The oil separation and lifting integrated equipment adopts mechanical grating device to separate the solids in wastewater automatically and reduce the subsequent blockage. As well as automatic oil scraping device to recover oil and grease, oil scraping plate covers a large area, corrosion resistance, easy to replace, scraping oil with low water content. Equipped with automatic controller, 24 hours segmented treatment.
The working principle of oil separation and lifting integrated equipment: it is to use the oily sewage under the action of gravity, with the help of the difference between the specific gravity of oil and water, to remove the floating oil in the wastewater and part of the finely dispersed oil by natural floating separation. The product mainly consists of four tanks respectively, when the kitchen drainage water flows to the tank, the stainless steel filter frame will be the solid debris (leaves, etc.) intercepted to remove, into the second tank, the use of oil-water density difference to make oil-water separation. Waste water flows downward along the oil separator plate of the second tank, and is purified and discharged from the physical device after entering the third tank. Human oil and water filter stainless steel grease trap in the second tank of oil beads particles along the grease trap plate set upward floating flow, always floating in the stainless steel grease trap in the second tank, and then manually excluded by themselves.
Changzhou light standard of the role of the oil separation and lifting integrated equipment is the use of natural uplift method to separate and remove the oily wastewater in the floatable oil substances in the structure. Oil separation and lifting integrated equipment can remove the floating and coarse dispersion state in the sewage density is less than the petroleum substances, while in the emulsification, dissolution and fine dispersion state of the oil almost no effect.
The basic requirements of oil separation and lifting integrated equipment are as follows:
1, oil separation and lifting integrated equipment must have both oil collection and sludge discharge measures.
2, the oil separation and lifting integrated equipment should be closed or add movable cover to prevent the oil and gas pollution of the environment and fire accidents, and at the same time can play the role of rain and heat preservation.
3, cold areas of the man-made small grease trap should take effective heat preservation and cold measures to prevent the dirty oil solidification. In order to ensure smooth flow of dirty oil, can be set in the oil collection pipe and dirty oil delivery pipe under the heat source for the steam heater.
4, oil separation and lifting integrated equipment around a certain range should be identified as a no-fire zone, and equipped with adequate fire-fighting equipment and other fire-fighting means. Oil separation and enhancement of integrated equipment for fire prevention generally use steam, usually in the pool top cover below 200mm along the wall of the pool to set up a circle of steam fire pipeline.
5, grease trap lifting integrated equipment near the steam pipeline connector, in order to connect the temporary steam to extinguish the fire, or in the winter when the temperature is low due to the solidification of the oil caused by the pipeline clogging or the pool wall and so on, when the sticking of dirty oil to clean up the pipeline or decontamination.
Changzhou light standard grease trap lifting integrated equipment scope of application: widely used in all kinds of hotels, canteens, hospitality and business restaurants belonging to the kitchen drain grease trap lifting integrated equipment for cleaning. Made of stainless steel, beautiful and practical, high strength, long life, compact structure, small footprint, easy to install and use. Has a good grille function, vegetable residue debris discharged into the grease trap to enhance the integration of equipment can be effectively intercepted, only need to salvage with a leaky mesh spoon. If too much grease on the filter can be put out of the leakage net, rinse it with hot water, and put it back in the original place. According to the use of stainless steel grease trap if the surface layer of grease more than 5cm thickness, it must be drained. The bottom of the grease trap lifting integrated equipment is equipped with two evacuation tubes, plus the valve is usually closed; thorough cleaning of the pool can open the valve, the grease trap lifting integrated equipment, the water and the bottom of the sludge all discharged.