With the gradual development of society, job responsibilities will be used in many places. Any job responsibility is a synthesis of responsibility, power and obligation. How much responsibility should be borne by as much power as possible, and how much responsibility should be fulfilled by as much power as possible. Any separation will cause problems. So is it really difficult to formulate job responsibilities? The following is the job responsibilities of the repairman I sorted out for you, for reference only. Welcome to reading.
Responsibilities of the repairman: 1 1, responsible for the installation, debugging, daily maintenance and maintenance of all equipment of electrolytic aluminum plate and carbon anode plate, so as to ensure the safe and stable operation of the equipment;
2. Responsible for the daily management of maintenance department, electrolytic process team and cleaning maintenance team, pay special attention to team building, implement management and assessment;
2. Be responsible for formulating and improving various management systems of the workshop, and promoting and implementing daily management in an orderly manner;
3, responsible for the maintenance department monthly, quarterly and annual work objectives and work plans, and organize the decomposition and implementation;
4. Complete other tasks assigned by functional departments and superior leaders.
Job responsibilities of repairman 2 1. Maintain and repair the equipment, facilities and instruments of the sewage pumping station, assist relevant units to collect, analyze, compare and calibrate the water samples of monitoring instruments, and carry out dredging, detection and repair of the sewage pumping station.
2, master the working principle and related parameters of sewage pumping station mechanical equipment, instruments and other facilities, familiar with the switch operation and adjustment of equipment and facilities.
3. Master the principle, program modification and troubleshooting of the automatic control system of sewage pumping station, and carry out relevant maintenance work on the automatic control system.
4. Be familiar with the relevant parameters and working principles of important electrical equipment such as high and low voltage distribution rooms and transformers, and follow up the feedback from the trustee of the electrical room.
5, according to the needs of production and operation, actively cooperate with personnel deployment arrangements, and cooperate with emergency duty when necessary.
Job responsibilities of repairman 3 1. Maintain and repair all kinds of track civil facilities and equipment according to the operating procedures, and be responsible for driving the track sweeper to clean the whole track.
2, troubleshooting common rail civil facilities and equipment.
3 to deal with the emergency repair of public works and civil facilities.
4. Complete other work arranged by the leader.
Job responsibilities of the mechanic 4 1, responsible for the maintenance and troubleshooting of mechanical equipment in production facilities;
2. Be responsible for the installation and debugging of the company's mechanical equipment;
3. Track the process of equipment installation, commissioning, use and acceptance.
4. Be responsible for all kinds of information about newly purchased equipment, and write equipment operation and maintenance procedures.
5. Be responsible for on-site maintenance, technical condition control and maintenance management of equipment.
6. Assist the establishment and implementation of the company's equipment management system.
5. Be responsible for the analysis and evaluation of equipment technology and maintenance status.
6. Be responsible for the maintenance of equipment in the area under its jurisdiction, and deal with technical problems at the equipment site in time.
7. Be responsible for the technical innovation and transformation of equipment and the collection and accumulation of relevant information and intelligence.
8, responsible for the evaluation of equipment management system, and put forward reasonable suggestions.
9. Provide technical support and reasonable suggestions for equipment improvement, installation and maintenance.
10. Be responsible for training equipment operators, important equipment adjusters and workshop managers on "Operation and Maintenance Norms", "Adjustment Technology" and "Equipment Management Concepts, Norms and Systems".
1 1, responsible for 6S management of the workshop;
12. Complete other tasks assigned by the leaders.
Maintenance man 5 Job responsibilities 1, responsible for the maintenance of all production equipment and other facilities in the base.
2. Provide suggestions and opinions for the revision and improvement of various rules and regulations and operating procedures of this department.
3, responsible for the maintenance and troubleshooting of production facilities, mechanical equipment and electrical equipment;
4. Responsible for metal pipeline welding, UPVC pipeline bonding and PPR pipeline hot melting in the company;
5. Responsible for the production and processing of equipment and accessories in the process of internal technical transformation;
6, according to the maintenance plan, the specific implementation of maintenance work;
7. Carry out 6S work in the maintenance workshop;
8. Be responsible for the installation and maintenance of daily life tools and sundries, and complete other tasks assigned by leaders.
Repairman 6 1 Job responsibilities, responsible for daily maintenance, maintenance and troubleshooting of electrical equipment.
2, electrical maintenance professional daily work arrangement, personnel management;
3, responsible for the preparation of desulfurization electrical overhaul, temporary repair, scheduled inspection plan, processing working ticket;
4. Provision and declaration of spare parts for electrical maintenance materials. Review the material consumption and spare parts use plan of maintenance work to reduce consumption, and pay special attention to the preparation of man-hour quota;
5. Technical supervision and audit of electrical maintenance team, establishment and supervision of work quality standards, process cards and technical management systems;
6, electrical maintenance work log record, management, drawing data collection;
7. Put forward corresponding technical measures and schemes for major projects or technical transformation projects, and supervise the quality of outsourced projects;
8. Investigate and analyze related accidents and formulate preventive measures;
9, do a good job in electrical maintenance professional and technical training;
10, do a good job of technical supervision;
1 1, go deep into the field to master the operation of electrical equipment and make regular inspections;
12, establish and maintain the professional and team image, and abide by the rules and regulations of the project department and labor discipline.
12, cooperate well, and complete other work assigned by superior leaders.
Job responsibilities of repairman 7 1. The repairman is the first person responsible for the maintenance operation of team equipment, responsible for the monitor and team technicians, and responsible for implementing various rules and regulations issued by the company and departments.
2. Seriously implement the rules and regulations formulated by the superior and the company, obey the work arrangement of department leaders, adhere to principles, work actively, be serious and responsible, and take care of the overall situation.
3. Seriously attend the meetings before and after daily work; Weekly safety learning meeting. Strictly implement the "two votes and three systems" to ensure the safety of personal equipment and consolidate the foundation of the security team.
4. Before the construction, organize the maintenance workers to analyze the dangerous points, ensure the safety and reliability of the maintenance work of the staff, and check the implementation of various measures in the maintenance process at any time.
5. Seriously complete the routine work of the equipment under its jurisdiction and complete the rectification of various special safety inspections.
6. Ensure the daily maintenance of the equipment under its jurisdiction and eliminate the defects of the equipment under its jurisdiction in time.
7. Finish all the work assigned by the department on time.
8. Complete the equipment maintenance plan, summary and equipment maintenance account records on time, with detailed and accurate contents.
9, strictly abide by the safety rules and regulations, and consciously put an end to the phenomenon of "three violations".
10. Wear work clothes issued by the company to meet the labor requirements, and wear job marks at the same time.
1 1. The repairman is the first person responsible for the safety of the equipment maintenance working ticket.
12, responsible for the healthy and stable operation of the equipment under its jurisdiction; Be responsible for the maintenance quality of equipment after maintenance.
13, I am responsible for the maintenance project, and I am responsible for the personal safety and equipment safety during the maintenance. Outsourcing maintenance projects, supervising and inspecting the mental state of operators undertaking maintenance projects and the implementation of various safety technical measures.
14, earnestly implement the safety objectives of abnormal and attempted control of departments and teams, and make safety technical analysis and prediction according to the equipment system (maintenance regulations) so as to find problems and abnormalities in time and carry out safety control.
15, seriously implement safety rules and regulations, stop illegal behaviors in time, learn accident notification in time, learn lessons, and take measures to prevent similar accidents from happening again.
16, responsible for technical disclosure of maintenance and safety measures during work (maintenance, test, etc. ), and make records, inspection and assessment of illegal behavior on the spot.
17. Cooperate with the team to carry out regular safety inspection activities, "safety production week" and other activities, and implement the anti-accident measures issued by superiors, companies and departments.
18. Carry out the principle of "compulsory courses should be attended, and compulsory courses should be excellent", achieve civilized maintenance, and be responsible for the maintenance of working environment, safety facilities, equipment and instruments in the workplace. The maintenance site should be "cleared after work".
19, support the team safety officer to perform his duties. The anomalies, obstacles, attempts and accidents of the team should be registered and reported in time to protect the scene of the accident, analyze the reasons, sum up the lessons and implement the improvement measures.
Job responsibilities of repairman 1. Job responsibilities
1, the repairman accepts the leadership of this section, accepts the guidance of professional technicians and shift technicians in business, and is responsible for the work within the scope of division of labor to ensure the maintenance quality.
2. Be responsible for the safe operation of the equipment under its jurisdiction and ensure the health level.
3. Be responsible for fully implementing all production and non-production tasks arranged by the monitor.
4. Take direct responsibility for the safe operation of the equipment, prevent and eliminate all kinds of accidents, obstacles, anomalies and defects, and reduce the temporary repair of the equipment.
5. Be directly responsible for equipment maintenance technology, progress and quality, accuracy and completeness of original records and civilized production.
Second, the work content and requirements
1, equipment management, daily maintenance work
1. 1 adhere to the daily equipment hygiene and cleaning system, and the maintenance workers will conduct routine inspections on the equipment in charge. Understand the found equipment defects, parts that need to be repaired, improved and replaced, and report the length in time. Register in time according to the procedure of eliminating equipment defects until the monitor arranges to eliminate defects.
1.2 the person in charge of the equipment is responsible, and the equipment integrity rate is 100%.
2. Eliminate equipment defects
2. 1 actively eliminate equipment defects, so that small defects will not last for a long time and big defects will not, and reliable safety measures will be made for defects that cannot be eliminated in time, and the defect elimination rate will reach over 95%.
2.2 After the repairman receives the task of eliminating defects assigned by the section chief, the working director should write a qualified application form and working ticket for maintenance work, and submit them for approval according to normal procedures, and at the same time make preparations for instruments.
2.3 Maintenance personnel shall ensure the quality of maintenance, complete the work specified in the working ticket and do everything possible to eliminate defects within the time of application for approval. If the task cannot be completed on time due to some objective reasons, it shall be reported in time and the extension formalities shall be handled.
2.4 After the maintenance personnel eliminate the equipment defects, they should clean up the site to ensure that the site is free of sundries, well-equipped and the ground is clean. Finally, the person in charge of the work can handle the work ticket to end the work, and the operators can end the work after passing the acceptance.
2.5 After the equipment is eliminated and put into use, the operation and elimination of equipment shall be timely understood.
3. Major and minor repairs
3. 1 major and minor repairs shall be carried out according to the equipment maintenance standards formulated by the equipment department.
3.2 according to the planned time limit for a project, under the unified arrangement of the long section, complete the tasks assigned on time.
3.3 Major and minor repairs of equipment shall be carried out in accordance with the principle of "all repairs should be made", and the planned maintenance items shall not be omitted or reduced at will. On the basis of self-inspection, inspection, acceptance and quality inspection shall be carried out according to the maintenance standards. The three-level (operator, equipment department and production department) acceptance must be in place, with complete procedures and excellent maintenance quality.
3.4 Equipment overhaul must be completed within the time limit approved by the production department. Special circumstances can not be completed within the planned period, should apply for revision of the plan step by step, and according to the revised plan approved by the superior.
Job responsibilities of the repairman Article 9 Job responsibilities:
1, familiar with the working principle knowledge of analog circuits, digital circuits and other circuits;
2. According to the actual training situation, compile and sort out relevant technical materials, handouts and other documents;
3. Have a certain understanding of data recovery technology, and be able to recover data damage of storage media such as hard disk, USB flash drive and mobile phone;
4. Familiar with computer software and hardware, and have a basic understanding of circuit boards, components and troubleshooting tools;
5. Have certain training and teaching experience and be able to carry out teaching work with the help of digital cloud platform;
6. Have good expression and communication skills, obey work arrangements, and be able to travel for a short time;
7. Accept and complete the temporary work assigned by the company on time;
8. Properly carry out pre-research on cutting-edge technologies in the industry.
Job requirements:
1, college degree or above.
2. Major in electronic information engineering and applied electronic technology.
3. Be able to independently edit and sort out technical data related to electronic circuits;
5. Have certain training or teaching experience in vocational colleges;
6. Obey the work arrangement and have the spirit of teamwork;
7. Experience in chip maintenance and data recovery of electronic products is preferred.
Job responsibilities of repairman 10 1, responsible for daily maintenance, overhaul and troubleshooting of electrical equipment;
2, do a good job of daily equipment patrol inspection, find problems in time, deal with hidden dangers to make the equipment always in good condition;
3, do a good job of electrical equipment maintenance, maintenance, reduce factory downtime and equipment damage, scrap;
4. Put forward suggestions to reduce consumption according to the consumption of spare parts, and gradually reduce the consumption of spare parts;
5. Submit the spare parts requisition according to the inventory situation, and be responsible for the acceptance of spare parts and the submission of emergency purchased spare parts.
6. Participate in overhaul, minor repair, emergency repair and technical transformation of electrical equipment;
7. Complete all tasks on time, with good quality and quantity, and make records and reports;
8. Carry out the principle of "compulsory maintenance and good maintenance", conduct civilized maintenance, and be responsible for the safety status of the working environment, safety facilities, equipment and instruments in the workplace. The maintenance site should be "cleared after work";
9, after the maintenance work, timely explain the maintenance completion to operators, cooperate with operators to do a good job of inspection and acceptance of maintenance equipment, and ensure that the equipment is put into operation on time;
10, abide by the rules and regulations and labor discipline of the group company and the power plant;
1 1, strictly abide by the electric power safety work regulations, carry out the policy of "safety first", strengthen safety ideological education, and organize the implementation of safety technical measures;
12. Complete other tasks assigned by superiors.
Job responsibilities of repairman 1 1 Description of responsibilities:
1, responsible for formulating safety team and economic goals and organizing their implementation, organizing safety team's study and safety activities on a regular basis, and formulating perfect accident prevention measures.
2. Attend the morning meeting of the department normally, accept the work arrangement of the department and professional leaders, rationally allocate work items and supervise the implementation of team members, dispatch team members at any time, and organize equipment repair.
3, downtime maintenance and equipment overhaul plan, and organize their implementation.
4, the technical innovation and rationalization suggestions put forward by the staff of this class, timely report.
5. Organize on-the-job technical training of this class.
Requirements:
1, healthy, college degree or above.
At least 2.6 years working experience in boiler specialty in thermal power plant. At least 3 years working experience in maintenance professional management position, familiar with technical standards of boiler equipment maintenance in power plant;
3. Professional and technical qualifications above assistant engineer are preferred;
4, understand the electric power production standards, regulations and systems, have strong organization, management and coordination ability;
5. Good practical experience and high maintenance skills in the installation of boiler equipment in thermal power plants;
6. Good professional ethics, strong sense of responsibility and dedication; Handsome, generous and decent, proactive and responsible; Good professionalism, pressure resistance and execution;
Responsibilities of repairman: 12 1. Implement the technical standards and management standards of electrical instruments and equipment of the company and departments.
2, according to the maintenance plan to carry out maintenance work, and do a good job of emergency maintenance.
3. Check the equipment on time and record the equipment defects.
4. Arm connection, pre-cooling and mooring shall be carried out during ship unloading.
4. Responsible for cleaning and keeping the work area clean.
5. Report to the immediate supervisor and provide information support for his decision-making.
6, complete other work arranged by the monitor.
Job responsibilities of repairman 13 1. Responsible for the maintenance and repair of the equipment under the jurisdiction of the whole work area, and responsible for the coordinated handling and emergency repair of accidents.
2. Ensure the safety and integrity of maintenance tools and test instruments, and stand by at any time in case of accidents to ensure the normal operation of equipment.
3. Keep records in the maintenance process, and report the supplement of spare parts, tools and instruments of relevant equipment in time.
4. All operations must fill in the working ticket, and take organizational and technical measures to ensure safety. Illegal command and operation are not allowed.
5. Do a good job in preventive maintenance of the equipment under the jurisdiction of the work area, make annual and monthly maintenance plans according to its maintenance cycle, and do regular electrical tests.
6. Complete other tasks assigned by the leaders.
Job responsibilities of repairman 14 1. Hold regular maintenance meetings to convey the recent tasks, summarize the deficiencies in the previous work, and put forward new prospects and suggestions.
2. Lead all staff to carry out their work and reasonably allocate personnel.
3, responsible for the professional external contact and coordination, and cooperate with the manufacturer's technical transformation and rectification work.
4. Be responsible for the communication and implementation of relevant provisions in the Regulations on Technical Management of Electric Power Industry, Regulations on Safety Work in Electric Power Industry, Regulations on Adjustment of Production Accidents in Electric Power Industry, Regulations on Safety and Technical Supervision of Pressure Vessels and Regulations on Fire Protection.
5, as and guide the professional boiler ontology and auxiliary equipment overhaul, minor repairs, maintenance, testing, acceptance, comprehensive balance of quality and progress, put forward corresponding measures.
6. Aiming at the weak links of boiler auxiliary equipment, pipelines and valves, preventive measures and improvement schemes are put forward.
7, participate in the preparation of boiler ontology, auxiliary machinery, pipeline valve maintenance construction scheme, formulate technical measures and safety measures, write a technical summary report.
8, according to the construction plan, the preparation of boiler major and minor repairs budget.
9, understand the boiler auxiliary equipment assembly drawing and can draw more complex parts processing drawing.
10. Analyze the causes of many defects in the heating surface of the boiler and formulate technical improvement measures.
The repairman's duty is 15 1. According to the principle of division of labor, specifically handle the equipment overhaul and maintenance of each power station.
2. Assist the deputy chief engineer to establish and improve the management of technical data and technical files of each power station.
3. Assist the deputy chief engineer to be responsible for the maintenance, repair, regular overhaul and temporary emergency repair of equipment in various power stations, and put forward corresponding management methods and assessment methods.
4. Be fully responsible for the implementation of the plan of each power station and the safety production assessment.
5. Assist the deputy chief engineer in technical training and safety regulations training for each power station.
6. Complete other tasks assigned by the leaders.
The responsibility of the repairman is 16 1. The first person in charge of safety production in the electrical maintenance class is responsible for the safety production management in the whole process of the electrical maintenance class.
2, establish the idea of serving the team wholeheartedly, exemplary implementation of job responsibilities, power safety work procedures and various rules and regulations, take the lead in electrical construction, maintenance and emergency repair; Connecting the preceding with the following, obeying management, assigning daily tasks in place, and implementing responsibilities to individuals, and completing tasks assigned by superior leaders in time.
3. Strengthen the construction of spiritual civilization of the team, unite and care for the workers; Assist superior leaders to do a good job in team management, ideological education and technical training; Guide and supervise the safety study of the class staff; Explore the ability of each team member as much as possible, give full play to the characteristics of each team member, improve the sense of responsibility and enthusiasm for work, and make the team full of vitality and cohesion.
4. Preside over the pre-shift meeting and post-shift meeting, and issue daily work safety and technical requirements according to the production tasks assigned by the production plan of the center.
5. Organize weekly safety day activities, learn safety work regulations and related accident reports in time, learn lessons and take preventive measures to prevent the recurrence of previous accidents.
6, according to the construction content of the team's production activities on-site supervision or command, found that the problem is corrected in time; Coordinate all aspects, rationally allocate all kinds of resources, control the safety and quality progress of the project, and ensure the smooth completion of the project; Ensure that production operation standards and safety technical operation specifications are implemented.
7. Responsible for the procurement, receipt and return management of the team's building materials; Control the use of materials in the construction process.
8, responsible for the team's daily work plan and summary work, do a good job of team quantities, related indicators and other completion of the summary and statistics, and timely report.
9, according to the company rules and regulations, serious labor discipline and attendance system, and make the corresponding assessment; Ensure fairness, impartiality and openness.
10, responsible for the supervision and daily maintenance management of team equipment, tools and instruments, and supervising and checking the correct use of labor protection articles by team members.
1 1, responsible for the team's engineering quality standards, work instructions and technical management system. Establish and supervise the implementation.
12. The anomalies, obstacles, attempts and accidents in the work of this team should be registered and reported in time to protect the scene of the accident, organize and analyze the reasons, sum up lessons and implement improvement measures.
13, organize team members to do technical disclosure and safety measures disclosure of various engineering tasks in advance, and make records.
14, responsible for the supervision and management team to do a good job of duty in the office, instrument room and environmental sanitation, and organize regular inspections every month.
15, complete other tasks assigned by superior leaders.
Responsibilities of repairman: 17 1. Responsible for the maintenance class, and bear the corresponding safety responsibilities.
2. Be responsible for the implementation of safety rules and regulations of all production units in the work area, and often go deep into the site and check the safety measures such as "two votes, two systems" and equipment defect management system.
3. Establish and improve the necessary equipment maintenance ledger.
4. Be responsible for the regular rating and maintenance of equipment, ensure the equipment intact rate, guarantee the maintenance quality, shorten the maintenance time, reduce the number of temporary repairs and ensure the safety in production.
5. Actively organize team members to participate in emergency repair and emergency defect treatment.
6. Complete other tasks assigned by the leaders.
Job responsibilities of repairman 18 Job responsibilities:
1, the maintenance of the attendant during the operation of the ship unloader, to ensure the safe and normal operation of the ship unloader;
2. Replacement and debugging of wire rope and grab;
3. Adjustment and maintenance of brakes;
4. Inspection, maintenance and repair of the feed belt;
5. Regular inspection and maintenance of the funnel mechanism;
6. Several major institutions (rollers, bearings, etc.). ) inspection and maintenance;
7. Be responsible for the leakage rectification of ship unloader room, shore crane room, belt conveyor and sanitary area of 3000-ton general cargo wharf, as well as the paint repair of personal sanitary area.
Application requirements:
1, high school or technical secondary school or above;
2. Have professional knowledge of power plant terminal or bulk cargo terminal; Familiar with the mechanical working principle, hydraulic system and maintenance method of bridge grab ship unloader and belt conveyor, and have rich experience in fault handling; Or other mechanical maintenance experience;
;