IPC technical characteristics:
1, in line with the "EIA" standard steel industrial chassis, enhance the ability to resist electromagnetic interference.
2. Adopting bus structure and modular design technology, the CPU and all functional modules use the plug-in board structure with soft locking lever, which improves the anti-shock and anti-vibration ability.
3. The chassis is equipped with dual fans, positive pressure convection exhaust, and a dust filter to prevent dust.
4. Equipped with a highly reliable industrial power supply with over-voltage and over-current protection.
5. The power supply and keyboard are equipped with electronic lock switches to prevent illegal opening, closing and illegal keyboard input.
6, with self-diagnostic function.
7, optional I / O template as needed.
8, with a "watchdog" timer, in the event of a failure, without human intervention and automatic reset.
9, good openness, good compatibility, absorbing all the functions of the PC, you can directly run a variety of PC application software.
10, can be configured with a real-time operating system, easy to multi-task scheduling and running.
11, can be used passive motherboard (backplane), easy to upgrade the system.
The main structure of IPC:
1. All-steel chassis
The all-steel chassis of IPC is designed according to the standard, which is resistant to shock, vibration, and electromagnetic interference, and the passive motherboard compatible with PC-bus can be installed inside.
2, passive backplane
Passive backplane slots by the ISA and PCI bus multiple slots, ISA or PCI slot number and location according to the need to have a certain choice, the board for the four-layer structure, the middle two layers were the ground layer and the power supply layer, the structure of the board can weaken the logic signals on the board of the mutual interference and reduce the power supply impedance. The backplane can be plugged into a variety of boards, including CPU cards, display cards, control cards, I/O cards and so on.
3. Industrial power supply
AT switching power supply, the average trouble-free operation time reaches 250,000 hours.
4, CPU card
IPC's CPU card has a variety of, according to the size can be divided into long card and half-length card, according to the processor can be divided into 386, 486, 586, PII, PIII motherboards, the user can be depending on their own needs to arbitrary selection. Its main features are: operating temperature 0-600C; equipped with a "watchdog" timer; low power consumption, the maximum 5V/2.5A.
5, other accessories:
IPC's other accessories are basically compatible with the PC, mainly CPU, memory, graphics cards, hard disk, floppy drives, keyboard, mouse, optical drives, monitors, etc.
The IPC is also compatible with the PC. , mouse, optical drive, monitor and so on.
Domestic manufacturers of IPCs are North China Industrial Control, Advantech, Advantech, Aires, and so on. Foreign industrial control machine Siemens is very famous. The standard length of the industrial control cabinet is 19 inches, the height of 4U.
Problem 2: what is the industrial control machine industrial control machine industrial control computer, referred to in English as IPC. To put it simply, it is the opposite of commercial computers used in special occasions of the computer, nothing more than the number of I / O ports, specifications, the ability to adapt to the environment, and other comprehensive capabilities compared to commercial computers have been greatly enhanced to meet the tasks that can not be accomplished by commercial computers. The computer can not accomplish the task. Now the industrial control machine is the industry's collective name, including a very large number of products, such as industrial tablet PCs, embedded hosts, ruggedized computers, etc. are counted, if you have to be more serious, industrial control machine now refers to the kind of larger chassis-type hosts, such as 1U, 2U, 4U, 8U on the shelf type host. There is a lot of space and strong expansion capabilities. But now this equipment is the most primitive form of industrial control machine, in addition to special occasions has been slowly eliminated, and now many companies have not done this, only some of the traditional industrial control companies still have. Do a lot of industrial computer companies, but do a better job less, a lot of small workshops along the coast just find a motherboard assembly also said to be an industrial computer, the price is also sold particularly cheap, quality, after-sales service can not be guaranteed, so you have to look for a reliable scale of the enterprise, and now do a better job there are research and development, Apache, and so on. Specifically, you go to the respective official website to understand, have the opportunity to best go to the field to visit, this kind of thing online show a lot of are false, field test is the most reliable.
Remember to adopt yo!
Question 3: Industrial computer wiki: What is an industrial computer? The difference between the ordinary computer industrial control machine that industrial control computer, but now, the more fashionable called industrial computer or industrial computer, English abbreviation IPC, the full name of the Industrial Personal puter. industrial control machine in common parlance is specially designed for the industrial site and the design of the computer. IPC's technical characteristics: 1, the use of full-steel steel in line with the "EIA" standards, the "EIA" standard. IPC technical features: 1, the use of standard "EIA" in line with the all-steel industrial chassis, enhance the ability to resist electromagnetic interference. 2, the use of bus structure and modularity. 2, the bus structure and modular design technology, CPU and each functional module are used in the plug-board structure, and with the lever soft locking, improve the shock and vibration resistance. 3, the chassis is equipped with dual fans, positive pressure convection exhaust, and equipped with dust filters to prevent dust. 4, equipped with highly reliable industrial power supply, and over-voltage, over-current protection. 5, power supply and keyboard with electronic lock switch, can prevent illegal open, close and illegal keyboard input. 6, with self-diagnostic function. 7, optional I / O template as needed. 8, with a "watchdog" timer, in the event of failure, without human intervention and automatic reset. 9, good openness, good compatibility, absorbing all the functions of the PC, can directly run a variety of PC application software. 10, can be configured with a real-time operating system to facilitate multi-task scheduling and operation. 11, can be used passive motherboard (backplane), easy to upgrade the system. Applicable fields At present, IPC has been widely used in all aspects of industry and people's lives. For example: control site, road and bridge control and toll system, medical instruments, environmental protection monitoring, communication security, intelligent traffic control system, building monitoring and security, voice call center, queuing machines, POS counters cash registers, CNC machines, gasoline dispensers, financial information processing, petrochemical data acquisition and processing, physical prospecting, field portable operations, environmental protection, military industry, electric power, railroads, highways, aerospace, subway, intelligent Buildings, outdoor advertising, and so on. Industrial computer compared with ordinary computers: industrial computer has the following characteristics: 1) the chassis adopts a steel structure, has a high degree of anti-magnetic, dustproof, anti-impact ability. 2) the chassis has a special bottom plate. (2) The chassis has a special base plate, the base plate has PCI and ISA slots. (3) The chassis has a dedicated power supply, power supply has a strong anti-interference capability. 4) Required to have a continuous long-time working ability. 5) Generally easy to install standard chassis (4U standard chassis is more common)
Question 4: What is the industrial control machine, and what is the difference between ordinary computers Industrial control machine (Industrial Personal puter, IPC) that is, industrial control computers, is a kind of bus structure, on the production process and electromechanical equipment, process equipment detection and control of the tool. Tool general term. IPC has important computer attributes and features, such as computer CPU, hard disk, memory, peripherals and interfaces, and operating systems, control networks and protocols, computing power, friendly human-machine interface. Industrial control industry products and technologies are very special, belonging to the intermediate products, is to provide reliable, embedded, intelligent industrial computers for various other industries.
Although all belong to the computer, but the ordinary home or office computer is civil grade, while the industrial control machine is industrial grade, it is in the structure of other aspects of the special requirements. From the outside, most of the ordinary computer is open, the performance of more cooling holes, only a power supply fan to the outside of the chassis to blow the wind since the cooling. The industrial control machine chassis is fully enclosed, the weight is much heavier than ordinary computer chassis, indicating that it is thicker with the plate, thicker because of the stronger, not only a power supply fan, there is also a fan used to maintain the chassis, the positive pressure of the wind volume is greater within the blowing fan. This external structure can be dustproof, but also can shield electromagnetic interference on the inside. From the power supply, the regular industrial power supply and ordinary power supply is not the same, it is used inside the resistance and capacitance and coils and other anti-shock and anti-interference than ordinary household a few levels higher. Carrying capacity is also much larger. From the inside structure is also significantly different, ordinary computers generally only a motherboard, above the CPU slot, memory slot and other standard configuration parts, others such as independent graphics cards are inserted in the expansion slot on the motherboard, and now more PCI slots, industrial control machine is different, it has a larger motherboard, also known as the passive backplane, the board does not have a lot of integrated circuits, only more expansion slots, with the CPU motherboard to be inserted into the motherboard. CPU motherboard to be inserted in a special slot on this motherboard, other expansion boards should also be inserted in the motherboard, rather than the motherboard. The advantage of this is that with the motherboard can be a better screen off the outside world interference, because the industrial control machine work occasions sometimes more harsh interference is more, so that the main analyzer can make more reliable work, at the same time, a large motherboard more also easier to expand other plug-ins. This allows designers to have more choices when developing a system without having to consider whether or not there is space to put it down.
Beijing Zhihuilian Technology specializes in the research and development, production and sales of industrial motherboards, industrial computers, fanless industrial controllers, industrial control industry leader! For more information, please contact: 400-000-0156 gecpc
Question 5: What is the "4U" of the industrial computer u (unit abbreviation) is a unit that indicates the external dimensions of the combined rack, the detailed dimensions of which are determined by the Electronic Industries Association of America (eia) as an industry group.
The specified dimensions are width (48.26 cm = 19 inches) and height (a multiple of 4.445 cm). Since the width is 19 inches, racks that meet this requirement are sometimes referred to as "Christine 9-inch racks". Thickness is measured in base units of 4.445cm; 1u is 4.445cm, 2u is 1u times 8.89cm (and so on).
4U is 17.78CM
Problem six: industrial control machine I5 what it means The meaning should be that the industrial control machine using Intel (Intel) Core i5 cpu
Problem seven: what is the difference between the industrial control machine and plc The difference between the industrial control machine and the PLC does not lie in the appearance of what it looks like, and does not lie in the use of the working environment, but in their The function.
In terms of development, they come from different paths, PLC from the electrical logic control characterized by relays, industrial control machine from the computer.
Early PLC can only be used for logic operations, now more powerful, but in general, is still suitable for sequential control-based automation projects, such as process industries. As a control device, ICPC is mainly used for process control-based automation projects, such as the chemical industry. Industrial control machine as a human interface to the upper computer, that is only quite a PC, and the control function has nothing to do with the relationship.
Question 8: What is the difference between an industrial computer and an ordinary desktop computer Industrial control machine (Industrial Personal puter-IPC) is a reinforced enhanced personal computer, it can be used as an industrial controller in the industrial environment and reliable operation. As early as in the early 80s, the United States AD company launched a similar IPC MAC-150 industrial control machine, followed by the United States IBM officially launched industrial personal computer IBM7532. due to the IPC's reliable performance, rich software, low price, and in the industrial control machine in the emergence of a new generation, and later, the application of a wider and wider. At present, IPC has been widely used in communications, industrial control sites, road and bridge tolls, medical, environmental protection and all aspects of people's lives.
Technical characteristics of IPC:
1, in line with the "EIA" standard of all-steel industrial chassis, enhance the ability to resist electromagnetic interference.
2. Adopting bus structure and modular design technology, the CPU and all functional modules use the plug-in board structure with soft locking lever, which improves the anti-shock and anti-vibration ability.
3. The chassis is equipped with dual fans, positive pressure convection exhaust, and a dust filter to prevent dust.
4. Equipped with a highly reliable industrial power supply with over-voltage and over-current protection.
5. The power supply and keyboard are equipped with electronic lock switches to prevent illegal opening, closing and illegal keyboard input.
6, with self-diagnostic function.
7, optional I / O template as needed.
8, with a "watchdog" timer, in the event of failure, without human intervention and dynamic reset.
9, openness, good compatibility, absorbing all the functions of the PC, you can directly run a variety of PC application software.
10, can be configured with a real-time operating system to facilitate multi-task scheduling and operation.
11, can be used passive motherboard (backplane), easy to upgrade the system.
The main structure of IPC:
1. All-steel chassis
The all-steel chassis of IPC is designed according to the standard, which is resistant to shock, vibration, and electromagnetic interference, and the passive motherboard compatible with PC-bus can be installed inside.
2, passive backplane
Passive backplane slots by the ISA and PCI bus multiple slots, ISA or PCI slot number and location according to the need to have a certain choice, the board for the four-layer structure, the middle two layers were the ground layer and the power supply layer, the structure of the board can weaken the logic signals on the board of the mutual interference and reduce the power supply impedance. The backplane can be plugged into a variety of boards, including CPU cards, display cards, control cards, I/O cards and so on.
3. Industrial power supply
AT switching power supply, the average trouble-free operation time reaches 250,000 hours.
4, CPU card
IPC's CPU card has a variety of, according to the size can be divided into long card and half-length card, according to the processor can be divided into 386, 486, 586, PII, PIII motherboards, the user can be depending on their own needs to arbitrary selection. Its main features are: operating temperature 0-600C; equipped with a "watchdog" timer; low power consumption, the maximum 5V/2.5A.
5, other accessories:
IPC's other accessories are basically compatible with the PC, mainly CPU, memory, graphics cards, hard disk, floppy drive, keyboard, mouse, optical drive, monitor and so on. , mouse, optical drive, monitor and so on.
Article cited from:
Question 9: What is the difference between an industrial computer and an industrial controller? Definition of industrial control machine industrial control machine that industrial control computer, but now, the more fashionable called industrial computer or industrial computer, English abbreviation IPC, full name Industrial Personal puter. industrial control machine in common parlance is designed specifically for the industrial site and the design of the computer.
Now the main domestic brands are Shuo control intelligence, EVOC, the first control of industrial control and so on.
The same thing, no difference. Just we do not know enough.
The same thing, no difference.