Points that should be noted in the power supply safety of the air shower room: usually there are four places in the air shower room can cut off the power supply: the power switch of the outer box of the air shower room; the control panel of the inner box of the air shower room; the two sides of the outer box of the air shower room (here the power switch can be prevented from cutting off the power supply in case of emergency, and effectively improve the personal safety of the staff). Air shower room civilized construction measures. Sequential operation - according to the procedures of construction, the order of operation is reasonable, not due to the reversal of the work process caused by rework, waste and impede the operation of other projects, the operation plan is clear, the personnel and institutional arrangements are organized, not chaotic, not nest work. Roads, electricity - construction arrangements are appropriate, do not cut off or block the site traffic arterial events, do not affect the site of the normal order of electricity. Material neatly - construction of equipment, materials, components led out of the yard neatly, does not affect the construction site traffic, and have appropriate storage protection measures, not lost or damaged. Cleanliness and hygiene - the project workplace and its plant inside and outside always to maintain health and cleanliness.
Machinery neat and tidy - engineering use of machinery, vehicles well-maintained, clean appearance, no dirt, dust. Machinery and vehicles are parked neatly with protective facilities. Environmental protection measures. On-site waste materials shall be piled up in accordance with the designated location of the project department. The equipment packing boxes arriving at the site shall not be thrown around, and shall be piled up according to the designated location. The site shall not be lit anywhere to prevent fire. The so-called air shower room is a man-made environment, which contains particles much lower than the general environment, with the rapid growth of integrated circuit technology, but also increased the demand for manufacturing environment (clean room) cleanliness, in the industry even if the size of the particles of less than 1 micron, but also may impede the operation of the product or reduce its life. Clean bench is a kind of air purification equipment to provide a local dust-free, sterile working environment, and can be contaminated air in the work area has been artificially controlled through a special filtering channel discharge, to avoid harm to people and the environment, it is a kind of safe microorganisms dedicated to the clean bench, can also be widely used in biological laboratories, medical and health care, biopharmaceuticals and other related industries to improve the process conditions, to protect the operator's physical health, improve product quality and yield It can also be widely used in biological laboratories, medical and health care, biopharmaceuticals and other related industries to improve process conditions, protect the health of operators and improve product quality and yield.