Hello
Waste gas treatment I introduce you to 2 kinds of treatment process: catalytic combustion, UV light and oxygen integrated machine treatment
First: catalytic combustion device mainly consists of heat exchanger, combustion chamber, catalytic reactor, heat recovery system and purification of flue gas emission chimney and other components, as shown in the figure on the right. The purification principle is: unpurified gas before entering the combustion chamber, first through the heat exchanger is preheated and sent to the combustion chamber, in the combustion chamber to reach the required reaction temperature, the oxidation reaction is carried out in the catalytic reactor, the purified flue gas by the heat exchanger releases part of the heat, and then discharged by the chimney into the atmosphere.
Second: UV light oxygen activated carbon integrated equipment. The use of high-energy high-Oxygen UV ultraviolet beam decomposition of oxygen molecules in the air to produce free oxygen, that is, activated oxygen, because the free oxygen carries positive and negative electrons are not balanced, so it is necessary to combine with the oxygen molecules, which in turn produces ozone.
Chemical principle: UV + O2 → O - + O* (active oxygen) O + O2 → O3 (ozone), it is well known that ozone has a strong oxidation effect on organic matter, on the malodorous gases and other irritating odors have an immediate effect.
The use of high-energy UV beams to crack the molecular bonds of bacteria in the malodorous gas, destroying the bacterial nucleic acid (DNA), and then through the ozone oxidation reaction, to completely achieve the purpose of deodorization and killing bacteria.
When the malodorous gas is input to the purification equipment using exhaust equipment, the purification equipment uses high-energy C-wave beams and ozone to carry out synergistic decomposition and oxidation reaction on the malodorous gas, so that the malodorous gas material is degraded and transformed into low molecular compounds, water and carbon dioxide, and then discharged outdoors through the exhaust pipe.
The use of special high-energy beam irradiation of malodorous gases, cracking malodorous gases such as: ammonia, trimethylamine, hydrogen sulfide, hydrogen methyl sulfide, methyl mercaptan, methyl sulfide ether, dimethyl disulfide, carbon disulfide and styrene, sulfide H2S, VOC class, benzene, toluene, xylene, the structure of the molecular chain, so that organic or inorganic polymer malodor compounds molecular chain, irradiated by high-energy ultraviolet beams, degraded into low molecular compounds, such as CO2, H?O and so on.
Third: is based on special exhaust gas specialization. Customized treatment equipment.