Effective above dew point.
Compression dehumidification
Humid air is compressed and cooled to separate water from it.
Effective in small air volume, but not suitable for large air volume.
Solid adsorption dehumidification
Water is adsorbed on the solid hygroscopic agent by capillary action.
The dew point can be reduced, but the equipment with large adsorption area will become larger.
Liquid absorption dehumidification
Water is absorbed by the spray of lithium chloride aqueous solution.
The dew point can be reduced to around, but the equipment is large and the absorption liquid must be replaced.
Dehumidification of adsorption wheel
The sheet impregnated with moisture absorbent is processed into a honeycomb wheel and ventilated.
Its dehumidification structure is simple, and the dew point can reach below -70℃ after special preparation.
Suitable dehumidification range
Principle of air treatment
Provide dry air continuously. Air treatment is a high-performance dry dehumidifier with a honeycomb dehumidifier wheel.
When the air-treated honeycomb runner rotates, the action of moisture absorption and regeneration is repeated continuously without affecting the airflow, and ultra-low dew point dry air is continuously provided.
Honeycomb runner
The runner of Aobo dehumidifier adopts Japanese NICHIAS high-efficiency ceramic silica gel runner. Ensure that the dehumidifier runner passes through a large air volume and is firm without dust removal. Japan NICHIAS high-efficiency ceramic silica gel wheel is made of ceramic as the base material and silica gel as the raw material, which is mixed and sintered into a honeycomb cylinder and precision cut. The whole wheel is an efficient dehumidifier, which can handle 100% wet air without falling off or deformation. The service life can reach more than 10 years, and it can be cleaned many times, with long service life.
Basic structure of air treatment
Dehumidification principle of air treatment
The system adopts a dehumidifying wheel with honeycomb structure. As shown in the figure, the driving motor rotates the dehumidifying wheel 8~ 18 times per hour, and the actions of moisture absorption and regeneration are repeated continuously, thus providing dry air.
The flow channel is divided into a moisture absorption zone and a regeneration zone. After the moisture in the air is removed in the moisture absorption zone, the blower sends dry air into the room.
When the wheel with absorbed water moves to the regeneration zone, the regeneration air (warm air) sent from the opposite direction will drive away the water and make the wheel continue to work.
Regenerated air heating methods are divided into steam, natural gas, gas, gas, fuel oil, electricity and other devices.
Due to the special performance of Japanese NICHIAS high-efficiency ceramic silica gel wheel and zeolite wheel, Aobo series dehumidifiers can continuously dehumidify under large air volume and meet the requirements of extremely low moisture content. After matching, the moisture content of the treated air can be lower than 0.0007g/kg.
If you want to keep the temperature of dry air stable, you can cool or heat the air at the outlet of the dehumidifier by installing air conditioning equipment or heaters.
Characteristics of air treatment
In the process of product production, the troubles caused by moisture have been bothering human beings. When the solid adsorbent is used for moisture absorption, the regeneration and dehydration of the adsorbent after moisture absorption are carried out simultaneously, so the solid adsorbent can be recycled and the whole moisture absorption work can be carried out continuously. It overcomes the shortcomings that static solid adsorption can not continuously dehumidify and refrigeration condensation dehumidification can not do anything under low temperature and low humidity conditions. It can play the characteristics of continuous stability and large dehumidification under low temperature and low humidity. The rotary dehumidifier of Aobo Company is developed by applying this advanced technology, and it has special functions that genius cannot achieve. Compared with other dehumidification methods, the rotary dehumidifier has its unique characteristics;
Dry air with ultra-low humidity can be simply obtained.
It can continuously provide ultra-low humidity dry air with dew point below 6℃ which can not be achieved by cooling and dehumidification, and the cost is low.
Simple operation and maintenance.
The structure is simple, the driving part is simple, and dry air can be obtained only by the operation of the dehumidifying wheel, the regenerative heater and the blower, so the operation is very simple. In addition, it belongs to the dry dehumidification type, does not need to supplement moisture absorbent, and has convenient maintenance and low operation and maintenance cost.
Excellent durability.
In a clean air environment, the performance of the dehumidifying runner will hardly decline or deteriorate, and it can be competent for continuous operation for many years.
There are all kinds of machines.
From the standard type for general use to the low humidity type that can obtain ultra-low humidity dry air, our company has a complete range of machines, which are suitable for all kinds of use conditions.
Pollution-free green machine Because ceramic silicone rubber and zeolite runner are non-toxic and odorless green moisture absorbents, dehumidifiers are safe, environmentally friendly, clean, free of floating dust and corrosion, and can also sterilize, especially suitable for pharmaceutical, food, biochemical and other industries.
Choose me, because I am a professional! Cool the air below the dew point, and then remove the condensed water.
Effective above dew point.
Compression dehumidification
Humid air is compressed and cooled to separate water from it.
Effective in small air volume, but not suitable for large air volume.
Solid adsorption dehumidification
Water is adsorbed on the solid hygroscopic agent by capillary action.
The dew point can be reduced, but the equipment with large adsorption area will become larger.
Liquid absorption dehumidification
Water is absorbed by the spray of lithium chloride aqueous solution.
The dew point can be reduced to around, but the equipment is large and the absorption liquid must be replaced.
Dehumidification of adsorption wheel
The sheet impregnated with moisture absorbent is processed into a honeycomb wheel and ventilated.
Its dehumidification structure is simple, and the dew point can reach below -70℃ after special preparation.
Suitable dehumidification range
Principle of air treatment
Provide dry air continuously. Air treatment is a high-performance dry dehumidifier with a honeycomb dehumidifier wheel.
When the air-treated honeycomb runner rotates, the action of moisture absorption and regeneration is repeated continuously without affecting the airflow, and ultra-low dew point dry air is continuously provided.
Honeycomb runner
The runner of Aobo dehumidifier adopts Japanese NICHIAS high-efficiency ceramic silica gel runner. Ensure that the dehumidifier runner passes through a large air volume and is firm without dust removal. Japan NICHIAS high-efficiency ceramic silica gel wheel is made of ceramic as the base material and silica gel as the raw material, which is mixed and sintered into a honeycomb cylinder and precision cut. The whole wheel is an efficient dehumidifier, which can handle 100% wet air without falling off or deformation. The service life can reach more than 10 years, and it can be cleaned many times, with long service life.
Basic structure of air treatment
Dehumidification principle of air treatment
The system adopts a dehumidifying wheel with honeycomb structure. As shown in the figure, the driving motor rotates the dehumidifying wheel 8~ 18 times per hour, and the actions of moisture absorption and regeneration are repeated continuously, thus providing dry air.
The flow channel is divided into a moisture absorption zone and a regeneration zone. After the moisture in the air is removed in the moisture absorption zone, the blower sends dry air into the room.
When the wheel with absorbed water moves to the regeneration zone, the regeneration air (warm air) sent from the opposite direction will drive away the water and make the wheel continue to work.
Regenerated air heating methods are divided into steam, natural gas, gas, gas, fuel oil, electricity and other devices.
Due to the special performance of Japanese NICHIAS high-efficiency ceramic silica gel wheel and zeolite wheel, Aobo series dehumidifiers can continuously dehumidify under large air volume and meet the requirements of extremely low moisture content. After matching, the moisture content of the treated air can be lower than 0.0007g/kg.
If you want to keep the temperature of dry air stable, you can cool or heat the air at the outlet of the dehumidifier by installing air conditioning equipment or heaters.
Characteristics of air treatment
In the process of product production, the troubles caused by moisture have been bothering human beings. When the solid adsorbent is used for moisture absorption, the regeneration and dehydration of the adsorbent after moisture absorption are carried out simultaneously, so the solid adsorbent can be recycled and the whole moisture absorption work can be carried out continuously. It overcomes the shortcomings that static solid adsorption can not continuously dehumidify and refrigeration condensation dehumidification can not do anything under low temperature and low humidity conditions. It can play the characteristics of continuous stability and large dehumidification under low temperature and low humidity. The rotary dehumidifier of Aobo Company is developed by applying this advanced technology, and it has special functions that genius cannot achieve. Compared with other dehumidification methods, the rotary dehumidifier has its unique characteristics;
Dry air with ultra-low humidity can be simply obtained.
It can continuously provide ultra-low humidity dry air with dew point below 6℃ which can not be achieved by cooling and dehumidification, and the cost is low.
Simple operation and maintenance.
The structure is simple, the driving part is simple, and dry air can be obtained only by the operation of the dehumidifying wheel, the regenerative heater and the blower, so the operation is very simple. In addition, it belongs to the dry dehumidification type, does not need to supplement moisture absorbent, and has convenient maintenance and low operation and maintenance cost.
Excellent durability.
In a clean air environment, the performance of the dehumidifying runner will hardly decline or deteriorate, and it can be competent for continuous operation for many years.
There are all kinds of machines.
From the standard type for general use to the low humidity type that can obtain ultra-low humidity dry air, our company has a complete range of machines, which are suitable for all kinds of use conditions.
Pollution-free green machine Because ceramic silicone rubber and zeolite runner are non-toxic and odorless green moisture absorbents, dehumidifiers are safe, environmentally friendly, clean, free of floating dust and corrosion, and can also sterilize, especially suitable for pharmaceutical, food, biochemical and other industries.
Choose me, because I am a professional!