1, water treatment: water used in two parts. One part is condenser water, without any pollution. The other part is dust removal water, is recycled water, only evaporation, no emissions.
2, slag treatment: there are two parts of the production process slag. One is the slag discharged from the reactor, high temperature, non-toxic and tasteless, can be used for chemical work carbon black, can also be used for building materials. Secondly, there is slag left over from burning coal, which can be used for building materials. The two do not have any emissions.
3, exhaust gas treatment: three parts: First, the feed inlet leaks out a very small amount of water vapor and a small amount of oil and gas, recovered by the extraction hood through the secondary combustion sent to the dust collector for treatment, and secondly, when burning coal, smoke and dust from the induced draft fan to the dust collector treatment by the chimney discharge, to ensure that the smoke and dust emissions meet the relevant standards of GB13271.-2001. Thirdly, the non-recoverable natural gas (content is methane, ethane, butane, hydrogen, etc.) below C4 at room temperature and pressure coming out of the reactor is sent to the furnace through the pipeline via the firecloser to be burned by the gas lance, which is both energy-saving and environmentally friendly. In the production process, the equipment is fully sealed state operation, without any odor.
4, noise treatment: equipment selection of low-noise fan, the noise is less than 60 decibels, the power with part of the noise and the noise of the feeder are not more than 50 decibels. If there are materials and trees around the workshop greening, can ensure that the environmental noise around the plant is less than 50 decibels (daytime), 45 decibels (night). So the waste plastic oil refining equipment of Henan Shengfeng Energy Science and Technology Co., Ltd can reach the four standards of environmental protection.