How to do a good job of cold storage safety management is as follows:
In the storage area (including all buildings), it is not allowed to pull the temporary wires, unauthorized installation of sockets; overloading is not allowed to work; it is not allowed to use unqualified safety devices. Indeed need to be reported to the safety director for approval, by a full-time electrician is responsible for the installation.
When the electrical wires are set up in the warehouse, the main wires should be located outside the warehouse, and the wires introduced into the warehouse must be installed in flame-retardant plastic tubes, and the wires and lamps should be installed above the passageway of the warehouse.
Approved by the platform, Chuan Tang, the warehouse in the use of a variety of electrical machinery and equipment, must be strictly enforced safety regulations, frequent inspections, regular testing. Found that may cause sparks, short-circuit, heat and poor insulation of wires, etc., must be repaired in a timely manner.
The storage of goods, must meet the fire requirements, are not allowed to occupy the fire escape and block fire hydrants, the width of the main channel should be greater than 2M; secondary channel should be greater than 1.2M, and according to the provisions of the "five distance"; commodities and chandeliers distance of not less than 0.5M.