Jiaxing's
Haiyan Economic Development Zone was established in July 1992 and was approved as a provincial economic development zone in August 1994. The short-term planned area is 16.91 square kilometers (including 4.41 square kilometers in the old area and 12.5 square kilometers in the Hangzhou Bay Bridge New Area). The long-term planned area is 30.11 square kilometers, including 25.7 square kilometers in the Hangzhou Bay Bridge New Area.
Since its establishment, Haiyan Economic Development Zone has adhered to “focusing on improving the quality of foreign investment, developing modern manufacturing, optimizing the export structure, devoting itself to the development of high-tech industries, and striving to develop High value-added service industry, and promote the transformation of the development zone into a multi-functional comprehensive industrial zone. The district construction policy of "three main points, two efforts, and one promotion" focuses on platform construction on one hand and investment promotion on the other. Certain results have been achieved.
1. The development platform has been initially formed.
As of the end of June 2006, the district had invested a total of 1.085 billion yuan in infrastructure construction, with a developed area of ??8.5 square kilometers and a built area of ??7.87 square kilometers (old district: 4.41 square kilometers, new district: 3.46 square kilometers). kilometer). Among them, the old district has completed the construction of 13 vertical and 11 horizontal main trunk roads with a total length of 29.20 kilometers, basically completing the construction of seven connections and one level in the district, forming a new urban area with coordinated development of secondary and tertiary industries, industry and trade, culture, education, and administration. ; The new district has completed the construction of nearly 20 kilometers of main and branch roads and some water supply and drainage facilities.
2. The agglomeration of domestic and foreign capital industries has accelerated.
As of the end of June 2006, the region has introduced the most advanced products including Ronglian Ceramics, Pubo Motor, Fengjian Hardware, Jingbin Mold, India Sunderland, Dalian Shide, Ji'an Paper Containers, There are 101 domestic and foreign-funded projects such as Pacific Energy of the United States and Danfoss of Denmark, including 12 domestic-funded projects with a planned total investment of 4.5 billion yuan and a completed investment of 2 billion yuan; 89 foreign-funded projects (29 projects with a total investment of more than 10 million US dollars), with a planned The total investment is US$815.27 million, the cumulative contracted foreign investment is US$401.17 million, and the actual foreign investment in place is US$169.5 million.
By the end of June 2006, the region had basically formed five pillar industries: general parts manufacturing (fasteners, standard parts, etc.), new building materials, clothing and toys, electronic instruments, papermaking and paper products .
In the old district, an industrial park featuring standard parts has been basically completed. The park has gathered 53 domestic and foreign-funded enterprises such as Huiyou, Fengjian, Yonggu, and Zhejiang Sunderland, forming an industrial park. A number of supporting industries, such as steel supply, wire drawing, printing, electroplating, molds, etc. Among them, there are 20 standard parts manufacturing companies, 5 tool and mold manufacturing companies, 3 steel supply and wire drawing companies, 3 electroplating and heat treatment companies, and 3 of Haiyan's 7 leading standard parts companies have settled in the standard parts industrial park. In 2005, the standard parts industrial park achieved an industrial output value of 1.53 billion yuan.
In the new area, five major characteristic industry projects are gathering at an accelerated pace.
1. The construction of papermaking base is advancing steadily.
The second phase of the paper container project in Ji'an, Zhejiang, with a planned total investment of 5 billion yuan, is the largest domestic investment project outside the county introduced by Haiyan County so far. The first two sub-projects, namely the high-strength corrugated paper project with an annual output of 300,000 tons and the supporting 42,000 kilowatt/hour self-contained thermal power plant project, were included in the key industrial construction projects of Zhejiang Province in 2004 and started in September 2004. Civil construction started. By late April 2006, civil construction and equipment installation had been completed and trial production had been put into operation. At present, the high-strength corrugated paper project with an annual output of 300,000 tons is in normal operation, with a daily production capacity of 500 tons. The self-contained thermal power plant project is currently in operation with one furnace and one machine, with a power generation capacity of 30,000 kilowatts/hour. In 2006, the company decided to invest another 950 million yuan in a new high-strength kraft paper production line project with an annual output of 450,000 tons. It plans to introduce 865 sets (sets) of key foreign equipment and 2,113 sets (sets) of domestic advanced equipment. It is planned to officially start construction in October 2006.
The company's planning goal is to invest a total of 5 billion yuan, introduce 6 of the most advanced papermaking equipment production lines at home and abroad, adopt the most advanced technological processes, and build a modern, high-tech papermaking production base with an annual output of 1.8 million tons, striving to achieve the goal of building a modern, high-tech papermaking production base with an annual output of 1.8 million tons. During the year, it ranked among the top five enterprises in the national papermaking industry.
In addition, the technical transformation project of Haiyan Hongtai Paper Co., Ltd.'s 45,000-ton kraft paperboard production line with an annual output was completed in March 2006 and construction started. The total investment in the project is 20 million yuan and it will be put into normal production at the end of 2006.
2. Construction of new energy equipment production base kicked off
On May 29, 2005, Jiaxing Pacific Energy Equipment Co., Ltd., a wholly-owned subsidiary of Pacific Manufacturing (Group) Company of the United States, started construction Construction, with a total investment of US$29.8 million, the project is mainly engaged in the research, production and sales of solar power generation equipment. Once fully put into operation, it can produce 2 million sets of solar power generators per year. It is a new energy and high-tech industry encouraged by the state, with 100 products. Export was included in the key industrial construction projects of Jiaxing City in 2005. After nearly a year of preparation, the company's No. 2 factory building and comprehensive building have been completed and officially put into operation on May 8, 2006. The first batch of 4,000 solar photovoltaic power generators was exported to the United States in late May. At the same time, another wholly-owned enterprise funded by the company, Jiaxing Pacific Solar Cell Co., Ltd., has also been registered. It plans to invest a total of US$29.98 million and build 9 new solar cell production lines. Once put into operation, it can produce 160 million solar cells annually. piece. The project was approved for approval in July 2005 and is scheduled to start construction in the second half of 2006.
3. The new building materials industry has begun to take shape
Oriental Dagang Shide High-tech Industrial Park is invested and constructed by Dalian Shide Group, a well-known comprehensive enterprise group in the country, and plans to develop new building materials Based on this, we will build one of the largest new building materials bases in China. From the start of construction at the end of 2002 to the first half of 2006, the industrial park has completed the construction of 300,000 square meters of standard factory buildings and comprehensive office buildings, and the 110KV substation equipment has also been installed and put into use. At present, the production line of new profiles (42 pieces) with an annual output of 80,000 tons in Factory No. 6 has been put into production; the production line of American profiles (66 pieces) with an annual output of 80,000 tons in Factory No. 2 is preparing to install equipment and is planned to be put into production before the end of 2006. As of the end of June 2006, the industrial park had completed a cumulative investment of 1.426 billion yuan, of which nearly 800 million yuan was invested in equipment.
IV. The construction of the chemical park is accelerating
In order to connect well with the industries in Jiaxing Port Area of ??Binhai New Area, Haiyan Economic Development Zone is adjacent to Jiaxing Port Area Jiahua Group in Hangzhou Bay Bridge New Area A chemical industry park is planned nearby, and two chemical companies in Haiyan County, the first batch to enter the park, have already entered the area for construction. Among them: the overall relocation project of Haiyan Boda Fine Chemical Co., Ltd. (formerly Haiyan Pesticide Factory) with a total investment of 102.4 million yuan was officially started on June 28, 2005. The project covers an area of ??72.2 acres, including 37,500 square meters of new factory buildings. After nearly After one year of intense construction, it was completed and put into trial production on June 19, 2006. At the same time, the relocation and technical transformation project of Haiyan County Fine Chemical Co., Ltd. with a total investment of 42 million yuan has also completed the project land supply of 25.6 acres and preparatory work before the start of construction. Construction started in July 2006.
In order to speed up the concentration of chemical projects in the Hangzhou Bay Daqiao New District Chemical Industry Park, since the second half of 2005, Daqiao New District has introduced four more chemical companies to invest in the area: (1) Zhejiang Jiahua Group Co., Ltd. Fine chemical production line project with an annual output of 39,000 tons. The total planned investment of the project is 212 million yuan, covering an area of ??140 acres. The project environmental assessment and project approval have been completed, and the land use indicators are being submitted for approval. Construction is expected to start in August. (2) The foreign-funded enterprise Jiaxing Nuocheng Technology Development Co., Ltd. has an annual production capacity of 400 tons of hexafluoropropane (HFPO), 200 tons of hexafluoropropylene copper (HFA), and 100 tons of bisphenol AF (BPAF). The project has a planned total investment of US$3 million and covers an area of ??33.35 acres. Construction started in August 2006.
(3) Nickel-containing waste treatment production line construction project of Zhejiang Tellus Metal Chemical Co., Ltd. The total planned investment of the project is 60.62 million yuan, covering an area of ??47 acres. Construction started in August 2006. (4) The foreign-funded enterprise Jiaxing Hongyi Chemical Co., Ltd. has an annual output of 1,000 tons of trifluorochloric acid production line project. The project plans to have a total investment of US$20 million and cover an area of ??70 acres.
5. Rapid development of machinery (fasteners) industrial base
The standard fastener industry has always been the traditional advantageous industry of Haiyan Hangzhou Bay Bridge New District, especially Jiaxing Brothers Standard Parts Co., Ltd., Haiyan Yuxing Nut Co., Ltd., Zhejiang New Oriental Fastener Co., Ltd. and Haiyan Daewoo Standard Parts Co., Ltd. as leading companies. The machinery (fastener) industry has become a pillar industry of Haiyan's local economy. In recent years, six machinery (fastener) projects have settled in Daqiao New Area, mainly:
The first is Zhejiang New Oriental Fastener Co., Ltd. The Sino-foreign joint venture Zhejiang New Oriental Fastener Co., Ltd. was established in the New District in September 2002 with a planned total investment of US$6.4 million, covering an area of ??125 acres. By the end of June 2006, an actual investment of 60.63 million yuan had been completed, with a new factory area of ??35,000 square meters. , most of the workshops and equipment have been put into use and were fully completed by the end of 2006. Second, the metal surface treatment project of Zhejiang Morgan Technology Development Co., Ltd., a joint venture between Jiaxing Brothers Standard Parts Co., Ltd. and American businessman Mr. Chen Morgan, has completed project approval. The project plans a total investment of US$15 million and covers an area of ??111 acres. In 2006 Construction started in August. Third, the Zhejiang Laibao Hardware Manufacturing Co., Ltd. has an annual output of 40,000 tons of high-strength fasteners (bolts) production line project introduced by Haiyan Daewoo Standard Parts Co., Ltd. and is jointly invested by businessmen from the United States and Russia. The total planned investment of this project is US$26 million. Covering an area of ??108 acres, construction started in August 2006. The fourth is a new low-carbon high-strength fastener project invested by Zhejiang Guorui Industrial Co., Ltd. with a planned total investment of US$29.8 million. The first phase of the project covers an area of ??23 acres and construction started in August 2006. Fifth, the new Haiyan high-strength fastener production project and high-end hardware products and supporting hot-dip galvanizing projects planned to invest 350 million yuan by Zhejiang Youli Standard Parts Co., Ltd. and (U.S.) Yamei International Trading Co., Ltd. have also been completed. Signed the contract. Sixth, in July 2005, KraussMaffei (Zhejiang) Co., Ltd., a joint venture between Zhejiang Dongfang Dagang Plastic Pipe Fittings Co., Ltd. and KraussMaffei China Co., Ltd., was officially established in Daqiao New District, with new water-saving irrigation technology equipment. The production line project has been approved for project approval in 2005. With a total investment of US$9.2 million, the project introduces world-class mechanical equipment and manufacturing technology from Germany and engages in the manufacturing and research and development of new water-saving irrigation equipment, plastic extrusion molding machinery, molds, etc. As of August 2006, the project has completed the construction of 14,000 square meters of steel structure workshops, with a cumulative total of 14,000 square meters of steel structure workshops in Ningbo. You can take a good look at the professional and work content of each company. Please explain and prepare in advance;
Electronics and machinery are two major areas of Xiamen! You will know when you return to Xiamen
I am in Xiamen Software Park. If you don’t understand, you can find me through Baidu messages~