Medical lead doors are divided into the following types:
1, manual swing door using a pivot type, the upper and lower shafts are each equipped with bearings, bearing capacity, the door body surface can be fingerprint resistant stainless steel plate. Square steel welded and welded with argon arc welding, smooth and good-looking exterior, specially customized special high-performance locks (imported locks), solid and durable, low failure rate, manual swing doors open convenient, solid structure, beautiful and generous.
Suitable for radiation protection machine room, CT room, radiology, etc.. Different specifications of protective doors can be designed and made according to customers' needs.
2, imported electric sliding door for the upper hanging type, mute track design, the sliding door is placed outside the door hole (inside), the distance from the wall is not more than 7mm, the distance from the ground is not more than 5mm, the track is smooth, easy to push and pull, the upper part of the door is installed with stainless steel decorative cover, and concave handles are used on the side of the door, which is beautiful and convenient.
Because hospitals are commonly used in X-rays (including chest X-ray and CT, etc.). the ability of X-rays to penetrate metals decreases with the increase in the atomic number of the metal.
So lead, as element 82, has a very weak penetration of X-rays, less than a few micrometers. It is the best to use it for radiation protection doors.
Two, medical protection lead door how to test
1, medical protection lead door installation is completed must do a good job of formal inspection, high quality radiation protection lead plate is laminated. The surface of the radiation protection door is made of stainless steel, and each switch can be used flexibly. Installation should be carefully checked. Maintenance should be timely. Medical protection doors have special uses. They are generally made of high-density stainless steel and lead plates, which are bonded by cold high-pressure bonding technology. Seams and other mats cannot be removed until the cement paste or styrofoam of the medical protective door is completely dry.
2, check whether the switch of the medical protective lead door can work properly. Details, medical lead doors provided by medical lead door manufacturers are generally equipped with stainless steel protective door special hinges. A comprehensive check should be noted that the medical lead doors on the market. The doors are made of national standard steel fan ribs and stainless steel as panels. The ray protection door is invisible and transparent and cannot affect the escape time. The ray protection door is a kind of door with high safety protection, so do a good job of safety protection. The ray protection door can be customized with the color you want to ensure that there will be no subsequent deformation. Any similar details in the installation process should not be ignored.
3, medical lead doors quality inspection, equipped with various specifications of special engineering locks; further testing is indispensable. After the installation of medical lead doors, the need to further open the ray protection test. Usually, under the supervision of a person, hardware accessories are imported materials, vertical positioning of the border, in line with the requirements of the point to the surface. It can well extend the service life of the ray protection door. Radiation protection doors need to be equipped with mechanical locks, and the hinges of the door shaft should be strengthened. Zero distance visual communication with the outside world, mainly to prevent people from falling from height, can ensure that people can get out of danger. A slight lack of abnormality will bring potential safety hazards, so it should be adjusted and maintained in a timely manner while installing.
4, medical protection lead door edge covering surface perpendicular to the wall, in general, we can pay attention to his material problems during acceptance. Radiation protection doors should be equipped with emergency escape devices. When we buy, we can ask the manufacturer to set up. Reduce the physical harm caused by air conditioning. The surface of the medical protective lead door is easy to clean, and the gap between the door leaf and the door frame is uniform.