Ningxia Midea air-energy water heater is a water heater product that uses air energy for heating. Its refrigeration principle is to use "refrigerant" substances to absorb heat from the outdoor air into the room for the cooling process. At the same time, the heat generated by cooling is also recycled and used to heat water.
However, Ningxia Midea air-energy water heater may have some failures during use. The following are its possible faults and solutions:
1. Not heating properly: Check whether the power is not turned on or whether the power supply is stable, and check whether the thermostat and water heater are faulty. If it is faulty, it needs to be repaired or replaced.
2. Insufficient heating: It may be caused by insufficient water in the water tank or failure of the thermostat. The water tank can be topped up or the thermostat replaced.
3. The water temperature is too high: It may be caused by a malfunction of the thermostat or a blockage in the water supply pipe of the water heater. You can try replacing the thermostat or checking and cleaning the water supply pipe.
4. Frequent shutdown of water heater: It may be caused by fan failure or outdoor temperature being too low. You can check whether the fan is working properly or add heating measures.
In general, when a fault occurs, it should be judged according to the specific situation and dealt with as early as possible to avoid affecting the water supply. If the fault is more complicated, you can contact the manufacturer or local after-sales maintenance department for processing.