I: brand 316ti stainless steel
II: chemical composition
C: ≤ .8? Si≤1.? Mn≤2.? P≤.35? S≤.3? Ni 11.~14.? Cr 16.~19.
Mo 1.8~2.5? Ti≥5*C%~.7
III: Application scope: < P > Mo is added to p>316L stainless steel, so its corrosion resistance, atmospheric corrosion resistance and high temperature strength are particularly good, and it can be used under harsh and cool conditions; Excellent work hardening (no magnetism). Excellent high temperature strength. 316L stainless steel belongs to austenitic stainless steel and cannot be strengthened by heat treatment. It has good strength, plasticity, toughness, cold formability and good low temperature performance. The addition of 2% Mo on the basis of Cr18Ni8 gives the steel good reducing medium resistance and pitting corrosion resistance. It has suitable corrosion resistance in various organic acids, inorganic acids, alkalis, salts and seawater. Its corrosion resistance is much better than that of 34 in reducing acid medium. IV: Overview < P > Stainless steel has better corrosion resistance than 34 stainless steel, and it has good corrosion resistance in pulping and papermaking. Moreover, 316 stainless steel is also resistant to corrosion by ocean and aggressive industrial atmosphere. 316 stainless steel has good oxidation resistance in intermittent use below 16 degrees and continuous use below 17 degrees. In the temperature range of 8-1575℃, zui does not want to act on 316 stainless steel continuously, but when 316 stainless steel is used continuously outside this temperature range, it has good heat resistance. The carbide precipitation resistance of 316L stainless steel is better than that of 316 stainless steel, and the above temperature range can be used. Annealing is carried out in the temperature range of 185-25 degrees, then rapidly annealing, and then rapidly cooling. It has high temperature resistance, easy processing and high strength. 316L stainless steel, without post-weld annealing.