Can I learn programming on a laptop?
You can do simple programming, but if you are a professional programmer, it is not recommended to use a laptop for programming.
The reason is very simple:
First of all, programming uses a lot of ide, are large software, thin and light laptop at the same time to open the software, not run.
Secondly, it is inevitable to install a database on the computer, which also requires a high configuration of the computer.
As well as, do virtual machine running linux/unix system, the computer to support up, notebook dual-core 2.4G +512G SSD +16G memory run up to normal, notebook dual-core 2.9G +7200 rpm 500G mechanical hard disk +8G memory this machine start these software are going to spend 5 minutes, not to mention the thin and light book
Programming What configuration does the computer need?
Configuration: i5 or above processor, more than 8G of memory (recommended 16G), hard disk 256G or above, solid state drive is the best, 64-bit Window system. (If you buy a laptop, it is recommended that you buy a model with expandable memory)
Programming is the Chinese abbreviation for programming, which is the process of letting a computer code solve a problem, specifying a certain way of computing for a certain computing system, so that the computing system can run according to that way of computing, and finally get the corresponding results.
plc programming usually use which kind of laptop and network port?
plc programming is generally done on Lenovo laptops, and as for the network port, com1 is often used to communicate with the plc. Lenovo has a balanced configuration on the laptop, and the price knife cuts the right way, so the shipment is objective.
Processing center programming laptop configuration?
Answer: machining center programming laptop configuration is as follows: CPUAMDPhenomX38450585, motherboard GIGABYTE GA-MA790GP-DS4H899, memory Jinteki Panhoo 2GDDR2800 * 2.
The most important is the CPU, graphics card these 3 pieces, recommended CPU Intel i3 processor or more, or else Calculation speed will be very slow, discrete graphics card with 1G or more memory, memory 4G or more CNC programming drawing for vector graphics in general, do not need a very high configuration.
Learning PLC programming needs what configuration of the laptop?
PLC programming computer configuration requirements are not very high, usually more than three thousand yuan laptop can be competent, such as: Shenzhou K650D-G4D2, 15.6-inch 1920 × 1080 screen, desktop-level Pentium G4560 dual-core four-threaded, 4G memory, 500G hard disk, GTX950M/4G unique display, 3499 yuan about the performance of this notebook! This Pentium G4560 processor is powerful enough, and the price is also very affordable, this Pentium G4560 processor is still using the Pentium title, but it is a dual-core quad-threaded (proper i3 standard, just instruction set shrinkage/weak nuclear display a little)