One, consider whether the material has special processing conditions. Such as the temperature can reach how many degrees, some precious herbs and other drying temperature can not exceed 60 ℃, therefore, this type of only choose microwave vacuum drying equipment. Part of the material for high-temperature sintering, this type is required to customize, subject to coordination between the two sides.
Two, consider the yield of material processing. If it is a small experimental type, the output is very low, you can consider using the cabinet microwave drying equipment; and the production of large demand, may need to be used in continuous production, we need to use the tunnel microwave equipment.
Three, consider the initial moisture from the material drying as well as the end of the moisture content. If the initial moisture content is too high, more than 80%, you need to add other equipment to do pretreatment, such as hot air drying, so that the moisture reaches a certain value before microwave drying; if you need to remove the moisture is relatively small, and the output is not a lot, it is recommended that the use of cabinet microwave drying equipment.
Four, consider whether the size of the material volume in line with the cavity. If part of the processing material is large, ordinary equipment may not meet the requirements, the need for customized, you can first propose to the microwave equipment manufacturers, timely adjustment program.
Fifth, consider the customer's plant and the original equipment splicing. Part of the customer's plant may not be large enough, you may need to use the cabinet microwave equipment or customized tunnel microwave equipment, so as to meet the needs of the plant; at the same time, the microwave equipment may need to be spliced into the original equipment, processing, which is also needed through bilateral negotiations, the customer to provide the requirements of the manufacturer to provide the program, and then reach an agreement.
(Nanjing Kimberly-Clark Microwave Equipment Co., Ltd. welcomes you to leave a message to discuss)