How to set up the Ruiyi router:
1. Open a connected PC and open the Network Neighborhood properties.
2. Then open the local connection properties, and then open the tcp/ip protocol properties.
3. Set the ip to 192.168.1.2 subnet: 255.255.255.0 gateway: 192.168.1.1. Make sure that DNS is set after configuring the router.
4. The IP network segment can be set between 192.168.1.2-192.168.1.254. Do not set the same IP for multiple computers, as this will cause IP conflicts. When the setting is here, you can open Internet Explorer on the desktop, enter 192.168.1.1 and press Enter.
5. Here you are prompted to enter the username and password. The default username and password are both admin, which is also written in the router manual. After entering, press Enter to enter the router configuration interface. Note: The default IP of tplink's router is basically 192.168.1.1, and the password is basically admin. Enter the router interface for the first time. Select the setup wizard here.
6. Choose adsl virtual dial-up here. Most of them choose it. Other static ones are chosen by dedicated line users. Broadband users, China Railway Telecom, China Netcom and other virtual dial-up users can just select it, and then download step. Click Next and Finish to set up the routing.
7. Set the network parameters, WAN port settings, and save the settings.
8. At this point, all the configurations in the router have been set up. Now it is OK to just restart the router. Click System Tools, restart the router, and it will be fine in a few seconds.
9. At this time, close the configured web page window and connect to other computers to access the Internet