1, the size of the largest specification can be done W6m * HlOm
2, opening speed 0.8-1.8m/SO
3, the door frame structure and the curtain material: the curtain for the 0.8mm French industrial polyethylene coated cloth, a variety of colors to choose from, (yellow, blue, white, red, gray) tear degree 600N warp / weft Tensile strength: 4000/3500 (warp/weft) N5cm, operating temperature: -37+70 degrees Celsius, color fastness: 7-8, glass strength 100N/5cm, optional transparent windows. Door frame material for the 2.5mm Baosteel production of high-quality cold rolled plate steel baking, painting process, or 2.0mm stainless steel 3.5mm thick antioxidant treatment of high-quality aluminum alloy column.
4, curtain color: yellow, blue, red, silver, gray or fully transparent, plus transparent windows.
5, safety performance: the door is equipped with infrared safety devices at the bottom of the main, while the bottom of the curtain cloth optional airbags (optional configuration) to ensure that the door falling process of the injury to personnel and goods.
6, sealing performance: the bottom end is equipped with elastic pvc air barrier cloth, or airbags, and can be kept close to a variety of uneven ground. Door pillar sealing: the use of both sides of the sealing furring better increase its sealing and noise reduction effect.
7, power performance: the use of Germany's famous brand of fast door motor, or Taiwan brand, AC 220v or 380v optional, IP55, 50HZ, power 0.75-1.5 kW 1500 rpm, can carry large loads of safe operation,
8, wind performance: these products are mainly used in the workshop door, logistics, access door, can also be used for external wind pressure or negative wind pressure, can also be used for external wind pressure or negative wind pressure, can also be used for external wind pressure or negative wind pressure. Can also be used in the outside wind pressure or negative pressure condition of good doorway, channel, wind resistance is weak, less than 3.5 wind.
9, control mode: Tiantong company provides you with a variety of manual or automatic system control to meet the requirements of various types of sites on the door opening or closing mode to adapt to the different requirements of the production site.
Mainly:
(1) Manual button type (basic configuration)
(2) Manual pull rope (economical)
(3) Remote control type (can be controlled from a distance)
(4) Magnetic ring type (applicable to vehicles and equipment channel)
(5) Radar (applicable to the flow of large amounts of logistics and personnel channel)
(6) Double-sided photoelectric: (special logistics channel) channel)
(7) Two doors interlocking chain: (for high cleanliness requirements
(8) Other: can be accessed through a variety of sensor signals to the PLC or directly through the program settings.