Special equipment use management regulations

In order to strengthen and standardize the management of the use of special equipment, the General Administration of the development of the "Management Regulations on the Use of Special Equipment", I would like to introduce you to the management of the use of special equipment regulations, I hope to help you.

Chapter I General

Article I In order to strengthen the safety supervision of special equipment, to prevent and reduce accidents, to protect the lives of people and corporate property safety, based on the national "Special Equipment Safety Supervision Regulations", the development of this system,

Special equipment use management system.

Article II of this system applies to the management of the company's special equipment, specifically involving life safety, dangerous boilers, pressure vessels (including gas cylinders, the same below), pressure piping, lifting machinery, and plant-specific motor vehicles.

Article III of the company's main person in charge of the unit should be fully responsible for the safety of special equipment and energy saving. Establish and improve the safety of special equipment, energy saving management system and job safety, energy saving responsibility system.

Article IV of the company's deadline to accept the special equipment safety supervision and management department in accordance with the law of special equipment safety inspection.

Chapter II, the use of special equipment

Article V, the use of special equipment, must be strictly enforced by the relevant state regulations and production safety laws, administrative laws

regulations, to ensure the safe use of special equipment

Article VI, the company should be used in accordance with the safety specifications of the special equipment. Special equipment before use, the use of units should check the safety and technical specifications require design documents, product quality certification, installation and maintenance instructions, supervision and inspection of documents

Article VII of the special equipment in use before or within 30 days after the use of special equipment safety supervision and management department in a timely manner to the city registration. Registration mark should be placed or attached to the special equipment in a prominent position.

Article VIII of the company shall establish special equipment safety technology files. Safety technology files should include the following:

(a) special equipment design documents, manufacturing units, product quality certification, use and maintenance instructions and other documents, as well as the installation of technical documents and information;

(b) regular inspection of special equipment and regular self-inspection records;

(d) the special equipment should be used to record;

(a) special equipment should be used in a timely manner. > (D) special equipment and its safety accessories, safety protection devices, measurement and control devices and related ancillary instrumentation for routine maintenance records;

(E) special equipment operation failure and accident records;

(F) energy-consuming special equipment, energy efficiency test reports, energy consumption records and energy-saving transformation of technical data.

Article IX should be used in the special equipment for regular routine maintenance, and regular self-inspection. Branches and workshops should be in the use of special equipment should be at least once a month for self-inspection, the company quarterly inspection, and make a record. Special equipment use units in the use of special equipment for self-inspection and routine maintenance of abnormalities found in the situation should be dealt with in a timely manner.

Equipment management should be in the use of special equipment, safety accessories, safety protection devices, measuring and regulating devices and related ancillary instrumentation for regular calibration, overhaul, and make records.

Boiler units should be used in accordance with the requirements of the safety specifications for boiler water (medium) quality treatment, and accept the implementation of special equipment inspection and testing organizations water (medium) quality treatment of regular inspection.

Without regular inspection or inspection of unqualified special equipment, shall not continue to use.

Article 10 of the special equipment failure or anomaly, it should be a comprehensive inspection, to eliminate potential accidents before being put back into use.

Special equipment does not meet the energy efficiency indicators, the use of special equipment units should take appropriate measures to rectify.

Article 11 of the special equipment, there are serious hidden accidents, no transformation, maintenance value, or more than the safety specifications for the use of life, should be scrapped in a timely manner, and should be registered to the original supervision and management of special equipment safety department for cancellation.

Special equipment safety management personnel should be the use of special equipment to carry out regular inspections, found that the problem should be dealt with immediately; in case of emergency, you can decide to stop the use of special equipment and promptly report to the person in charge.

Article XII of the boiler, pressure vessels, elevators, lifting machinery, plant-specific motor vehicle operators and their related management personnel (hereinafter collectively referred to as special equipment operators), should be in accordance with relevant state regulations by the special equipment safety supervision and management department to qualify for the examination, obtain the national unified format of the special operators certificate before engaging in the corresponding operations or management.

Article 13 of the company's special equipment operators for special equipment safety, energy saving education and training once a year to ensure that special equipment operators have the necessary special equipment safety, energy saving knowledge.

Special equipment operators in the operation should strictly implement the operating procedures of special equipment and related safety regulations.

Article 14 of the special equipment operators in the course of operations found in the accident or other unsafe factors, should be immediately reported to the site safety management personnel and the person in charge.

Chapter III special equipment maintenance, maintenance management

Article 15 of the maintenance of special equipment should be consistent with national regulations, norms and technical requirements.

Article XVI of the daily maintenance and repair of special equipment, by the use of the department, the operator is responsible for, and make a record.

Article XVII of special equipment maintenance, maintenance should be carried out by qualified units, including elevators should be cleaned, lubricated, adjusted and inspected at least once every 15 days.

Article 18 of the special equipment inspection to implement the daily inspection team, workshop weekly inspection, the company's special equipment management personnel monthly inspection of the three-tier inspection system, and make a good inspection records. The relevant departments must be on the special equipment, safety accessories, safety protection devices, measurement and control devices and ancillary instrumentation for regular calibration, overhaul.

Article 19 of the scientific management of special equipment, reasonable maintenance, planned maintenance, consolidate and improve the integrity of the equipment, to ensure the realization of the target.

Article 20 found faults in a timely manner to eliminate, can not immediately eliminate the faults, to be recorded in detail, reported in a timely manner, and combined with equipment maintenance program to be eliminated.

Article 21 regular inspection and maintenance, and take the initiative to the operator to understand the operation of the equipment

Article 22 of the equipment to implement the "fixed person fixed machine" of the person responsible for the system, carefully fill in the operating records.

Article 23 of the key parts of the equipment to do a good job of maintenance work.

Article 24 of the special equipment operators should work in strict compliance with safety regulations.

Article 25 special equipment operators in the process of operation found in the accident hidden danger or other unsafe factors should be immediately rectified, or report to the competent leadership to deal with.

Chapter V Special Equipment Emergency Rescue

Article 26 of the special equipment company should develop "accident emergency rescue plan". Accident emergency rescue refers to the threat to the lives of people or cause property damage to the company's emergency, a series of rescue and treatment work taken.

Article 27 of all employees in the company in the event of an accident, should actively participate in emergency rescue work.

Article 28 of the accident or casualties, the person in the know must be the fastest speed by phone or other means of communication, the accident will be reported to the departmental leadership; departmental leadership should be quickly reported to the leadership of the company and the special equipment safety management department.

Article 29 employees in the event of an emergency threatening personal safety, should take possible emergency measures to evacuate the operation

Article 30 of the company's accident emergency rescue leading group and the relevant departments in the receipt of the accident report, should be quickly rushed to the scene, according to the "Accident Emergency Rescue Plan" or other effective ways to direct the rescue work, regardless of what measures to take emergency rescue, should first be used to reduce the number of injuries and deaths, should be the first to reduce the number of people, should not be used for the rescue work. No matter what measures are taken to carry out emergency rescue, various measures to reduce casualties and alleviate the pain of the injured shall be adopted first. Article 31 of the accident emergency rescue personnel, in the rescue process, must listen to the leading group of the accident emergency rescue command, each in position to carry out the necessary rescue work on the accident, and pay attention to self-protection, correctly wear protective gear and use protective equipment, to avoid injury to themselves.

Article 32 When the nature of the accident is serious, the leading group of accident emergency rescue work, should be to the city emergency rescue departments and nearby production and management units, communities for help.

Chapter V special equipment accident handling

Article 33 special equipment accidents according to the degree of damage to the equipment is divided into explosion accidents, serious damage accidents and general damage accidents.

Article 34 explosion refers to the boiler, pressure vessel and pressure piping in the process of use or pressure test, the destruction of pressurized parts, equipment, the medium of the rapid release of stored energy, the internal pressure instantly down to the outside world of atmospheric pressure and pipeline leakage triggered by various types of explosive accidents.

Article 35 of the serious damage to the special equipment in the use of the process, due to structural components, safety accessories, safety protection devices damaged, resulting in equipment to stop the operation of the accident must be repaired. As well as pressure vessels and pressure piping due to leakage caused by fire, poisoning and pressure piping damage to the accident, also belongs to the serious damage accident.

Article 36 of the general damage accident refers to the pot capacity of the pipe special in the use of minor damage and do not need to stop the operation of the repair, as well as pressure piping leakage did not cause other disasters.

Article 37 after the occurrence of special equipment accidents, the accident department should be quickly to the special equipment safety management department, equipment department and the company's competent leadership report. If it is a serious damage accident, explosion, by the special equipment safety management department in accordance with the "boiler pressure vessel pressure piping special equipment accident handling provisions" of the procedures and content of the report to the special equipment monitoring department and other relevant departments at higher levels.

Article 38 of the accident occurred, the department of the accident should take active measures to rescue personnel and prevent the expansion of the accident, and the scene of the accident to take additional blocking rope, posting "forbidden to enter", "forbidden to destroy the scene of the accident" sign, set up a person to supervise and other measures to protect the scene of the accident.

Article 39 belongs to the general damage to the accident occurred, by the leadership of the plant before the accident equipment conditions, accident casualties, equipment damage and economic losses, as well as the cause and nature of the accident investigation and analysis, to determine the responsibility for the accident, the accident treatment recommendations. After the accident investigation, the accident investigation team to fill out the accident investigation report.

Article 40 belongs to the serious damage accidents, explosion accidents, by the company's leadership, equipment departments and accident-related personnel jointly set up an accident investigation team to determine the responsibility for the accident, put forward proposals for accident handling. After the accident investigation, the accident investigation team to fill out the accident investigation report. To cause major injuries and deaths of employees or major property damage accidents and constitute a crime responsible person, to the judicial organs to investigate criminal responsibility.

Chapter VI Supplementary Provisions

Article 41 of this system is proposed by the company's equipment management department.

Article 42 of this system by the company's equipment management department is responsible for interpretation.