Computer case installation method

Installing the computer case is the first step in assembling the computer, because all components of the computer need to be installed in the case. The following describes the installation method of the computer case in detail.

1. Tool preparation

Before installing the computer case, you need to prepare some tools, including screwdrivers, pliers, tweezers, etc. You also need to prepare some fixing screws and necessary cables.

2. Chassis installation

1. First open the computer motherboard package, take out the motherboard, and check whether the motherboard is intact. Then fix the motherboard in place on the chassis and secure it with the fixing screws.

2. Next install the power supply, usually placed at the bottom of the chassis. Insert the power plug into the power connector on the motherboard and secure it to the case.

3. The hard disk and optical drive also need to be installed in the chassis. Use screws to secure the hard drive and optical drive in place on the case, then connect them to the motherboard.

4. Install the graphics card. Insert the graphics card into the graphics card slot on the motherboard and secure it in the case with the captive screws.

5. Next install the radiator and fan in the chassis. Install the radiator and fan into the radiator slot and fan slot on the motherboard according to the instructions, and secure them to the chassis.

6. Finally, install the chassis shell and tighten the screws.

3. Cable connection

1. Connect the power cord. Plug the power connector into a power outlet and connect it to the motherboard.

2. Connect the monitor. Insert the monitor plug into the video slot.

3. Connect the keyboard, mouse and audio device. Use USB plugs to connect your keyboard and mouse, and audio plugs to connect your audio equipment.

4. Start the computer

After completing the above steps, press the power button to start the computer. Check whether the components and connecting lines are well connected. Go through the computer self-test system. If everything is normal, that is The startup is successful and the system enters the desktop.