Facilities for pig farms, as follows:
The feeding system of the ring row scraper feeding equipment is running in the closed ring row pipe and connected with the feed bin, when the feeding troughs are filled up, the excess feed can be recycled to the feed bin. It is suitable for unlimited feeding of dry powders and pellets, and can also be used for limited feeding if equipped with a metering box. This kind of feeding equipment can transport feed in horizontal and vertical plane, so it is beneficial to the reasonable layout of pig pens and mechanical equipment, avoiding feed contamination, loss, and easy to realize feeding automation.
Mechanized pig development process can be roughly divided into three stages, initially part of the mechanization stage, that is, pig production of individual aspects of mechanical operation, but still need to be supplemented by a large number of manual labor, the production of each 100 kg of pork requires about 25 to 35 man-hours. To the mechanization stage, the main aspects of pig production basically mechanical operation, but also need to be supplemented by a small amount of manual labor, there is still a certain dependence on the natural environment, the production of every 100 kg of pork about 12 to 19 man-hours.
Other aspects
The lying area and the fecal area are separated by a partition wall and equipped with movable doors that can be opened and closed. A waterer is set up in the fecal discharge area, and the movable door is opened on weekdays to take advantage of the pigs' habit of excreting feces and urine when drinking, and concentrate the feces in the fecal discharge area for easy removal. Closing the movable door can make the fecal discharge area of each pen into a channel, and use the scraper to remove the feces. This kind of pen can keep the lying area dry and clean, reduce the waste of feed, but because the fecal area is located in the hog house, it is easy to cause air pollution in the hog house, and the ventilation of the hog house should be strengthened when it is used.
There is also heating equipment in the birthing pen, commonly used infrared lamps, resistance wire heaters, gas heaters, electric mats, etc., can also be used to heat the ground with underground hot water pipes. Feeding troughs are set up on one side of the activity area of the piglets, and drinkers are set up at the gap floor on the other side. Feeding equipment for dry, wet and dilute feed feeding machinery and equipment are screw conveyor type, reciprocating scraper type, ring scraper type, ring chain plate type and dilute feed pipeline conveyor type, in addition to automatic feeding troughs and a variety of feed wagons.