The main look at your company is ready to produce what type of products, class I, class II or class III, if not class III, you want to produce the product to draw a process flow chart, that is, the first step first what to do, the second step what to do, and then ...... and so on, it can be a block diagram can also be the words Plus arrows can be, and then the process flow diagram to find relatively important processes, such as welding, painting, plating, sterilization, etc., these processes need to be marked out on the process capabilities to confirm that the main people, machines, materials, methods, environment. People are the operators of the process, such personnel need to be trained before starting work, if necessary, to obtain the appropriate qualifications; machine is the process of equipment, such as welding machines, sterilization lamps, etc. need to confirm the ability of the equipment to meet the requirements of the process; the law is the operation of the process of the operating instructions, including process parameters, processes, methods, etc.; material is the raw material, the raw materials must be purchased from qualified suppliers, and after the incoming test to ensure that the quality of raw materials; the ring is the environment, the environment, the environment is the environment, the environment is the environment, the environment is the environment, the environment is the environment. Material is raw materials, raw materials must be purchased from qualified suppliers, and after incoming inspection, to ensure the quality of raw materials; environment is the environment, the process environment must meet the needs of the product, such as sterilization environment, the use of pure water. If the product is relatively simple to write a simple. In the key or special process of the box diagram labeled with a few numbers, and then below the text description can be.
I hope this helps.
I hope this helps.