰ level: mechanical and electrical accidents, main and auxiliary shaft lifting, main and auxiliary transportation accidents, resulting in casualties or production interruption for more than 12 hours, can not be restored in time.

Level Ⅱ: Mechanical and electrical accidents, main and auxiliary well elevation, main and auxiliary transportation accidents, resulting in casualties or production interruption for more than 6 hours, can not be timely restored.

Class Ⅲ: mechanical and electrical accidents, main and auxiliary shaft elevation, main and auxiliary transportation accidents, resulting in production interruption, which can be resumed within 6 hours.

VII, the accident rescue organization and its constituent units, constituents, division of responsibilities

In order to do a good job in the emergency rescue of electromechanical transport accidents, the company set up a special emergency rescue command for electromechanical transport accidents.

Commander-in-chief: General Manager

Deputy Commander-in-chief: Deputy Manager of Electrical and Mechanical, Deputy Manager and Chief Engineer

Members: other deputy general manager, deputy general manager and the main person in charge of the relevant units and departments

Responsibilities: First, responsible for the rescue team formation of this special emergency response plan, equipped with the relevant equipment and equipment. Secondly, it is responsible for the study, implementation, rehearsal and execution of this special emergency rescue plan. Third, after the occurrence of electromechanical transport accidents to analyze and decide whether to start the plan, start the plan, fully responsible for emergency rescue work, including personnel, resource allocation, mobilization of emergency response team. Fourth, the formation of on-site command, determine the command staff, rescue teams. Fifth, to command and dispatch the emergency rescue team and resource allocation, including rescue and relief, medical care, defense and rescue materials, aftercare, etc.; Sixth, to assess the extent of the development of the situation, and decide whether to start other relevant special plans. Seventh, according to the development of the situation, decide whether to request external assistance. Eight is to approve the termination of this plan.

The Emergency Rescue Command set up an office, the office is located in the Department of Production and Technology, by the Department of Production and Technology, vice minister of the Office of the Director of the Department of Production and Technology, the Department of Production and Technology, scheduling, electromechanical engineering, ventilation and prevention of engineering, supply section of the relevant personnel for the members of the Office of the Office of the specific responsibility for coordinating the work of each group to carry out emergency rescue and emergency relief work as well as the regular release of the emergency rescue of the relevant situation.

Responsibilities: Under the direct leadership of the Emergency Rescue Command, fully responsible for the organization and coordination of materials, equipment, logistics and other work, to complete the tasks assigned by the Emergency Rescue Command.

According to the needs of emergency rescue work, set up the scene, technology, supplies, information (publicity) and logistics and other five professional working groups.

(a) the scene of the working group: by the deputy manager of mechanical and electrical as a leader, members of the production of the deputy general manager, safety inspection and rescue team and other professional departments responsible for the composition. Responsible for the emergency mobilization of all personnel, materials and equipment, and strive to minimize the losses caused by the electromechanical transport accident.

(b) technical working group: by the deputy manager and chief engineer as head, members of the Safety Supervision Department, Production Technology Department, scheduling office, electromechanical work area, through the prevention of work area, supply section of the relevant personnel. It is responsible for analyzing the characteristics and nature of the accident, predicting the scope and trend, and formulating rescue programs and measures. And report in time according to the provisions of the rapid report system. At the same time, to participate in the accident to assist in the investigation and analysis.

(C) material supply group: the supply section chief as head, members of the supply section by the relevant personnel. Responsible for ensuring the supply of rescue materials, tools and equipment.

(4) information (publicity) working group: the director of the integrated office as a group leader, members of the production and technology department, electromechanical engineering district, through the prevention of industrial area, responsible for doing a good job of the threatened workers, the masses evacuation of the ideological work, publicity in the rescue and relief process of the advanced people and deeds.

(E) stability logistics working group: by the deputy manager in charge of logistics as a leader, members of the defense section, wages, finance, health room and other relevant personnel. Responsible for setting up the alert, rescue the injured, rescue and relief personnel life and accident after treatment.

Eight, prevention and early warning

(a) Hazardous source monitoring

1, mine power supply hazardous source monitoring and control and preventive measures

(1) the main monitoring and control measures

Microcomputer monitoring; electrical test; protection rectification.

(2) the main preventive measures

A, under normal circumstances, the mine power supply should be used to separate the mode of operation, one circuit operation when the other circuit must be charged backup, to ensure the continuity of power supply.

B, the underground shall not be electrified maintenance, relocation of electrical equipment, cables and wires.

C. Unauthorized operation of electrical equipment is not allowed for non-specialized or off-duty staff.

D. Explosion-proof electrical equipment must be complete, can be used in the well, prohibit the use of obsolete equipment.

E, seriously carry out the rainy season "three defense" inspection, rectification work, power supply lines regular inspection.

F, the well, down the electrical control equipment, power transformers, all kinds of protection must be complete and reliable.

G. Actively promote the use of integrated automation control equipment.

H, special operators must be licensed to work, on-site shift handover, and strengthen the equipment inspection tours.

I, high-voltage electrical equipment overhaul and adjustment work, the implementation of two tickets and construction measures.

J, the electrical equipment and cables according to the "Electrical Safety Regulations" to do a good job of electrical testing.

2, mine hoisting hazardous source monitoring and control and preventive measures.

(1), the main monitoring and control measures

A, put into operation in the lifting device must be inspected every six months, every year a test.

B. An overcoiling protection test should be carried out every shift, and the maintenance worker should carry out regular tests on the protection.

C. The hoisting wire rope must be inspected once a day.

D, the main hoisting winch must have backup protection.

E, the winch driver strictly implement the tour inspection system.

(2), the main preventive measures

A, the application of automated control equipment.

B. Adhere to the system of equipment repair, inspection and maintenance.

C, prohibit the use of obsolete equipment.

D. Coal mine equipment involved in safe production must have the coal safety mark.

E. Special operators must be licensed.

F, strictly according to the operating procedures and safety regulations and measures.

G, hoisting wire rope in operation by sudden stop and other violent tension, must immediately stop and check.

H, a variety of protection must be complete, sensitive, reliable, and regular test, make a record.

I, hoisting device to do regular inspection of the use of wire rope, inspection of the safety factor is less than the specified value must be replaced. The main hoisting device must have winch instructions, electrical system diagrams and other information specified in the "Mine Safety Regulations", and properly stored.

J. The main hoisting winch is equipped with a main and deputy driver, and is operated strictly in a formal manner and according to the rules.

K, the operator should master the emergency disposal measures.

3 、Main and auxiliary transportation hazardous source monitoring and control and preventive measures

(1), the main monitoring measures

A, the use of mine track transportation letter, set, closed system; the application of the main transport belt centralized monitoring system.

B. Conduct annual review of the used and spare battery cars every year.

C, the use of mine car connecting device to do a yearly tension test.

D. Tension test of the wire rope for inclined hoisting in accordance with the cycle and items stipulated in the "Coal Mine Safety Regulations".

E. The overhead traveling crane is tested in accordance with the cycles and items stipulated in the Coal Mine Safety Regulations.

F. Strengthen supervision and inspection.

(2), the main preventive measures

A, to strengthen the safety inspection of the battery car, battery car gate, lights, alarms, connecting devices and sand spreading device any one of which is not normal, shall not use the battery car. Battery car transportation, road signs and warning signs should be installed in the roadway; in the traffic, pedestrian crossing should be installed to use the language of the flat lane alarm device.

B, the driver must be licensed to work, according to the signal and scheduling instructions, driving before the signal must be issued, the locomotive running, it is strictly prohibited for the driver to head or body out of the car, the driver left the seat, you must cut off the power supply to the motor, the control handle removed, tighten the car brake, but do not turn off the lights.

C, the battery car the same track in the same direction, you must maintain a distance of at least 100m; prohibit traffic pedestrians, motorcycles in the line to traffic, pedestrian crossing, the driver to slow down.

D. It is strictly prohibited to pickpocket, jump battery car. Strictly prohibit the simultaneous transportation of explosive, flammable, corrosive substances or attached to the material car.

E, oblique transportation is strictly prohibited over the trailer, wire rope inspection and testing according to regulations, wire rope flattening, broken strands, broken wire over the limit and corrosion phenomenon should be replaced immediately; blocking device and running car protection device should be complete and reliable.

F. Installation and application of belt breakage protection device, online monitoring system, and normal use of coal stacking, anti-skid, anti-run-off, smoke, over-temperature and automatic sprinkler devices and other safety protection devices.

G, strengthen the overhead trolley motor loss of voltage, short circuit, phase break, overload action, drop rope off the slot, offside protection action, the trolley under-speed, over-speed protection action of the inspection and test, to be safe and reliable.

(2) Early warning action

1, on the possible cause of electromechanical transportation accidents to strengthen the scheduling, inspection of the source of danger.

2, on the omens that may lead to more serious electromechanical transport accidents, the basic units should immediately report to the dispatching room, the duty officer must immediately notify the supervisor, the main leader, according to the regulations, according to the leadership directive to take targeted measures program to eliminate the hidden dangers of accidents. During the rectification period must develop practical safety measures to prevent accidents.

Nine, accident reporting and disposal procedures

electromechanical transportation accident occurred, the site personnel should quickly report the disaster to the scheduling office, by the scheduling office according to the electromechanical transportation equipment and facilities of the 'degree of destruction, the severity and the scope of the possibility of spreading or expanding the possibility of accidents, to decide on the scene and the scope of the impact of the personnel within the safe Retreat route, retreat mode and method, retreat to a safe place to standby (standby place must have a contact phone number). And immediately notify the duty leader and the emergency rescue command, the commander-in-chief decided to start this special emergency rescue plan. At the same time, according to the provisions of the rapid reporting system in a timely manner (the contents of the report include: the accident occurred unit profile; the time and place of the accident, as well as the accident scene; the accident briefly; the accident has caused or may cause the number of casualties and a preliminary estimate of the direct economic loss; has been taken to the measures; the other should be reported to the situation, etc.).

(a) the plan after the start of the disposal procedures

1, according to the type and nature of the accident, the scope of the impact and severity, by the command to arrange for the person in charge of the relevant departments to carry out the compilation of the accident rescue and relief programs and prevent the expansion of the accident and the accident is likely to expand the emergency response, reported to the command for approval and then implemented.

2, in the process of rescue and relief in case of accidental changes in the need to modify the rescue and relief programs and measures, must be immediately reported to the command, the command decided to modify the program and processing measures.

3, the rescue team should first arrive at the scene to organize the investigation work, accurately explore the nature of the accident, the cause, the scope of the accident, the victims may be located, as well as the site of the ventilation of the gas situation, for the command to develop rescue and relief programs to provide a reliable basis.

4, the command to participate in the accident rescue and relief personnel must be unified command, and the implementation of rescue and relief personnel to enter the accident site cordon area registration, reporting system and access to the cordon area issued license system. Any person who enters or leaves the cordoned-off area must hold a pass issued by the command. The personnel standing guard in the disaster area must be strictly inventoried and carefully recorded. And the strict implementation of the site handover signature system, indicating the handover time, location and personnel access.

5, according to the actual situation at the scene of the accident and the possibility of expansion of the decision to cut off the regional power supply, and hang a blackout sign, strict implementation of the management system of stopping the power supply. Without the consent of the command shall not take the license to send electricity.

6, in the rescue and relief process, must ensure that the underground wind supply system is normal, reliable and stable, without the consent of the emergency rescue headquarters, shall not arbitrarily stop the wind or change the direction of wind flow. And the implementation of good power outages, wind evacuation measures.

7, arrange for professionals, in accordance with the relevant provisions, under the premise of good personal protection, according to the command of the arrangement of the monitoring and control of the location of the accident area of the gas changes, the concentration of poisonous and harmful gases, as well as related to the need to detect the relevant data and parameters of the monitoring and control on a regular basis, and in a timely manner, the collection of the situation information and measured data to provide to the command, in order to make timely decisions or adjust the rescue and relief headquarters. Make decisions or adjust the rescue and relief programs.

8, dealing with the accident, according to the rescue and relief needs, the relevant equipment, facilities, equipment, materials, etc. should be supplied in a timely manner, quickly in place, to ensure that the smooth progress of rescue and relief.

(2) rescue measures

1, power supply accident handling

(1), the mine a circuit power outage, immediately find the cause, disconnect the point of failure, put into another standby line, to restore power supply to the mine; in the whole mine power outage or ventilation system after the power outage, such as can not be instantly restoration, must immediately notify the underground affected locations, immediately stop working, cut off the power supply, staff first withdrawn to the air intake tunnel.

(2), the operation of stopping and sending power should be carried out in accordance with the instructions of the commanding officer, and unauthorized operation is not allowed.

(3), in the case of electrical equipment, cable fire, immediately cut off the power supply of electrical equipment, cable, and then use the appropriate fire extinguishing equipment to extinguish the fire.

(4), by the command to decide whether to start other related plans.

2, electrocution accident treatment

(1), quickly cut off the power supply, so that the electrocution of people out of the state of harm by the current.

(2), will be detached from the power supply after the electrocution of the person quickly moved to a better ventilated, drier place, so that it lies on its back, will be relaxed shirt and pants belt.

(3), the electrocuted person for cardiac resuscitation, artificial respiration and trauma bandage.

3, lifting broken rope and casualties

(1), mine rope breakage accidents, the rescue team to arrange for professionals with safety gear, special tools and communication tools to quickly arrive at the scene, and timely rescue of the injured on the scene and rescue of the well, and to protect the scene.

(2), deal with the scene and the surrounding insecurity, reinforce the roadway support, control the passing pedestrians and vehicles.

(3), rescue team personnel according to the scene situation to take measures to prevent the accident from expanding.

(4), after the scene rescue, the organization of the relevant departments of the accident scene investigation, analysis.

4, the main and auxiliary transportation accidents and mechanical casualties

(1), after the occurrence of the main and auxiliary transportation accidents or mechanical casualties, the site personnel should be timely on-site rescue of the injured and rescue on the well, and to protect the scene.

(2), deal with the scene and the surrounding unsafe factors, control the passing pedestrians.

(3), rescue team personnel according to the scene situation to take measures to prevent the accident from expanding.

(4), after the scene rescue, the organization of the relevant departments of the accident scene investigation, analysis.

Ten, the scene of self-rescue, mutual rescue and emergency evacuation, evacuation

(a) the scene of any person found in the electromechanical transportation accident, should first cut off the power supply, and quickly to the dispatch office report.

(ii) construction site staff to use the existing conditions to rescue the injured, the site conditions are not allowed, shall not take the risk of rescue, so as to avoid new casualties.

(c) District (team) leader, team (group) leader in the retreat order, should immediately count the construction team site staff, according to the command order and the prescribed route, evacuated to the designated location, retreat to the predetermined standby position or safe location, district (team) leader, team (group) leader should immediately recount the number of people in the team, cleaned up, and then reported to the dispatch office or the unit immediately! The first thing you need to do is to get a good look at the situation.

Xi, expand the emergency measures

When the occurrence of electromechanical transport accidents can not be controlled only by the mine's own rescue power, there is a possibility of causing greater casualties and property damage, we must contact the local government agencies and the corresponding rescue team to request support. At the same time to the group company information dispatch center report.

XII, the accident scene protection measures

In order to ensure that the accident investigation and evidence collection objectively and impartially, the accident scene should be protected.

(a) After the accident, all means should be taken on-site rescue, rescue the injured, and actively take measures to prevent the accident from expanding.

(b) In the rescue process, in order to rescue the injured must move the object, you must do a good job of site marking.

(C) as far as possible on the scene to collect physical evidence, and will be collected to indicate the location of the object, the time, the name of the object, the collector, the collection of objects should be kept intact, not allowed to wash, wipe, collect the object must be no less than two people.

(d) to take measures to protect the scene carefully, where the accident-related objects, traces, state, etc. are not destroyed.

Thirteen, the accident emergency rescue termination procedures

Emergency rescue command according to the accident emergency rescue rescue rescue situation, confirmed that the following conditions are met, the emergency rescue procedures can be terminated:

(a) the injured and victims of the transfer out of the scene of the accident, the victims of the aftermath of the appropriate treatment.

(b) The danger of the accident is lifted, and the people in the surrounding areas of the accident are no longer injured by the accident.

(C) the accident scene evidence collection work has been completed, the cause of the accident has been investigated clearly.

(D) The higher authorities agreed to the end of the accident.

XIV, production recovery measures

The end of the rescue work, to confirm that there is no source of danger exists in the area of the accident, before cleaning up, rebuilding or restoring power supply, production system.

XV, electromechanical transportation accident emergency rescue material and equipment standard table

No. Name Specification Unit Quantity Remarks

1 Fire extinguisher MF-8 4

2 mining vacuum circuit breaker VS1-6/1250 4

3 indoor high voltage vacuum circuit breaker ZN5-10 /110-20 4

3 indoor high voltage vacuum circuit breaker ZN5-10 /110-20 pcs 4

4 Surge arrester FZ-110J pcs 3

5 Surge arrester 2XFZ-20 pcs 1

6 Cold-shrinkable three-core intermediate connector QS2000-1 set 4

7 High-voltage cable YJV22-8.7/10kV

3×185mm2 m 500

8 Spray light PD-3 2

9 Plastic Insulation Tape 20mm Tray 20

10 Gasoline 120# Kg 10

11 Wire Cutting Pliers 500mm 2

12 Safety Belt 20

13 Raincoat 20

14 Hoist 5t 4

15 Acoustic and Optical Signal Device DX-1 6<

20 Pair of walkie-talkies 3

XVI. Accident Reporting and Emergency Rescue Communication Contact Methods

Unit or Position Contact Phone Number Unit or Position Contact Phone Number

Dispatch Room # Key or 8993 0874-4072985 Salary Section 8859

General Manager 8866 Supply Section 8831

Production Deputy Manager 8862 Finance Section 8858

Deputy Manager and Chief Engineer 8869 Integrated Mining Area 8886

Production Technology Department 8868 Excavation Area 8810 8812

Safety Supervision Office 8818 8819 Excavation Area 8820 8821

Electromechanical Area Duty Room 8897 8895 Zaojiang Mining Group Dispatching Room 0632-4081158

Duty room of the ventilation and defense area 8806 8809 Mehong Coal Management Bureau 0874-4072031

Comprehensive office 8828 0874-4072637 Part-time ambulance team of the mine 8840

Security section 8840

This plan is implemented since the date of issuance.