1. The stencil is not cleaned: before installing the atomizing tray, the stencil should be washed with detergent or water to eliminate surface dirt, oil and rust. If the stencil is not properly cleaned, a layer of oxidized skin may form on its surface, making the lime slurry adhere poorly.
2. Lime slurry slurry and atomizing disk mismatch: in the selection of lime slurry material, it should be matched with the specifications and geometric requirements of the atomizing disk to ensure the match and coordination between them. If an unsuitable lime slurry material is selected, it may result in poor adhesion.
3. Poor quality of lime slurry construction: During the construction of lime slurry, attention needs to be paid to the mixing ratio, mixing uniformity, painting uniformity and compaction uniformity, and so on, and these aspects of work, if not done properly, will lead to poor quality of lime slurry and poor adhesion.
4. Uneven surface of atomizing tray: If the surface of the atomizing tray is uneven, you will face the problem that the lime slurry is difficult to adhere to its surface evenly.
5. Unsuitable ambient temperature or humidity: If the work is done in cold weather or in humid environment, it may lead to poor adhesion of lime slurry. In this case, you can take the way of heating or humidity reduction to improve the adhesion effect.
Overall, the reasons why the atomized disk sticks to the lime slurry are manifold, and it is necessary to carefully select the appropriate lime slurry material before construction, make sufficient preparation for the construction environment, and do a good job in the details to ensure good adhesion.