Computer set dual-screen or multi-screen display method is as follows:
One of the hardware requirements (Win10 system as a case in point)
1, the computer must be equipped with a computer host VGA/DVI/HDMI any two output independent graphics card interface (general entry-level graphics card support), as follows:
2, prepare VGA / DVI / HDMI any two lines, display output interface corresponding to the appearance of the connecting cable is shown below:
3, two monitors, support for VGA / DVI / HDMI any two interfaces (otherwise you need to be a VGA converter connector)
Two, dual-screen operating steps
1, first of all, the external monitor and computer Graphics card interface through the VGA / DVI / HDMI any two lines connected.
2, connected successfully, enter the computer system desktop, right-click on the desktop space to select the display settings
3, if the connection is successful, you can see that there are two monitors
4, the display interface to find the multi-display settings below the selection of the extension of these monitors, and then the two monitors can be displayed normally.
5, if the line detection is not a problem still does not show, then the mouse right-click on the desktop to select the NVIDIA control panel
6, to find the setup of multiple monitors, and then check the monitors we want to use, so that you can.
Three, multi-screen display method
Hardware requirements: In addition to support for dual-screen hardware conditions, some computers need to go into the BIOS setup to find the relevant options, if you can not find, that the motherboard does not support, please refer to the following operation.
Into the BIOS operating steps:
1, boot into the BIOS, find the Devices-Video Setup option, hit the Enter button:
2, select Select Active Video option set to IGD mode, and Multi-Monitor Support option to Enabled mode.
3. When the settings are complete, click the F10 key and select Yes to save.
4. After rebooting into the operating system, right-click on the blank space on the desktop, find the Integrated Graphics Console program from the menu, and set up Multi-Monitor Support.