Since my work, I have been engaged in first-line electrician work, over the years, I strictly require themselves, dedicated. Mainly from the following aspects to summarize:
First, ideological and political learning and democratic management
I seriously study Marxism-Leninism, Mao Zedong Thought, Deng Xiaoping Theory, the spirit of the three Represents to guide production practice. Actively participate in a variety of democratic activities, participate in democratic management, plant as a home, work hard, do a good job as a production line electrician should do the duty.
Second, production safety
1, the implementation of the spirit of the higher documents, to improve the safety of workers with electricity awareness, enhance the sense of responsibility of workers.
2, the implementation of the perfect safety of electricity organization system, sound safety management rules and regulations.
3, to strengthen the team electricity safety management, consolidate the safety foundation.
4, a ensure, electricity users to ensure their own safety and the safety of others.
Third, training and learning
Over the years, I actively participate in a variety of learning and training, and strive to learn the basic knowledge of electrician training, knowledge of the power supply system, line installations, lighting installations, grounding devices, the operation and maintenance of transformers, motor maintenance and repair, machine tool electrical control lines, PLC control and other related knowledge system. Each study, I have learned some new theories, and used to guide the work of the practice, applied to the work of the factory power supply system, control system to improve, was unanimously praised.
Fourth, in the energy-saving aspects of energy saving, I actively use the knowledge I have learned, for the factory's energy saving aspects of a lot of contributions. Such as the factory line transformation, for the factory to save more than ten thousand degrees of electricity per year. At the same time, the factory's old equipment, electrical transformation, so that some of the old equipment rejuvenation.
Fifth, the practice of production in the production of practical aspects, such as: the motor to find electrical faults and troubleshooting examples.
Six, electrical:
1, check whether the insulation of the lead wire is intact, whether the motor is overheating, check whether the wiring is in accordance with the provisions of the nameplate, the windings and the first and last end of the electricity is not correct;
2, measurement of insulation resistance and DC resistance measurements to find out whether the insulation is damaged. Winding whether there is a broken circuit, short circuit and grounding and other phenomena;
3, power check in the above checks at the end of the discovery of the problem, you can directly energize the test, with a three-phase voltage regulator to start applying a lower voltage, and then gradually rise to the rated voltage. Using the above inspection methods, for the factory more than one motor to find faults, and will be repaired. Summarize the phenomenon of various failures and solutions in a timely manner, and recorded, used to guide practice, but also to improve their business level.
In short, in production practice to do the rules and regulations on the wall, strictly according to the rules and regulations. Over the years, the plant did not occur a life safety failure caused by electrical, and the plant through a number of technological transformation, the operation of the equipment is more scientific and rationalized.
2, 2017 maintenance electrician work summaryI have been working since January 20XX, so far has been in the **** system engaged in electrician operations. Among them, from January 20XX to June 20XX in *** engaged in **** machinery power supply and electrical equipment and facilities maintenance; June 20XX to June 20XX in *** engaged in power supply and electrical equipment and facilities maintenance operations; June 20XX to the present has been engaged in electrician operations in ****. 20XX year to obtain the professional qualification certificate of senior electrician.
Over the years, in the master, colleagues and leaders to help guide, and through uninterrupted learning and work practice, so that their professional knowledge and maintenance technology level has improved greatly. Better to complete the work of this post and make some achievements, now the work of the past few years is summarized as follows:
First, active work, conscientiously complete the work tasks assigned by the leadership
*** The company is mainly engaged in geotechnical engineering construction of a professional team, whose construction is characterized by the large capacity of the electrical equipment, electrical equipment, construction of short construction period, open-air operation. The electrician operator undertakes the selection, arrangement, layout, installation, inspection and patrol, maintenance, removal and electrical maintenance of electrical equipment and facilities after construction.
Through years of electrical construction work, I can strictly follow the construction of electricity organization design and "construction site temporary electricity safety technical specifications" requirements, successfully complete the large-scale construction project electrical equipment selection, layout, layout, installation, inspection and maintenance and demolition of work, and participated in a number of projects in the construction site of the construction site of temporary electricity construction organization design, so that all construction projects to meet the national temporary electricity safety technical standards. National safety technical standards for temporary electricity. Such as: *** project, *** project and so on. Construction, active work, strengthen the site construction of electricity management and safety education, seriously implement the post operating procedures, comply with the electricity safety management system, the construction projects have not participated in any electrical injuries and electrical equipment accidents, creating a better social and economic benefits.
Second, focus on continuous learning, and strive to improve their professional knowledge and business level
I participate in the work, and constantly participate in the school, the community, as well as through self-study way to learn the electrical profession, building construction and safety technology knowledge, and constantly improve their professional knowledge and business level.
The main technical studies and training are:
1, September 20XX-July 20XX *** study;
2, November 20XX-December 20XX, *** study;
Through continuous learning to make himself mastered the "foundation of electrician", "electrical engineering", "power supply in factories", "temporary use of electricity safety technical specification", "construction site", "temporary use of electricity", "temporary use of electricity", "temporary use of electricity", "temporary use of electricity", "temporary use of electricity", "temporary use of electricity", "temporary use of electricity", "temporary use of electricity", "temporary use of electricity", "temporary use of electricity". Temporary Electricity Safety Technical Specification", "building construction safety technology", "building construction safety management" and other professional knowledge, so that their safety knowledge and awareness has been greatly improved, and constantly use their knowledge and technology for production and construction.
Geotechnical construction due to the different types of pile foundation, for the construction of machinery and equipment is also a variety of different, like the construction of ordinary mud retaining wall drilling and grouting pile drilling rig, long spiral drilling and grouting pile drilling rigs, prefabricated piles, hydraulic machine; used for concrete mixing and conveying mixer, batching machine, conveyor pumps; used for welding of reinforcing bars with butt welder, welder, and so on, to do a good job in the maintenance of these machines and electrical Maintenance and repair of these machines is the responsibility of electricians. Pile foundation construction is a coherent process, if the drilling rig electrical equipment in the filling process problems, must be repaired as soon as possible to ensure that the drilling hole in the concrete before the initial set of filling is completed. Through years of study and practice, can be judged in a very short period of time to find the source of failure and overhaul intact, over the years to repair a large number of construction electrical equipment, to protect the normal construction of geotechnical engineering projects.
Third, focus on technological innovation and transformation, safety and energy efficiency
In recent years, the company continues to encourage technicians to technical innovation in production and technology. According to the "construction site temporary use of electricity safety technical specifications" in the "AC welding machinery should be equipped with anti-secondary side of the electric shock protector provisions", I put forward a proposal to the company at the end of 20XX, the company quickly replied and promoted the safety monitoring station to supervise the manufacture of welding welding machine welding switch box, not only the implementation of the "temporary use of electricity on construction sites," the standard, in the safe use of electricity, and in the safe use of electricity, the company has been able to achieve safety and energy-saving results. Not only the implementation of the "construction site temporary use of electricity safety specifications" standard, in the safe use of electricity, power saving has also achieved great results. During the construction, the electrician's work team constantly carries out technical innovation and transformation of the electrical system of the equipment. Like in August 20XX, in the **** project, our company in 20XX purchased and is using **** equipment distribution box electrical system is old, contactor static and dynamic contacts are often damaged, our electrician team after research, find out the problem, in the construction gap on the long screw drilling rig distribution box for a comprehensive update and transformation, so that the equipment startup and operation is normal, the electrical failure maintenance rate is reduced, the construction efficiency has been greatly improved, to ensure that the project in the project in the project of the technical norms, the electrical energy saving is also a great effect. This has greatly improved the efficiency of construction and ensured the smooth completion of the project within the planned construction period. At the end of each project construction, the company will organize electricians and technicians to carry out maintenance of electrical equipment and electrical facilities. Over the years, I have participated in the maintenance of many electrical equipments and electrical facilities, straightened out the electrical lines of the equipments, and replaced the unqualified electrical facilities. For the company's safe production has made a positive contribution.
Fourth, actively teach the learned technology, without reservation, the learned technology and production practice in the accumulation of knowledge and skills, taught to new workers.
In the usual work, I often with other workers to technical discussions and exchanges, the knowledge they have learned with everyone **** enjoy, and from others to learn their own do not understand the knowledge, to realize *** with progress. In my teaching guidance, **** the company has two electricians, access to obtain a senior job qualification, able to independently complete the electrical maintenance tasks given by the superiors, there are three electricians access to obtain an intermediate job qualification, able to basically complete the electrical maintenance tasks, and effectively alleviate the shortage of electricians in the construction project of the tense situation.
Fifth, to strengthen employee safety and energy saving education, and constantly improve employee safety and energy saving awareness
In recent years, in doing their jobs at the same time, I continue to strengthen employee safety and energy saving education, make full use of spare time into the construction team, dormitory area to explain the safe use of electricity and energy saving knowledge, organized and carried out the "construction safety knowledge of electricity". "Construction Safety Electricity Quiz" and "Energy Saving Week" publicity. So that the unit of the majority of workers to improve the knowledge of safe use of electricity, and consciously save electricity.
Six, correct attitude, work hard and actively
Over the years, in my heart, bearing in mind the "safety first, hard work" firm conviction, I am a *** Party member, is an electrician maintenance of senior technical workers, the work can not be a little slack and sloppy, only to conscientiously comply with the implementation of safety regulations and rules. Production rules and regulations, tireless learning and enterprising, down-to-earth work, in order to put an end to electrical accidents, to achieve safe construction, in order to be worthy of the party organization and the leadership of my cultivation and education over the years.
All of these honors are the incentive and encouragement of my work, I will continue to strengthen their own learning, and constantly make up for the shortcomings, and only then can keep up with the pace of the times and steadily move forward, but also to better serve the unit, serve the community.
3, 2017 maintenance electrician personal work summarySince engaging in this work, I have been constantly strengthening their own cultivation, and strive to improve the level of ideology and morality, seriously deepen the learning of various cultural and professional knowledge, and constantly explore new knowledge, forge ahead, and actively carry out the work within the scope of the intelligence, complete fulfillment of a technician's duties, and play a good role as an exemplary leader. Act as an exemplary role model. Actively participate in technical exchanges and scientific and technological innovation activities, the earth to do a good job in the role of transmission, help and lead, and fully complete the tasks and indicators issued by the higher levels, in the production and development of the company has played a due role. I now summarize my professional and technical work since my tenure as follows:
First, consciously strengthen the theoretical study, and strive to improve personal qualities
No firm and true political direction, there will be no positive guiding ideology. In order to continuously improve their political and ideological quality, over the past few years I have been very concerned about national events, pay attention to the situation at home and abroad, analyze the impact of changes in the situation on the enterprise, and put this idea into practice to the production process, to ensure that they are always in line with the party and the enterprise in thought and action. At the same time, we also bring this kind of thinking into our work and study, and constantly pursue our own progress. Some people say: a person to be successful, you have to be a person first, this is reasonable. That is to say: a person's career to get success, must first learn how to do! In particular, we do this very technical work, see things to be attentive, do things to be dedicated, learning to be modest. Can not afford to be sloppy and mistakes. All the first work attitude should be correct, to have a good professionalism, to work seriously and responsibly, to obey the leadership of the arrangements, and listen to others with an open mind and suggestions, to unite colleagues, courteous to others, service enthusiasm.
Second, correct work attitude, take the lead
Since entering the company to participate in the work of the beginning, I have engaged in all the electromechanical affairs, including all the infrastructure period of safety and quality supervision and inspection. I am well aware of the importance of electromechanical management work during the construction period, especially containing most of the invisible electrical infrastructure and engineering, to monitor and inspect at any time, found that the problem must be solved, and must not be haphazardly done, or else there will be endless and then can not be eradicated, which is placed in front of the machine we make electromechanical management is a test and responsibility. As I am an electromechanical shift manager and an electrician technician, the responsibility and burden I am duty-bound. Therefore, in the usual work, I not only require their own team members in the supervision and inspection, to be serious and careful, to do meticulous, and they also know that the iron must also be their own hard reasoning. I made some of these strict requirements for myself: a dirty, tired, bitter and dangerous work in the encounter in front of the workers to do, and to do more than the workers, under the force; two in the encounter of technical problems is to step forward, do their best to overcome technical difficulties; I always insist on doing my best to do everything in the interests of the company. Including the completion of the production process, sometimes it is time to grab the time to deal with dozens of small and large electrical equipment failures, for the company to win the valuable production time for the company to lay a solid foundation for the development of the company to create economic benefits and social benefits provide a strong backing and strong protection. Third, I ask myself to be able to take responsibility; I think that since I am a technician, then in the business level and many other aspects should be stronger than the average worker. In the company assigned tasks, in general workers to complete the task is more difficult, they should take the initiative to undertake, not to shirk with the workers, to make the teacher style, the courage to take on the heavy burden. Normally, I not only ask myself to do so, but in practice, I also do according to these requirements. So my performance of these also y by the company's leadership and workers unanimous praise, played my role as a technician should be, set up a technician should be a good image.
Third, to strengthen business learning, improve technical level
Long to old, can not learn this sentence is my motto. Science and technology continues to develop today, a day without learning, will be backward. Especially this piece of electrical automation, no one can 100% of what are proficient in the end, it is constantly in the development in the update, and computer software, as every day in the update, when in the development. Maybe you know it yesterday, after two days it has changed, there are more advanced things into it. So I usually as long as I have time to read more professional books. Over the past year, I have collected a large number of new professional books and materials, and constantly enrich themselves, and constantly master new knowledge. For example, "electrical design and drawing", "electronic technology", "modern frequency conversion technology", "DC applications in industry" and so on, in the process of learning this knowledge, I learned a lot of new knowledge, such as: PLC programming and control principles, ABB frequency converter setup and control principles, SIPMOS high-power bi-directional thyristor control principles and so on so that I do benefit a lot! Not only broaden my knowledge, but also to a large extent to improve my technical level, but also make me to a higher level of theoretical and technical knowledge of the study has generated a strong interest.
4, 2017 maintenance electrician annual work summary2017 busy and orderly work in the past, looking back on this year's work, I think there are two main aspects:
First, the development of their own work guidelines:
1, to do every job in accordance with the safety norms process operation, to put an end to the safety accidents;
2, every month to store Inspection at least once a month to the store inspection of the problems found in the inspection of timely communication with the management of the store, to be able to solve the problem on-site to be a direct solution to the problems raised by the store in a timely manner to the departmental leadership feedback, in the shortest possible time the need to do a good job, found in advance to quickly solve the problem before it occurs;
3, the adjustment of the store large circuit remodeling work, well in advance of the plan to do a good job in preparing materials, and resolutely do not drag the store remodeling after the work. Determined not to drag the legs of the store transformation, to ensure high quality and efficient completion of the work;
4, the store's unexpected power facilities, first communicated on the phone, the initial estimate of what place the problem, leading the relevant personnel to prepare the relevant objects and tools, in order to arrive at the scene can quickly troubleshooting;
5, adhere to the principle of savings: the store damaged items can be repaired Do your best to repair the damaged items can be repaired, do not replace the new, really need to replace the choice of quality and inexpensive, for the reuse of a variety of materials (such as plugs, etc.) to collect and organize in order to use again;
Second, the past year's main work:
1, April is the main work of Tianbang Supermarket's opening and the adjustment of the Haidan supermarket work, the two work in a month, fewer people, Time is tight, high demand, their own initiative to take the lead, and equipment colleagues carefully study, strict layout, standardized construction, to ensure that the opening of the Tianbang Supermarket as well as the adjustment of the Haidan Supermarket completed on time and quality;
2, the month of the main work is the Xin'an Shopping Plaza of the large electric decoration and opening. Due to the time constraints, home appliances require electricity and more places, but also involves the brand and the layout of the booth construction issues. In accordance with the company's requirements, as well as the work process, overtime, rigorous construction, so that all the electrical facilities successfully installed, a trial success for the Xinan shopping plaza home appliances on May 1, the smooth opening of the equipment to prepare for the work;
3, June to September is mainly the main store east building renovation and adjustment and Zhuo Ting supermarket opening preparations. The decoration of the east building of the General Store is the largest project this year, involving more facilities, heavy workload. The replacement of escalators, the adjustment of electric circuits, the decoration of the ceiling, the follow-up of the decoration of each specialized hall, and the layout and follow-up of the electricity of the specialized halls all need equipment to do. Therefore, these three months basically every day to work overtime, but I was not tired, workload intimidated, carry forward the spirit of Zhongze not afraid of hard work and fatigue, work proactively, conscientiously and responsibly, clear thinking to successfully complete the work of the company, for the head office of the East Building renovation work to make their own contribution. in September in the East Building renovation work, and a new store Zhuo Ting supermarket preparatory work. The original equipment department staff is not enough, and close to the Mid-Autumn Festival, each store is also relatively busy there is no personnel can be transferred. In the face of the work of our equipment, a group of people did not fear, in strict accordance with the requirements of the company in a timely manner to prepare for the opening of the required equipment. The need for electricity facilities, from the total lighting to each need to use a socket, the installation of UPS, the leaseholder's electricity construction, all to do in place in detail. After unremitting efforts, the successful completion of the East Building renovation and Zhuo Ting supermarket opening related work.
4, September after the main work, in addition to the daily work of the store, the store needs part of the maintenance work, is to advance the stores need to carry out the winter warming of the water pipe statistical summary, and all the stores need to be warmed to deal with all the winter for the water pipe is ready for another major task is the organization of idle equipment. Idle shelving equipment and ancillary accessories all centralized to the equipment in the Liu Hua Po warehouse, each piece is categorized and organized for future use.
In the new year, continue to carry forward the spirit of Zhongze is not afraid of hard work, not afraid of tired, and strictly abide by the safety operation norms and the company's various management regulations, under the guidance of the leadership of the timely, safe, efficient and economical completion of the work.
? 5, 2017 maintenance electrician work summaryI joined the work in 1966, 66 to 79 years in the industrial and mining enterprises, 80 years transferred to the current service unit xxxx school work. From when the apprentice to do so far more than forty years has been engaged in maintenance electrician work, 97 years to obtain senior electrician qualification. Over the years in the side of the master colleagues, senior lecturers and leaders of the school electrician to help guide, through self-study and work practice, so that their professional knowledge and maintenance technology level has improved greatly. Better to complete the work of this post and made some achievements, now will be several years of maintenance work is summarized as follows:
First, the electrical line, electromechanical equipment installation and maintenance work.
Our school is an engineering class provincial key secondary schools. Set up a metalwork, plastic mold, CNC and other internship workshops and professional laboratories. Configuration of a large number of advanced teaching, laboratory and internship equipment. Such as: CNC lathe, CNC milling machine, three-dimensional projection imager, plastic injection molding machine, wire cutting and EDM machining and other electromechanical equipment. With the help of professional teachers, we have participated in the installation and debugging of most of the electromechanical equipment, as well as the daily maintenance of electromechanical equipment.
Through years of maintenance work practice to realize: maintenance electrician's duty is to ensure that the school teaching, living lighting and other systems of normal operation. As a maintenance electrician, in addition to the work of the equipment and lines of reasonable installation, good debugging and routine maintenance and inspection, how to be able to quickly identify the cause of the failure, correctly deal with the fault, is to ensure the normal operation of the equipment is an important prerequisite. To achieve rapid judgment; correctly handle the fault of the hard maintenance skills, must do the following:
1, constantly learning new technologies, new knowledge, familiar with new equipment, new appliances.
2, theory-guided practice, in practice, constantly summarize the accumulation of experience, faster troubleshooting.
3, in the process of troubleshooting, take the combination of analysis, detection and judgment, and gradually narrow the scope of the problem.
4, to do a good job of installation and maintenance of assembly line equipment, in addition to having professional knowledge of electricians and excellent maintenance skills, should also have a variety of professional knowledge. Over the past few years to take advantage of the favorable conditions of work in engineering schools, and strive to learn the "mechanical fundamentals", "machining fundamentals", "mechanical equipment installation and maintenance", "equipment control basics" and other courses. Expand knowledge and improve the level of maintenance technology.
Second, the automatic control of electrical equipment and safe operation.
As the school is far from the city, the city water supply is not available, the surrounding area and the lack of water, living, fire water all rely on drilling machine wells to extract groundwater to solve. The whole school **** there are five machine drilling deep wells, an artificial shallow wells, the configuration of five deep water electric pumps, two centrifugal water pumps, five roof tanks. In order to ensure water supply and water conservation, the water supply pipe network is networked and transformed, and automatic control devices such as liquid level and solenoid valves are installed. In order to ensure the safe and reliable operation of the pump motor, in addition to the installation of motor overload, overheating and short-circuit protection, the addition of motor phase-loss protection device. The use of two AC contactor main contacts connected in series to the three-phase circuit, each contactor coil (380v) were connected to the A-B, B-C phase, when the three-phase circuit of any phase of the circuit breaks down, there is a contactor coil discharged and disconnect the motor three-phase power supply to achieve the protection of the motor. Through years of practice, confirmed that this lack of power protection method is simple and safe and reliable.
Third, the transformer capacity expansion work.
With the continuous development of the scale of school teaching, teaching, laboratory and internship equipment, office and living facilities to increase the day to day, the dramatic increase in electricity consumption, the original power transformer overload, the urgent need to increase capacity. Through the whole school electricity facilities electricity consumption statistics, test the maximum power consumption during peak hours. According to the school according to each department's electricity demand and the school's continuous development requirements, to determine the expansion capacity, the development of transformer capacity expansion program, approved by the school leadership. Commissioned by the industry bureau for the design and construction, 06 October 18th expansion project completed and delivered.
Fourth, standby power operation and maintenance
The school is located in the suburbs, with a diesel generator set for emergency power supply. Due to the limitations of the conditions, the generator capacity is small, the utility power outage, self-generated electricity is far from meeting the school's electricity needs. Through investigation and calculation, and according to the daytime to teaching, internship facilities with electricity, the night is mainly lighting power consumption characteristics, to ensure that the important sectors of the electricity, the preparation of self-powered distribution table, scientific and reasonable deployment of power supply, so that the self-generated emergency power supply to reach the best state. Carefully study the construction principles of diesel engines, maintenance technology, make a good record of the operating data of the generator set and daily maintenance work, regular inspection, maintenance and charging of the starting battery. Ensure that the generator set all-weather emergency start-up power supply.
Fifth, the safety of electricity, electricity saving
1, in the maintenance work in strict compliance with safety regulations, the use of qualified electrical products, materials.
2, to strengthen the school dormitory safety management of electricity, participate in the development of student dormitory safety rules of electricity, strictly prohibit the use of high-power electrical appliances in the dormitory, each dormitory circuit installed current-limiting control devices to ensure that the student dormitory electricity safety, to eliminate potential fire hazards.
3, regular inspection of the departments, the system of safe use of electricity, found that hidden security risks, timely rectification.
4, regular annual testing of the building lightning grounding, electrical equipment protection grounding system grounding resistance. The grounding resistance does not meet the standard requirements of the system, the deadline for rectification to meet the standard.
5, electrical appliances installed leakage protection devices, especially for metal workshop welding machine installed two-phase leakage protection air switch.
6, the school's original power overhead lines for a comprehensive optimization and transformation of the overhead line according to the norms of underground paving, to ensure the safety of power supply, so that the campus environment is clean and elegant.
7, according to the school in the middle of the night electricity consumption plummeted, the voltage rises, campus roads, corridors, passages, gates and other places of illumination need to be all night long, and most of the use of incandescent lamps, the use of diodes to lower the voltage method, to solve the places of incandescent lamps short life, replacement and maintenance of the high rate of the problem. And some other places of lighting according to the actual situation using new energy-saving lamps, energy saving.
In short, in many years of maintenance electrician work, they use the technical knowledge learned in the maintenance of the practice of work to do some effective work, with a certain degree of maintenance technology work ability. But there are still some shortcomings such as low cultural level. In the future work, I have to overcome the age of learning more difficult, and strive to learn new technologies, new knowledge, and strive to further improve their technical level.
I carefully recommend