Mechanical thermostat operation:
1, switching: toggle the toggle switch to the ON position, the thermostat turns on; toggle the switch to the OFF position, the thermostat turns off.
2, working mode setting: toggle the switch to COOL position, the thermostat is set to cooling mode; toggle the switch to HEAF position, the thermostat is set to heating mode.
3, temperature setting: mechanical thermostat, using the knob type to set the temperature, put the red dot against the panel labeled temperature data can be.
4, wind speed setting: toggle the switch to the LOW position; thermostat is set to low wind speed; toggle the switch to the WED position, thermostat is set to medium wind speed; toggle the switch to the HIGH position, thermostat is set to high wind speed.
Liquid crystal thermostat by the electronic logic circuit of its measured temperature and set temperature comparison, control of central air conditioning end of the fan, water valve, etc., applied to hotels, office buildings, shopping malls, industrial, medical and especially villas and other civilian buildings, so that the controlled environment temperature is constant for the set temperature range, this thermostat is equipped with a remote control, you can realize the control of the long-distance range.
Temperature controller
Temperature controller, according to the temperature change of the working environment, the physical deformation occurs inside the switch, which produces some special effects, resulting in a series of automatic control components of the conductive or disconnecting action, also known as the temperature switch, temperature protector, temperature controller, or temperature controller, referred to as the thermostat.