JDK-11-6A foot switch
Scope of application:
The foot switch is suitable for AC 50Hz, applicable to AC 50Hz, voltage to 380V, DC voltage 220V circuit, used to frequently turn on and off the on-load circuit.
Use:
Mainly used in the control circuit to control the motor inverted, smooth, stopping operation, but also can be adapted for the main circuit to directly control the small motor inverted, smooth, stopping operation.
Applicable to the table drill, instrumentation machine tools, wire machine, shearing machine, hydraulic machine, medical equipment, etc. to manipulate the motor's working status by foot pedal.
When the changeover is used for direct control of small motors in the main circuit, the front end of the incoming power supply line must be equipped with fuses and disconnecting switches. Because this switch has a phase of power directly into the motor, the isolation switch must be cut off during maintenance to ensure personal safety.
Product features:
Used to frequently connect and disconnect on-load circuits;
According to the equipped travel switch, it can be customized to have a contact self-locking function, which can be achieved by operating the pedal so that the contact is locked, and unlocked by the second operating pedal to achieve the OFF-ON-OFF alternating or start/stop operation mode;
The pedal's anti-slip design makes operation more effective, convenient and safe. Operation is more effective, convenient and safe;
Adopting double silicone rubber gasket, the waterproof grade can reach IP67, which ensures high reliability and safety, and adopting limit switch action mode to realize high reliability;
The limit switch adopts adjustable mechanical memory structure, reliable performance and high sensitivity.
YDT1-14 foot switch
Scope of application:
YDT1 series of foot switches are suitable for AC 50Hz or 60Hz, rated operating voltage AC380V or DC220V, Ith: 5A in the control line, as the control of machine tool electrics, medical equipment, etc. Used as a control device.
YDT1 series foot switch normal operation at an altitude of not more than 2000m, the surrounding temperature -30 ℃ - +40 ℃, the relative humidity of the air is not more than 85%, the protection level IP41.
Switch according to GB14048.5 and related standards design, manufacture and inspection.
Use:
Applicable to AC 50~60Hz;AC380V;DC220V;current 5A in the control line; as the control of machine tool electrics, medical equipment and so on.
Product features:
Used to frequently connect and disconnect the on-load circuit;
Pedal anti-slip design, so that the operation of the more effective, convenient, safe;
Used a double silicone rubber gasket, so that the waterproof level can be up to IP67, which ensures a high degree of reliability and safety, the use of limit switches to achieve a high degree of reliability in the way of action;
LT1-11 foot switch
Scope of application:
Applicable to AC 50Hz, voltage up to 380V, DC voltage 220V circuits, used to frequently turn on and off the on-load circuit.
Use:
LT1-11 foot switch is suitable for AC 50Hz, voltage up to 380V, DC 220V, rated current 10A as a conversion control circuit.
Product features: for AC 50 Hz or thermal current of 5 amperes in the control circuit, the mechanical signal is converted into an electrical signal to control various types of mechanical movement. Such as pressure machinery, fusion machinery, handling machinery, automation machinery, tapping machinery, test equipment, medical machinery and various production lines. The shell, pedal and protective cover of the foot switch are all made of cast iron, with high strength, suitable for any position on the ground, and can be used without fixation. The foot switch has made comprehensive experiments on the height, size, action force and recovery force of the pedal, which is easy to step on without fatigue. The height between the shield of the foot switch and the pedal is moderate, suitable for any area safety boots.
Introducing the above types of switches, I think we all have an understanding of their scope of application, use and product features. Different models of foot switches are suitable for use in different voltages and currents and for different purposes. Product characteristics of some models are suitable for large-scale machinery, the models are more or less different from each other. In the purchase of large-scale equipment at the same time should also be equipped with the corresponding foot switch, in the purchase of foot switches should also fully consider the conditions of use, in order to prepare to buy the appropriate foot switch.