1, first, you need to load a known good standard card grinder head.
2, second, adjust the pressure between the needle and the standard card grinding head.
3, Next, adjust the rotation speed of the card grinder.
4, next, place the card grinding needle head in the center of the standard card grinding head, start the card grinding needle machine, so that it rotates around the center point.
5. Next, take a reading from the probe card grinder and record it.
6, secondly, the readings appear to deviate greatly, then you need to calibrate the probe according to the readings of the standard card grinding head, in order to ensure that the probe can accurately read the data on the card grinding head.
7. Finally, repeat the above steps until accurate readings and calibration results are obtained.